journal article·2015-09

Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy

Federico Sket, Ana Fernández, Antoine Jérusalem, Jon M. Molina-Aldareguía, María Teresa Pérez-Prado

Publisher page

Abstract

A limiting factor of high pressure die cast (HPDC) Mg alloys is the presence of porosity, which has a detrimental effect on the mechanical strength and gives rise to a large variability in the ductility. The application of hydrostatic pressure after casting is known to be beneficial to improve the mechanical response of HPDC Mg alloys. In this study, a combined experimental and simulation approach has been developed in order to investigate the influence of pressurization on the 3D porosity distribution and on the mechanical behavior of an HPDC Mg AZ91 alloy. Examination of about 10,000 pores by X-ray computed microtomography allowed determining the effect of hydrostatic pressure on the bulk porosity volume fraction, as well as the change in volume and geometry of each individual pore. The evolution of the 3D porosity distribution and mechanical behavior of a sub-volume containing 200 pores was also simulated by finite element analysis. Both experiments and simulations consistently revealed a decrease in the bulk porosity fraction and a bimodal distribution of the individual volume changes after the application of the pressure. This observation is associated with pores containing internal pressure as a result of the HPDC process. Furthermore, a decrease in the complexity factor with increasing volume change is observed experimentally and predicted by simulations. The pressure-treated samples have consistently higher plastic flow strengths.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. M. Bamberger and J. Dehm: Annu. Rev. Mater. Res., 2008, vol. 38, pp. 505–33.10.1146/annurev.matsci.020408.133717 ↗
2. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
3. M. Easton, A. Beer, M.R. Barnett, C. Davies, G. Dunlop, Y. Durandet, S. Blacket, T. Hilditch, and P. Beggs: JOM, 2008, vol. 60 (11), pp. 57–62.10.1007/s11837-008-0150-8 ↗
4. D. Letzig, J. Swiostek, J. Bohlen, P.A. Beaven, and K.U. Kainer: Mater. Sci. Technol., 2008, vol. 24 (8), pp. 991–96.10.1179/174328407X213080 ↗
5. A. Hamasaiid, G. Dour, T. Loulou, and M.S. Dargusch: Int. J. Therm. Sci., 2010, vol. 49, pp. 365–72.10.1016/j.ijthermalsci.2009.07.014 ↗
6. N.A. El-Mahallawy, M.A. Taha, E. Pokora, and F. Klein: J. Mater. Proc. Technol., 1998, vol. 73, pp. 125-38.10.1016/S0924-0136(97)00221-5 ↗
7. E.M. Gutman, Ya. Unigovski, M. Levkovich, Z. Koren, E. Aghion, and M. Dangur: Mater. Sci. Eng. A, 1997, vols. 234–236, pp. 880–83.10.1016/S0921-5093(97)00363-8 ↗
8. S.G. Lee, A.M. Gokhale, G.R. Patel, and M. Evans: Mater. Sci. Eng. A, 2006, vol. 427, pp. 99–111.10.1016/j.msea.2006.04.082 ↗
9. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2006, vol. 419, pp. 297–305.10.1016/j.msea.2006.01.034 ↗
10. J.P. Weiler and J.T. Wood: J. Alloys Compd., 2012, vol. 537, pp. 133–40.10.1016/j.jallcom.2012.05.090 ↗
11. J.P. Weiler and J.T. Wood: Mater. Sci. Eng. A, 2009, vol. 527, pp. 25–31.10.1016/j.msea.2009.08.060 ↗
12. J.P. Weiler and J.T. Wood: Mater. Sci. Eng. A, 2009, vol. 527, pp. 32–37.10.1016/j.msea.2009.08.061 ↗
13. J.P. Weiler, J.T. Wood, R.J. Klassen, E. Maire, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2005, vol. 395, pp. 315–22.10.1016/j.msea.2004.12.042 ↗
14. M.F. Horstemeyer, N. Yang, Ken Gall, D.L. McDowell, J. Fan, and P.M. Gullett: Acta Mater., 2004, vol. 52, pp. 1327–36.10.1016/j.actamat.2003.11.018 ↗
15. S.G. Lee, G.R. Patel, A.M. Gokhale, A. Sreeranganathan, and M.F. Horstemeyer: Mater. Sci. Eng. A, 2006, vol. 427, pp. 255–62.10.1016/j.msea.2006.04.108 ↗
16. S.G. Lee, G.R. Patel, A.M. Gokhale, A. Sreeranganathan, and M.F. Horstemeyer: Scripta Mater., 2005, vol. 53, pp. 851–56.10.1016/j.scriptamat.2005.06.002 ↗
17. G. Chaha, J.E. Allison, and J.W. Jones: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 286–97.10.1007/s11661-006-9027-z ↗
18. C.D. Lee: J. Mater. Sci., 2007, vol. 42, pp. 10032–39.10.1007/s10853-007-2003-1 ↗
19. J. Song, S.M. Xiong, M. Li, and J. Allison: J. Alloys. Compd., 2009, vol. 477, pp. 863–69.10.1016/j.jallcom.2008.11.040 ↗
20. C.H. Cáceres and B.I. Selling: Mater. Sci. Eng. A, 1996, vol. 220, pp. 109–16.10.1016/S0921-5093(96)10433-0 ↗
21. C.H. Cáceres: Scripta Metall. Mater., 1995, vol. 32, pp. 1851–56.10.1016/0956-716X(95)00031-P ↗
22. B.Chen, Q. Yuan, J. Luo, and J.H. Fan: Trans. Nonferrous Met. Soc. China, 2010, vol. 20, pp. s467–70.10.1016/S1003-6326(10)60520-1 ↗
23. S.G. Lee, A.M. Gokhale, and A. Sreeranganathan: Mater. Sci. Eng. A, 2006, vol. 427, pp. 92–98.10.1016/j.msea.2006.04.095 ↗
24. G. Nicoletto, G. Anzelotti, and R. Konečná: Proc. Eng., 2010, vol. 2, pp. 547–54.10.1016/j.proeng.2010.03.059 ↗
25. N. Vanderesse, E. Maire, A. Chabod, and J.Y. Buffiére: Int. J. Fatigue, 2011, vol. 33, pp. 1514–25.10.1016/j.ijfatigue.2011.06.010 ↗
26. S.B. Biner and W.A. Spitzig: Acta Metall. Mater., 1990, vol. 4, pp. 603–10.10.1016/0956-7151(90)90214-2 ↗
27. A.K. Vasudevan and O. Richmond: Mater. Sci. Eng. A, 1989, vol. 107, pp. 63–69.10.1016/0921-5093(89)90375-4 ↗
28. A.L. Gurson: Ph.D. Thesis, Division of Engineering, Brown University, Providence, RI, 1975.
29. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99 (1), pp. 2–15.10.1115/1.3443401 ↗
30. I.E. French and P.F. Weinrich: Acta. Metall. Mater., 1973, vol. 21, pp. 1533–37.10.1016/0001-6160(73)90183-1 ↗
31. W.A. Spitzig: Acta. Metall. Mater., 1990, vol. 38, pp. 1445–53.10.1016/0956-7151(90)90113-U ↗
32. S. Biswas, F. Sket, M. Chiumenti, I. Gutiérrez-Urrutia, J.M. Molina-Aldareguía, and M.T. Pérez-Prado: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4391–403.10.1007/s11661-013-1783-y ↗
33. L.A. Feldkamp, L.C. Davis, and J.W. Kress: J. Opt. Soc. Am. A, 1984, vol. 1, pp. 612–19.10.1364/JOSAA.1.000612 ↗
34. W. Niblack: An Introduction to Digital Image Processing, Prentice Hall, Upper Saddle River, NJ, 1986, pp. 115–16.
35. E.J. Garboczi: Cement Concrete Res., 2002, vol. 32, pp. 1621–38.10.1016/S0008-8846(02)00836-0 ↗
36. A. Isaac, F. Sket, W. Reimers, B. Camin, G. Santhoff, and A.R. Pyzalla: Mater. Sci. Eng. A, 2008, vol. 478, pp. 108–18.10.1016/j.msea.2007.05.108 ↗
37. http://www-sop.inria.fr/asclepios/software/MedINRIA/, accessed April 2015.
38. K. Dzieciol, A. Borbèly, F. Sket, A. Isaac, M. Di Michiel, P. Cloetens, Th. Buslaps, and A.R. Pyzalla: Acta Mater., 2011, vol. 59, pp. 671–77.10.1016/j.actamat.2010.10.003 ↗
39. K. Dzieciol, A. Isaac, F. Sket, A. Borbèly, and A.R. Pyzalla: Proc. EPD Congr., Characterization of Minerals, Metals and Materials, San Francisco, CA, 2009, pp. 15–19.
40. http://www.volumegraphics.com/products/vgstudio-max/basic-functionality/, accessed April 2015.
41. S. Youssef, E. Maire, and R. Gaertner: Acta Mater., 2005, vol. 53, pp. 719–30.10.1016/j.actamat.2004.10.024 ↗
42. http://www.altairhyperworks.com/Product,7,HyperMesh.aspx, accessed April 2015.
43. Abaqus/Standard, Dassault Systèmes, 2011, http://www.simulia.com, accessed April 2015.
44. http://www.matweb.com/search/DataSheet.aspx?MatGUID=6a9fb156317c4ca8ab00bf8443eb13b3, accessed April 2015.
45. C.D. Lee: Mater. Sci. Eng. A, 2007, vols. 454-455, pp. 575–80.10.1016/j.msea.2006.11.064 ↗
46. C. Bettles and M.R. Barnett: Advances in wrought magnesium alloys, Woodhead Publishing, Oxford, 2012.10.1533/9780857093844 ↗
47. M.R. Barnett: Metall. Mater. Trans., 2003, vol. 34A, pp. 1799–806.10.1007/s11661-003-0146-5 ↗
48. R.W. Rice: J. Mater. Sci., 1997, vol. 32, pp. 4731–36.10.1023/A:1018674713006 ↗
49. V. Tvergaard: J. Mech. Phys. Solids., 1996, vol. 8, pp. 1237–53.10.1016/0022-5096(96)00032-4 ↗
50. V. Tvergaard and C. Niordson: Int. J. Plast., 2004, vol. 20, pp. 107–20.10.1016/S0749-6419(03)00036-6 ↗
51. J.W. Hutchinson: Int. J. Solids. Struct., 2000, vol. 37, pp. 225–38.10.1016/S0020-7683(99)00090-6 ↗