journal article·2021-08Open access

Effect of Cold Working and Long-Term Heating in Air on the Stress Corrosion Cracking Growth Rate in Commercial TT Alloy 690 Exposed to Simulated PWR Primary Water

Toshio Yonezawa, Atsushi Hashimoto

Abstract

Abstract The authors have previously reported that the number of cavities at or near grain boundary (GB) carbides in commercial thermally treated (TT) Alloy 690 increases with increasing cold work reduction ratio and with heating temperature in air. In the present work after very long-term heating in air, the number of cavities at or near GB carbides in cold worked commercial TT Alloy 690 was observed to saturate, and the shape and size of the cavities changed. The shape and size of cavities and cracks were categorized, and a GB defect index number was defined as a function of their number, shape and size. Stress corrosion cracking growth rates in a commercial TT Alloy 690 with various levels of cold work exposed to simulated PWR primary water at 633 K (360 °C) have been measured and correlated with the defined GB defect index number. Cavities and cracks in the same materials before and after long-term heating in air have also been correlated with the defined GB defect index number. For the heavily cold worked (≥ 15 pct) commercial TT Alloy 690, a good correlation has been observed between the PWSCCGR and the GB defect index number. By contrast, for lightly cold worked (≤ 10 pct) commercial TT Alloy 690, the SCCGR in the simulated PWR primary water was very low and the GB defect index number was usually zero, regardless of cold working reduction ratio ≤ 10 pct. It is concluded that the mechanism of SCCGR for lightly cold worked TT Alloy 690 in PWR primary water is likely to be different from that for heavily cold worked TT Alloy 690.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A.J. Sedriks, J.W. Schultz, and M.A. Cordovi: Boshoku Gijutsu, 1979, vol. 28, pp. 82–95.10.3323/jcorr1974.28.2_82 ↗
2. T. Yonezawa, K. Onimura, N. Sasaguri, T. Kusakabe, H. Nagano, K. Yamanaka, T. Minami, and M. Inoue: Proceedings of the Second International Symposium on “Environmental Degradation of Materials in Nuclear Power Systems-water Reactors (Hereinafter abbreviated as “Proceedings of the 2nd ENVDEG”) Monterey, CA, 9–12 September 1985, pp. 593–600.
3. T. Yonezawa, K. Onimura, N. Sasaguri, T. Kusakabe, H. Nagano, K. Yamanaka, T. Minami, and M. Inoue: “Effect of Heat Treatment on Corrosion Resistance of Alloy 690”, in Proceedings of the International Symposium on Contribution of Materials Investigation to the Resolution of Problems Encountered in PWR Plants, Royal Abbey of Fontevraud (Hereinafter abbreviated as “Proceedings of the FONTEVRAUD”), France, 2–6 September 1985, pp. 289–96.
4. T. Yonezawa, N. Sasaguri, and K. Onimura: Proceedings of the 1988 JAIF International Conference on Water Chemistry in Nuclear Power Plants, Tokyo, Japan, 19–22 April 1988, pp. 490–95.
5. T. Kusakabe, T. Yonezawa, and S. Tokunaga: Research on Corrosion Resistance of Steam Generator Tube, Mitsubishi Heavy Industries, Ltd., Technical Review, 1996, vol. 33(1), pp. 1–5.
6. W. Bamford, A. Jenks, R. Janowiak, and G. Stevens: Proceedings of the 19th ENVDEG (2019), pp. 256–65.
7. G.P.Airley, Metallography, 1980, 13, pp.21-41.10.1016/0026-0800(80)90020-8 ↗
8. T. Yonezawa, K. Onimura, N. Sakamoto, N. Sasaguri, H. Nakata, and H. Susukida: Proceedings of the 1st ENVDEG, Myrtle Beach, SC, 22–25 August 1983, pp. 345–66.
9. E.L.Hall, C.L.Briant, Metallugical and Materials Transactions A, 1985, 16, pp.1225-1236.10.1007/BF02670327 ↗
10. S.M.Bruemmer, L.A.Charlot, C.H.Henager,Jr., Corrosion, 1988, 44, pp.782-788.10.5006/1.3584948 ↗
11. J.S.Fish, N.Lewis, W.J.S.Yang, D.J.Perry, and C.D.Thompson: Proceedings of the 8th ENVDEG, America Island, FLA, 10–14 August 1997, pp. 266–73.
12. R.Bandy, D.V.Rooyen, Nuclear Engineering and Design, 1985, 86, pp.49-56.10.1016/0029-5493(85)90208-0 ↗
13. N.Ogawa, T.Kohno, M.Yamada, R.Umehara, Y.Arimoto, S.Okamoto, T.Tsuruta, Nuclear Engineering and Design, 1996, 165, pp.171-180.10.1016/0029-5493(96)01193-4 ↗
14. P.M. Scott and M. Le Calvar: Proceedings of the 6th ENVDEG, San Diego, CA, 1–5 August 1993, pp. 657–67.
15. P.M. Scott and P. Combrade: Proceedings of the 8th ENVDEG, America Island, FLA, 10–14 August 1997, pp. 65–73.
16. G.P. Airley: Proceedings of 1983 EPRI Workshop on Primary-Side Stress Corrosion Cracking of PWR Steam Generator Tubing; EPRI NP-5498, Project S303-5, 1983.
17. N.Totsuka, E.Lunarska, G.Cragnolino, Z.Szklarska-Smialowska, Corrosion, 1987, 43, pp.505-514.10.5006/1.3583894 ↗
18. N. Tostuka and Z. Szklarska-Smialowska: Proceedings of the 3rd ENVDEG, TMS, 1988, pp. 691–96.
19. R.B.Rebak, Szklarska-Smialowska, Corrosion Science, 1996, Vol.38, pp.971-98810.1016/0010-938X(96)00183-7 ↗
20. T. Cassagne, B. Fleury, F. Vaillant, O. de Bouvier, and P. Combrade: Proceedings of the 8th ENVDEG –ANS, 1997, pp. 307–315.
21. R.C.Newman, Corrosion, 1994, 50, pp.682-686.10.5006/1.3293544 ↗
22. R.C.Newman, C.Healey, Corrosion Science, 2007, 49, pp.4040-4050.10.1016/j.corsci.2007.05.001 ↗
23. P.M. Scott and M. Le Calvar: Proceedings of the 9th ENVDEG, TMS, 1993, pp. 657–67.
24. T.S. Gendron, P.M. Scott, S.M. Bruemmer, and L.E. Thomas: Proceedings of the Third International Steam Generator and Heat Exchanger Conference, vol. 2, CNS, 1998, pp. 5.18–35.
25. P.M. Scott: Proceedings of the 9th ENVDEG, TMS, 1999, pp. 3–14.
26. P.M. Scott and P. Combrade: J. Nucl. Mater., 2019, vol. 524, pp. 340–75.10.1016/j.jnucmat.2019.04.023 ↗
27. D.J. Paraventi and W.C. Moshier: Proceedings of the Workshop on “Effects of Cold Work on Stress Corrosion Cracking of Materials in Water Cooled Nuclear Plants, Mississauga, Toronto, Canada, 3–8 June 2007, CD-Rom.
28. K. Arioka, T. Yamada, T. Miyamoto, and T. Terachi: Proceedings of the FONTEVRAUD 7, Avignon, France, 26–30 September 2010, CD-Rom.
29. T. Yonezawa, M. Watanabe, and A. Hashimoto: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2768–80.10.1007/s11661-015-2852-1 ↗
30. K. Arioka, T. Miyamoto, T. Yamada, and T. Terachi: Proceedings of the 15th ENVDEG, Cheyenne Mountain Resort, Colorado Springs, CO, USA, 7–11 August 2011, pp. 55–69.
31. K. Arioka, T. Yamada, T. Miyamoto, and T. Terachi: Proceedings of the 17th ENVDEG, Ottawa, ON, Canada, 9–13 August 2015, CD-Rom.
32. S.M. Bruemmer, M.J. Olszta, N.R. Overman, and M.B. Toloczko: Proceedings of the 17th ENVDEG, 2015, CD-Rom.
33. Z. Zhai, M. Toloczko, K. Kruska, D. Schreiber, and S. Bruemmer: Proceedings of the 18th ENVDEG, 2017, pp. 457–83.10.1007/978-3-319-67244-1_29 ↗
34. M. Olszta, Z. Zhai, M. Toloczko, and S. Bruemmer: Proceedings of the 19th ENVDEG, 2019, pp. 274–85.
35. T. Yonezawa, M. Watanabe, and A. Hashimoto: Proceedings of the 19th ENVDEG, 2019, pp. 245–55.
36. ISO/TC 156 N 1172.