Effect of Temperature on Stress Oxidation Behaviors of 2D C/SiC-BC x Composite in Wet Oxygen Atmosphere
Source abstract
Abstract
The effect of temperature on stress oxidation behaviors of 2D C/SiC-BC x composites was investigated. The results indicate that the damage rate of 2D C/SiC-BC x composites increases with increasing oxidation temperature. The residual tensile strengths of 2D C/SiC-BC x composites show nonlinear change with increasing oxidation time. At 973.15 K (700 °C) and 1173.15 K (900 °C), the residual strengths of 2D C/SiC-BC x composites increase firstly and then decrease with increasing oxidation time. At 1473.15 K (1200 °C), the residual strengths are zero after stress oxidation for 9 hours. The oxidation of BC x layer aggravates, and the glass phase becomes more obvious with increasing oxidation temperature. At the same time, the oxidation damage of 2D C/SiC-BC x composites becomes more serious.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. R. Naslain: Compos. Sci. Technol., 2004, vol. 64, pp. 155–70.10.1016/S0266-3538(03)00230-6 ↗
2. P. Xiao, Z. Li, Z.B. Zhu, and X. Xiong: J. Mater. Sci. Technol., 2010, vol. 26, pp. 283–88.10.1016/S1005-0302(10)60047-3 ↗
3. S. Kumar, A. Kumar, G. Rohini Devi, and A.K. Gupta: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6210–16.10.1016/j.msea.2011.04.063 ↗
4. L. Quemard, F. Rebillat, A. Guette, H. Tawil, and C. Louchet-Pouillerie: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 377–88.10.1016/j.jeurceramsoc.2006.02.042 ↗
5. F. Lamouroux, S. Bertrand, R. Pailler, and R. Naslain: Key Eng. Mater., 1999, vol. 164–165, pp. 365–368.10.4028/www.scientific.net/KEM.164-165.365 ↗
6. F. Lamouroux, S. Bertrand, R. Pailler, R. Naslain, and M. Cataldi: Compos. Sci. Technol., 1999, vol. 59, pp. 1073–85.10.1016/S0266-3538(98)00146-8 ↗
7. J.P. Viricelle, P. Goursat, and D. Bahloul-Hourlier: Compos. Sci. Technol., 2001, vol. 61, pp. 607–14.10.1016/S0266-3538(00)00243-8 ↗
8. L. Quemard, F. Rebillat, A. Guette, H. Tawil, and C. Louchet-Pouillerie: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 2085–94.10.1016/j.jeurceramsoc.2006.06.007 ↗
9. F.A. Christin: Int. J. Appl. Ceram. Technol., 2005, vol. 2, pp. 97–104.10.1111/j.1744-7402.2005.02011.x ↗
10. E. Bouillon, G. Ojard, Z. Ouyang, L. Zawada, G. Habarou, C. Louchet, D. Feindel, P. Spriet, C. Logan, T. Arnold, K. Rogers, and D. Stetson: Proc. of GT2005, ASME Turbo. Expo. 2005, 2005, June 6–9, USA, GT2005-68428, pp. 293–300.
11. Y.S. Liu, L.T. Zhang, L.F. Cheng, X.G. Luan, W.B. Yang, W.H. Zhang, and Y.D. Xu: Mater. Sci. Eng. A, 2008, vol. 498, pp. 430–36.10.1016/j.msea.2008.08.022 ↗
12. Y.S. Liu: PhD Thesis, Northwestern Polytechnical University, 2008, pp. 118–148 (in Chinese).
13. W.B. Yang: PhD Thesis, Northwestern Polytechnical University, 2009, pp. 89–147 (in Chinese).
14. Y.S. Liu, L.F. Cheng, L.T. Zhang, W.B. Yang, S.T. Zhou, and W.H. Zhang: J. Compos. Mater., 2012, vol. 46, pp. 1251–60.10.1177/0021998311417644 ↗
15. Y.S. Liu, L.F. Cheng, L.T. Zhang, W.B. Yang, S.T. Zhou, and W.H. Zhang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1436–41.10.1016/j.msea.2010.10.045 ↗
16. W.H. Zhang, L.F. Cheng, Y.S. Liu, L.T. Zhang, W.B. Yang, and S.T. Zhou: Mater. Sci. Eng. A, 2011, vol. 530, pp. 297–303.10.1016/j.msea.2011.09.089 ↗
17. X.G. Luan, L.F. Cheng, and C.W. Xie: Compos. Sci. Technol., 2013, vol. 88, pp. 178–183.10.1016/j.compscitech.2013.09.001 ↗
18. X.G. Luan, L.F. Cheng, J. Zhang, J.Z. Li, and L.T. Zhang: Compos. Sci. Technol., 2010, vol. 70, pp. 678–84.10.1016/j.compscitech.2009.12.025 ↗
19. M. C. Halbig, J. D. McGuffin-Cawley, A. J. Eckel and D. N. Brewer: J. Am. Ceram. Soc., 2008, vol. 91, pp. 519–26.10.1111/j.1551-2916.2007.02170.x ↗
20. H. Mei: Adv. Appl. Ceram., 2009, vol. 108, pp. 123–27.10.1179/174367608X324045 ↗
21. S.W. Li, L.T. Zhang, Y.S. Liu, L.F. Cheng, Z.D. Feng, X.G. Luan, W.H. Zhang, and W.B. Yang: J. Inorg. Mater., 2010, vol. 25, pp. 1199–203 (in Chinese).10.3724/SP.J.1077.2010.01199 ↗