journal article·2004-01

Effect of temperature and strain rate on the compressive flow of aluminum composites containing submicron alumina particles

M. Kouzeli, D. C. Dunand

Publisher page

Abstract

Uniaxial compression tests were conducted on aluminum composites containing 34 and 37 vol pct submicron alumina particles, to study the effect of temperature and strain rate on their flow stress. For temperatures between 25 °C and 600 °C and strain rates between 10−3 and 1 s−1, the flow stress of the composites is significantly higher than that of unreinforced aluminum tested under similar conditions. This can be attributed to direct strengthening of the composites due to load sharing between the particles and the matrix, and an enhanced in-situ matrix flow stress resulting from a particle-induced increase in dislocation density. The composites, however, exhibit the same stress dependence on temperature and strain rate as unreinforced aluminum, indicating a common hardening mechanism, i.e., forest dislocation interactions. The forest hardening present under the explored testing conditions masks the effects of direct dispersion strengthening operative at lower deformation rates in these materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. E. Arzt: Acta Mater., 1998, vol. 46, pp. 5611–26.10.1016/S1359-6454(98)00231-6 ↗
2. R.B. Calhoun and D.C. Dunand: in Comprehensive Composite Materials, A. Kelly and C. Zweben, eds., Elsevier Science, New York, NY, 2000, vol. 3, pp. 27–59.10.1016/B0-08-042993-9/00002-4 ↗
3. A.M. Brown and E.M. Klier: U.S. Patent No 5,511,603, 1996.
4. A.M. Redsten, E.M. Klier, A.M. Brown, and D.C. Dunand: Mater. Sci. Eng., 1995, vol. A201, pp. 88–102.10.1016/0921-5093(94)09741-0 ↗
5. A.M. Jansen and D.C. Dunand: Acta Mater., 1997, vol. 45, pp. 4583–92.10.1016/S1359-6454(97)00136-5 ↗
6. D.C. Dunand and A.M. Jansen: Acta Mater., 1997, vol. 45, pp. 4569–81.10.1016/S1359-6454(97)00135-3 ↗
7. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 1993, pp. 117–58.10.1017/CBO9780511623080.006 ↗
8. B.Q. Han and T.G. Langdon: Mater. Sci. Eng., 2002, vol. A322, pp. 73–78.10.1016/S0921-5093(01)01119-4 ↗
9. S. Spigarelli, M. Cabibbo, E. Evangelista, and T.G. Langdon: Mater. Sci. Eng., 2002, vol. A328, pp. 39–47.10.1016/S0921-5093(01)01698-7 ↗
10. M. Kouzeli and D.C. Dunand: Acta Mater., in press.
11. S.L. Semiatin and J.J. Jonas: Formability and Workability of Metals. Plastic Instability and Flow Localisation, ASM, Metals Park, OH, 1984.
12. C.H. Karnes and E.A. Ripperger: J. Mech. Phys. Solids, 1966, vol. 14, pp. 75–88.10.1016/0022-5096(66)90038-X ↗
13. U.F. Kocks, A.S. Argon, and M.F. Ashby: in Thermodynamics and Kinetics of Slip, B. Chalmers, J.W. Christian, and T.B. Massalski, eds., Pergamon Press, Oxford, United Kingdom, 1975.
14. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps. The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982.
15. U.F. Kocks: Mater. Sci. Eng., 2001, vol. A317, pp. 181–87.10.1016/S0921-5093(01)01174-1 ↗
16. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth & Co., London, 1976.
17. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76–85.10.1115/1.3443340 ↗
18. S. Yoshida and N. Nagata: Trans. Nat. Res. Inst. Met., 1967, vol. 9, pp. 20–29.
19. M.F. Ashby: in Strengthening Methods in Crystals, A. Kelly and R.B. Nicholson, eds., Elsevier, Amsterdam, 1971, pp. 137–92.
20. M. Kouzeli and A. Mortensen: Acta Mater., 2002, vol. 50, pp. 39–51.10.1016/S1359-6454(01)00327-5 ↗