Fatigue Properties of Nitrided Ultrafine Ferrite-Cementite Steels under Rotating Bending Fatigue Testing
Source abstract
Abstract
Fatigue tests under rotating bending were conducted on nitrided ultrafine ferrite-cementite steels. The ultrafine ferrite-cementite steels included carbon-increased and phosphorus-added versions to investigate the effects of grain growth suppression during nitriding. In the carbon-increased versions, grain growth was successfully suppressed both in the nitrided layer and in the core region. On the other hand, the low-carbon versions showed grain growth in the core region, even in the phosphorus-added types, although grain growth was suppressed in the nitrided layer. In the fatigue tests, many of the nitrided specimens revealed fish-eye fractures originating from inclusions located in or beneath the nitrided layer. In spite of the occurrence of fish-eye fractures, the fatigue strength of the carbon-increased versions was markedly improved due to nitriding, whereas it was a little improved in the low-carbon versions. The fatigue strength of the nitrided specimens was closely related to hardness at the fracture origin, even when fish-eye fractures occurred. This was why nitriding markedly improved the fatigue strength of the carbon-increased versions in which grain growth was successfully suppressed and high hardness was maintained beneath the nitrided layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa: Scripta Mater., 1999, vol. 40, pp. 795–80010.1016/S1359-6462(99)00015-9 ↗
2. A. Azushima, K. Aoki, and T. Inoue: Tetsu-to-Hagané, 2001, vol. 87, pp. 762–76610.2355/tetsutohagane1955.87.12_762 ↗
3. T. Hayashi, S. Torizuka, T. Mitsui, K. Tsuzaki, and K. Nagai: CAMP-ISIJ, 1999, vol. 12, p. 385
4. A. Ohmori, S. Torizuka, K. Nagai, N. Koseki, and Y. Kogo: Tetsu-to-Hagané, 2003, vol. 89, pp. 781–8810.2355/tetsutohagane1955.89.7_781 ↗
5. S. Torizuka, E. Muramatsu, S.V.S. Narayana Murty, and K. Nagai: Scripta Mater., 2006, vol. 55, pp. 751–5410.1016/j.scriptamat.2006.03.067 ↗
6. T. Sawai, S. Matsuoka, and K. Tsuzaki: Tetsu-to-Hagané, 2003, vol. 89, pp. 726–3310.2355/tetsutohagane1955.89.6_726 ↗
7. Y. Furuya, S. Matsuoka, S. Shimakura, T. Hanamura, and S. Torizuka: Scripta Mater., 2005, vol. 52, pp. 1163–6710.1016/j.scriptamat.2005.01.035 ↗
8. Y. Furuya, S. Matsuoka, S. Shimakura, T. Hanamura, and S. Torizuka: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2984–9110.1007/s11661-007-9355-7 ↗
9. S. Nishijima, A. Ishii, K. Kanazawa, S. Matsuoka, and C. Masuda: NRIM Fatigue Data Sheet Technical Document, No. 5, National Research Institute for Metals, Tokyo, 1989
10. S. Matsuoka, N. Nagashima, and S. Nishijima: NRIM Material Strength Data Sheet Technical Document, No. 17, National Research Institute for Metals, Tokyo, 1997
11. P. De la Cruz, M. Ode´n, and T. Ericsson: Mater. Sci. Eng. A, 1998, vol. 242, pp. 181–9410.1016/S0921-5093(97)00518-2 ↗
12. K. Genel, M. Demirkol, and M. Capa: Mater. Sci. Eng. A, 2000, vol. 279, pp. 207–1610.1016/S0921-5093(99)00689-9 ↗
13. G.J. Shiflet and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1413–3210.1007/BF02672560 ↗
14. K.W. Liu and F. Mücklich: Acta Mater., 2001, vol. 49, pp. 395–40310.1016/S1359-6454(00)00340-2 ↗
15. B. Edenhofer: Heat Treat. Met., 1974, vol. 1, pp. 56–67
16. H. Miyamura, J. Takada, H. Kuwahara, and S. Kikuchi: J. Mater. Sci., 1986, vol. 21, pp. 2514–1810.1007/BF01114299 ↗
17. J. Takada, Y. Ohizumi, H. Miyamura, H. Kuwahara, S. Kikuchi, and I. Tamura: J. Mater. Sci., 1986, vol. 21, pp. 2493–9610.1007/BF01114296 ↗
18. M. Hayakawa, T. Hara, S. Matsuoka, and K. Tsuzaki: J. Jpn. Inst. Met., 2000, vol. 64, pp. 460–6610.2320/jinstmet1952.64.6_460 ↗
19. ASTM E112: Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1996
20. S. Nishijima and K. Kanazawa: Fat. Fract. Eng. Mater. Struct., 1999, vol. 22, pp. 601–0710.1046/j.1460-2695.1999.00206.x ↗
21. T. Takase, Y. Nakamura, M. Sumitomo, K. Kita, and H. Ono: J. Jpn. Inst. Met., 1976, vol. 40, pp. 663–6910.2320/jinstmet1952.40.7_663 ↗
22. T. Sasaki, T. Yamada, A. Kono, and M. Aoyagi: J. Jpn. Inst. Met., 1977, vol. 41, pp. 381–8510.2320/jinstmet1952.41.4_381 ↗
23. Y. Furuya and S. Matsuoka: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3421–3110.1007/s11661-002-0329-5 ↗
24. Y. Furuya and S. Matsuoka: Trans. Jpn. Soc. Mech. Eng., 2004, Ser. A, vol. 70–696, pp. 1058–65 (in Japanese)
25. Y. Furuya, H. Hirukawa, T. Kimura, and M. Hayaishi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1722–3010.1007/s11661-007-9225-3 ↗