journal article·2014-02

Phase-Dependent Tensile Properties of 9Cr-1Mo(V, Nb) Ferritic/Martensitic Steel

Santosh Kumar, Ram Pratap Kushwaha, Bikas Chandra Maji, Karanam Bhanumurthy, Gautam Kumar Dey

Publisher page

Abstract

Phase-dependent tensile properties of 9Cr-1Mo(V, Nb) ferritic/martensitic steel were evaluated in the temperature range 300 K to 1073 K (27 °C to 800 °C) to quantify differences in the tensile behavior of different phases of this material. The results showed considerable difference in the tensile properties such as yield strength, ultimate tensile strength, and elongation of the three phases of this material—tempered martensite, metastable austenite, and martensite—which can exist at a common temperature. This has been discussed on the basis of structural hysteresis in this material when subjected to thermal cycles causing excursions across various phase fields.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. A. Shibli, and F. Starr: Int. J. Press. Vessels Pip. 2007, vol. 84, 1-2, pp. 114-22.10.1016/j.ijpvp.2006.11.002 ↗
2. R. L. Klueh, and A. T. Nelson: J. Nucl. Mater., 2007, vol. 371, issue 1-3, pp. 37-52.10.1016/j.jnucmat.2007.05.005 ↗
3. H. Tanigawa, K. Shiba, A. Möslang, R.E. Stoller, R. Lindau, M.A. Sokolov, G.R. Odette, R.J. Kurtz, and S. Jitsukawa: J. Nucl. Mater., 2011, vol. 417, issue 1-3, pp. 9-15.10.1016/j.jnucmat.2011.05.023 ↗
4. Santosh Kumar, A. Kundu, K. A. Venkata, A. Evans, C. E. Truman, J. A. Francis, K. Bhanumurthy, P. J. Bouchard, and G. K. Dey, Mater. Sci. Eng. A, 2013, vol. 575, pp. 160-68.10.1016/j.msea.2013.03.046 ↗
5. B. J. Ganesh, S. Raju, A. K. Rai, E. Mohandas, M. Vijayalakshmi, K. B. S. Rao, and B. Raj: Mater. Sci. Technol., 2011, vol. 27, no. 2, pp. 500-12.10.1179/026708309X12506933873260 ↗
6. K. Haarmann, J. C. Vailant, W. Bendick, and A. Arbab, The T91/P91 Book, Vallourec and Mannesmann Tubes, Boulogne, 1999, pp. 14-29.
7. M. C. Tsai, C. S. Chiou, J. S. Du, and J. R. Yang: Mater. Sci. Eng. A, 2002, vol. 332, issue 1–2, pp. 1-10.10.1016/S0921-5093(01)01710-5 ↗
8. F. Xiao, B. Liao, G. Qiao, and S. Guan: Mater. Charact., 2006, vol. 57, issue 4-5, pp. 306-13.10.1016/j.matchar.2006.02.003 ↗
9. N. Tsuji, and T. Maki: Scripta Mater., 2009, vol. 60, pp. 1044-49.10.1016/j.scriptamat.2009.02.028 ↗
10. H.G. Lambers, S. Tschumak, H.J. Maier, and D. Canadinc: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1355-66.10.1007/s11661-009-9827-z ↗
11. T.S. Wang, M. Zhang, Y.H. Wang, J. Yang, and F.C. Zhang: Scripta Mater., 2013, vol. 68, issue 2, pp. 162-65.10.1016/j.scriptamat.2012.10.016 ↗
12. Y. Yogo, M. Kamiyama, T. Iwata, N. Iwata, and T. Ishikawa: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 893-99.10.1007/s11661-011-0919-1 ↗
13. A. H. Yaghi, T. H. Hyde, A. A. Becker, J.A. Williams, and W. Sun: J. Mater. Process. Technol., 2005, vol. 167, issue 2–3, pp. 480-87.10.1016/j.jmatprotec.2005.05.036 ↗
14. D. Dean, and M. Hidekazu: Comput. Mater. Sci., 2006, vol. 37, issue 3, pp 209-19.10.1016/j.commatsci.2005.06.010 ↗
15. K. Seok-Hoon, K. Jong-Bum, and L. Won-Jae: J. Mater. Process. Technol., 2009, vol. 209, issue 8, pp. 3905-13.10.1016/j.jmatprotec.2008.09.012 ↗
16. G. E. Dieter: Mechanical Metallurgy, SI Metric ed., McGraw Hill Book Company, Singapore, 1988, pp. 281.
17. R. W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley, New York 1995, pp. 62-64.