journal article·2022-04

Effect of Mo and V Addition on Microstructure and Mechanical Properties of SA508 Gr.1A Steel for Pipeline in Nuclear Power Plants

Seokmin Hong, Se-Mi Hyun, Jong-Min Kim, Yo-Seob Lee, Min-Chul Kim

Publisher page

Abstract

To improve the strength and toughness of SA508 Gr.1A steels for application to leak-before-break (LBB) designs of pipelines in nuclear power plants, the effects of adding alloying elements (Mo and V) on the microstructural formation and mechanical properties were analyzed via tensile, Charpy impact, and J–R tests considering ASME code compositions. Four SA508 Gr.1A model alloys with different C, Mo, and V contents were fabricated and their mechanical properties were evaluated. When Mo and V were added to a reference model alloy with a chemical composition identical to that of commercial SA508 Gr.1A steel, the tensile strength increased considerably. The addition of Mo and V suppressed the formation of ferrite and pearlite but promoted the formation of bainite. Nano-sized VC carbides were found to have precipitated inside the grains upon the addition of V. When the C content was decreased by 0.05 wt pct in the steel specimens after the addition of Mo and V, all of the mechanical properties showed remarkable improvements without a loss of strength. Specifically, YS, USE, and JIc increased to more than 100 MPa, 50 J, and 400 kJ/m2 at 559 K (286 °C), respectively, compared to a reference model alloy. Reducing the C content only caused a decrease in cementite, which deteriorated the toughness but did not affect the formation of bainite or the VC precipitates acting as a major strengthening mechanism. The positive effect of the addition Mo and V increased as more Mo and V were added within the range of the ASME Code composition. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. OECD/NEA, Small Modular Reactors: Challenges and Opportunities, Nuclear Technology Development, OECD Publishing, Paris, 2021. https://doi.org/10.1787/18fbb76c-en.10.1787/18fbb76c-en ↗
2. ASME: Boiler and Pressure Vessel Code Section II, Materials, ASME, 2017.
3. U.S.NRC: NUREG-1061 vol. 3, USNRC Report, 1984.
4. U.S.NRC: NUREG-800, Standard Review Plan. 3.6.3, USNRC Report, 1987.
5. W. Yu: KAERI/CM-786/2004, KAERI Report, 2004.
6. P. Dillström and W. Zang: ProLBB—A Probabilistic Approach to Leak Before Break Demonstration, SKI Report, November 2007.10.1115/PVP2008-61207 ↗
7. S. Hong, J. Kim, M.W. Kim, H.D. Kim, B.S. Lee, and M.C. Kim: Int. J. Press. Vessel. Pip., 2020, vol. 188, pp. 104226–31. https://doi.org/10.1016/j.ijpvp.2020.104226.10.1016/j.ijpvp.2020.104226 ↗
8. M.-W. Kim, Y.-S. Lee, I.-W. Shin, J.-S. Yang, and H.-D. Kim: Trans. Korean Soc. Press. Ves. Pip., 2020, vol. 16, pp. 42–8. https://doi.org/10.20466/KPVP.2020.16.1.042.10.20466/KPVP.2020.16.1.042 ↗
9. S. Nafisi, B.S. Amirkhiz, F. Fazeli, M. Arafin, R. Glodowski, L. Collins, B.S. Amirkhiz, R. Glodowski, L. Collins, and J. Szpunar: ISIJ Int., 2016, vol. 56, pp. 154–60. https://doi.org/10.2355/isijinternational.ISIJINT-2015-290.10.2355/isijinternational.ISIJINT-2015-290 ↗
10. S. Han, S. Shin, C.-H. Seo, H. Lee, J. Bae, K. Kim, S. Lee, and N. Kim: Metall. Mater. Trans. A., 2009, vol. 40A, pp. 1851–62. https://doi.org/10.1007/s11661-009-9884-3.10.1007/s11661-009-9884-3 ↗
11. Y.M. Kim, S.Y. Shin, H. Lee, B. Hwang, S. Lee, and N.J. Kim: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 1731–42. https://doi.org/10.1007/s11661-007-9197-3.10.1007/s11661-007-9197-3 ↗
12. K. Junhua, Z. Lin, G. Bin, L. Pinghe, W. Aihua, and X. Changsheng: Mater. Des., 2004, vol. 25, pp. 723–28. https://doi.org/10.1016/j.matdes.2004.03.009.10.1016/j.matdes.2004.03.009 ↗
13. S. Nafisi, M. Arafin, B.S. Amirkhiz, R. Glodowski, L. Collins, and J. Szpunar, in: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015., 2015, pp.715–20. https://doi.org/10.1007/978-3-319-48767-0_8810.1007/978-3-319-48767-0_88 ↗
14. J.-H. Yoon, B.-S. Lee, and J.-H. Hong: Met. Mater. Int., 2001, vol. 7, pp. 505–12. https://doi.org/10.1007/BF03027094.10.1007/BF03027094 ↗
15. J.H. Kim, Y.J. Oh, I.S. Hwang, D.J. Kim, and J.T. Kim: J. Nucl. Mater., 2001, vol. 299, pp. 132–39. https://doi.org/10.1016/S0022-3115(01)00688-2.10.1016/S0022-3115(01)00688-2 ↗
16. R.J. Klassen, M.N. Bassim, M.R. Bayoumi, and H.G.F. Wilsdorf: Mater. Sci. Eng., 1986, vol. 80, pp. 25–35. https://doi.org/10.1016/0025-5416(86)90299-5.10.1016/0025-5416(86)90299-5 ↗
17. B.S. Lee, Y.J. Oh, J.H. Yoon, I.H. Kuk, and J.H. Hong: Nucl. Eng. Des., 2000, vol. 199, pp. 113–23. https://doi.org/10.1016/S0029-5493(99)00061-8.10.1016/S0029-5493(99)00061-8 ↗
18. J.H. Yoon, B.S. Lee, Y.J. Oh, and J.H. Hong: Int. J. Press. Vessel. Pip., 1999, vol. 76, pp. 663–70. https://doi.org/10.1016/S0308-0161(99)00033-2.10.1016/S0308-0161(99)00033-2 ↗
19. S.-M. Hyun, S. Hong, M.-C. Kim, J. Kim, S.S. Sohn, and S.-I. Hong: Mater. Sci. Eng. A., 2021, vol. 811, pp. 141069–79. https://doi.org/10.1016/j.msea.2021.141069.10.1016/j.msea.2021.141069 ↗
20. ASTM Standard A508/A508M-16, Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forging for Pressure Vessels, ASTM, West Conshohocken, PA, 2016.
21. S. Hong, K.-D. Min, S.-M. Hyun, J. Kim, Y.-S. Lee, H.-D. Kim, and M.-C. Kim: Int. J. Press. Vessel. Pip., 2021, vol. 191, pp. 104359–68. https://doi.org/10.1016/j.ijpvp.2021.104359.10.1016/j.ijpvp.2021.104359 ↗
22. ASTM Standard E8/E8M-16, Standard Test Methods for Tension Testing of Metallic Materials, ASTM, West Conshohocken, PA, 2016.
23. ASTM Standard E23-18, Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, ASTM, West Conshohocken, PA, 2018.
24. W. Oldfield: Curve fitting impact test data: a statistical procedure, 1975. https://www.osti.gov/biblio/6253423.
25. ASTM Standard E1820-16, Standard Test Method for Measurement of Fracture Toughness, Annual Book of ASTM Standards, ASTM, West Conshohocken, PA, 2016.
26. T. Araki, I. Kozasu, H. Tankechi, K. Shibata, M. Enomoto, and H. Tamehiro: Atlas for bainitic microstructures, ISIJ, Tokyo, Japan. 1, 1992.
27. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
28. H. Bhadeshia: Bainite in Steels: Theory and Practice, 3rd ed. CRC Press, New York, 2018.
29. H. Lee, Microstructure Characterization and Effect of second phase on Mechanical Properties of HSLA Steels, Doctoral dissertation, Postech, 2008.
30. S.C. Wang and P.W. Kao: J. Mater. Sci., 1993, vol. 28, pp. 5169–75. https://doi.org/10.1007/BF00570058.10.1007/BF00570058 ↗
31. E.C. Bain and H.W. Paxton: Alloying Elements in Steel, 2nd ed., American Society for Metals, 1966.
32. W.B. Lee, S.G. Hong, C.G. Park, K.H. Kim, and S.H. Park: Scr. Mater., 2000, vol. 43, pp. 319–24. https://doi.org/10.1016/S1359-6462(00)00411-5.10.1016/S1359-6462(00)00411-5 ↗
33. T.N. Baker: Mater. Sci. Technol., 2009, vol. 25, pp. 1083–107. https://doi.org/10.1179/174328409X453253.10.1179/174328409X453253 ↗
34. A.D. Batte and R.W.K. Honeycombe: Met. Sci. J., 1973, vol. 7, pp. 160–8. https://doi.org/10.1179/030634573790445370.10.1179/030634573790445370 ↗
35. T. Siwecki, J. Eliasson, R. Lagneborg, and B. Hutchinson: ISIJ Int., 2010, vol. 50, pp. 760–7. https://doi.org/10.2355/isijinternational.50.760.10.2355/isijinternational.50.760 ↗
36. S. Nafisi, M. Arafin, R. Glodowski, L. Collins, and J. Szpunar: ISIJ Int., 2014, vol. 54, pp. 2404–10. https://doi.org/10.2355/isijinternational.54.2404.10.2355/isijinternational.54.2404 ↗
37. W. Chen, P. Gao, S. Wang, X. Zhao, and Z. Zhao: Mater. Sci. Eng. A., 2020, vol. 797, p. 140115. https://doi.org/10.1016/j.msea.2020.140115.10.1016/j.msea.2020.140115 ↗
38. J. Samei, L. Zhou, J. Kang, and D.S. Wilkinson: Int. J. Plast., 2019, vol. 117, pp. 58–70. https://doi.org/10.1016/j.ijplas.2017.12.009.10.1016/j.ijplas.2017.12.009 ↗
39. X. Pan and M. Umemoto: Acta Metall. Sin.-ENGL, 2018, vol. 31, pp. 1191-1206. https://doi.org/10.1007/s40195-018-0775-8.10.1007/s40195-018-0775-8 ↗
40. Y.Q. Wang, S.J. Clark, V. Janik, R.K. Heenan, D. Alba Venero, K. Yan, D.G. McCartney, S. Sridhar, and P.D. Lee: Acta. Mater., 2018, vol. 145, pp. 84–96. https://doi.org/10.1016/j.actamat.2017.11.032.10.1016/j.actamat.2017.11.032 ↗
41. R. Lagneborg, T. Siwecki, S. Zajac, and B. Hutchinson: Scand. J. Metall., 1999, vol. 28(5), pp. 186–241.
42. G. Miyamoto, R. Hori, B. Poorganji, and T. Furuhara: ISIJ Int., 2011, vol. 51, pp. 1733–9. https://doi.org/10.1007/s40198-018-0775-8.10.1007/s40198-018-0775-8 ↗
43. S. Dépinoy, C. Toffolon-Masclet, S. Urvoy, J. Roubaud, B. Marini, F. Roch, E. Kozeschnik, and A.-F. Gourgues-Lorenzon: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 2164–78. https://doi.org/10.1007/s11661-017-4045-6.10.1007/s11661-017-4045-6 ↗
44. S. Lee, S. Kim, B. Hwang, B.S. Lee, and C.G. Lee: Acta Mater., 2002, vol. 50, pp. 4755–62. https://doi.org/10.1016/S1359-6454(02)00313-0.10.1016/S1359-6454(02)00313-0 ↗
45. S. Yamasaki and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2003, vol. 19, pp. 723–31. https://doi.org/10.1179/026708303225002929.10.1179/026708303225002929 ↗