journal article·2011-03

Morphology of the Tin Whiskers on the Surface of a Sn-3Ag-0.5Cu-0.5Nd Alloy

Tung-Han Chuang, Chao-Chi Jain

Publisher page

Abstract

Rapid growth of tin whiskers has been observed on the surface of rosette-shaped NdSn3 intermetallic phase in a Sn-3Ag-0.5Cu-0.5Nd alloy after air storage. It is shown that various cross sections of NdSn3 rosettes in the solder matrix reveal different morphologies of tin whiskers, which can be classified as four types: long fibers, short fibers, tiny sprouts, and hillocks. The fibrous whiskers and tiny sprouts are found on the surfaces of specimens exposed to air at room temperature and 423 K (150 °C), while hillocks appear only after storage at 423 K (150 °C). In addition, it is observed that, in most cases, each oxidized NdSn3 intermetallic phase contains only a single whisker at its center. Through metallographic observations and chemical analyses on the cross sections of the oxidized NdSn3 intermetallics, a “successive compressive stress model” has been proposed to interpret the tin whisker growth on the surface of a rare earth (RE)–containing solder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. I.E. Anderson, J.C. Foley, B.A. Cook, J. Harringa, R.L. Terpstra, and O. Unal: J. Electron. Mater., 2001, vol. 30, pp. 1050–59.10.1007/s11664-001-0129-5 ↗
2. J. Zhao, L. Qi, X.M. Wang, and L. Wang: J. Alloy Compd., 2004, vol. 375, pp. 196–201.10.1016/j.jallcom.2003.12.005 ↗
3. B.L. Chen and G.Y. Li: Thin Solid Films, 2004, vols. 462–463, pp. 395–401.10.1016/j.tsf.2004.05.063 ↗
4. B.L. Chen and G.Y. Li: Proc. 53rd Electronic Components and Technology Conf., New Orleans, LA, 2003, pp. 1235–42.
5. X. Ma, F. Wang, Y. Qian, and F. Yoshida: Mater. Lett., 2003, vol. 57, pp. 3361–65.10.1016/S0167-577X(03)00075-2 ↗
6. K. Zeng and K.N. Tu: Mater. Sci. Eng. R., 2002, vol. 38, pp. 55–105.10.1016/S0927-796X(02)00007-4 ↗
7. M. Yamashita, S. Tada, and K. Shiokawa: Solder Alloys, Fuzi Electric. Co., U.S. Patent 6,179,935 B1, 2001.
8. K. Habu, N. Takeda, H. Wstanabe, H. Ooki, J. Abe, T. Saito, Y. Taniguchi, and K. Takayama: Proc. 1st International Symposium on Environmentally Conscious Design and Inverse Manufacturing Conf., Tokyo, Japan, 1999, pp. 606–09.10.1109/ECODIM.1999.747684 ↗
9. T.H. Chuang, S.F. Yen, and H.M. Wu: J. Electron. Mater., 2006, vol. 35, pp. 310–18.10.1007/BF02692451 ↗
10. T.H. Chuang, S.F. Yen, and H.D. Cheng: J. Electron. Mater., 2006, vol. 35, pp. 302–09.10.1007/BF02692450 ↗
11. Z.G. Chen, Y.W. Shi, Z.D. Xia, and Y.F. Yan: J. Electron. Mater., 2002, vol. 31, pp. 1122–28.10.1007/s11664-002-0052-4 ↗
12. Z. Chen, Y. Shi, and Z. Xia: J. Electron. Mater., 2004, vol. 33, pp. 964–71.10.1007/s11664-004-0023-z ↗
13. M.A. Dudek, R.S. Sidhu, and N. Chawla: JOM, 2006, vol. 58, pp. 57–62.10.1007/s11837-006-0184-8 ↗
14. T.H. Chuang and S.F. Yen: J. Electron. Mater., 2006, vol. 35, pp. 1621–27.10.1007/s11664-006-0208-8 ↗
15. T.H. Chuang: Metall. Mater. Trans. A, 2007, vol. 38A, pp.1048–55.10.1007/s11661-007-9126-5 ↗
16. T.H. Chuang, C.C. Chi, and H.J. Lin: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 604–12.10.1007/s11661-007-9426-9 ↗
17. T.H. Chuang, H.J. Lin, and C.C. Chi: J. Electron. Mater., 2007, vol. 36, pp. 1697–1702.10.1007/s11664-007-0249-7 ↗
18. T.H. Chuang, H.J. Lin, and C.C. Chi: Scripta Mater., 2007, vol. 56, pp. 45–48.10.1016/j.scriptamat.2006.08.061 ↗
19. Y.Y. Shiue and T.H. Chuang: J. Alloy Compd., 2010, vol. 491, pp. 601–17.10.1016/j.jallcom.2009.11.017 ↗