Inductively Coupled Plasma Process for Reconditioning Ti and Ni Alloy Powders for Additive Manufacturing
Source abstract
Abstract
In laser powder bed fusion additive manufacturing (AM), the number of build cycles required for a powder to go from its virgin state to a state that can alter final part mechanical properties is currently unknown. While ideal, the use of virgin powder for every AM build is not practical or economical. It is critical to investigate new methods that will help mitigate these cost drivers and enable the use of recycled powder in AM. Presented here is initial work on the use of an inductively coupled plasma (ICP) process to recondition AM powders used in laser and electron beam powder bed fusion, highlighting some challenges faced while developing optimum process parameters. The manuscript focuses on the three-dimensional characterization of used powder, before and after the plasma reconditioning process, in order to quantitatively understand the result of the ICP process on the shape and porosity of the particles. A distinct change in the morphology of the powder was observed before and after the ICP where most, but not all, irregular shaped powder particles and multi-particles were converted into more spherical particles. A detailed analysis of the percentage of spherical and non-spherical particles before and after the ICP process is also included, as well as the process’ effect on particle porosity, which was different for the two powders used, Inconel 718 and Ti-6Al-4V. The results indicate the value of using the ICP process as a viable option for recycling of these two powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. RP Guo, L Xu, BYP Zong, R Yang, Metallurgica Sinica (English Letters), 2017, vol. 30(8), pp. 735 – 744.10.1007/s40195-017-0540-4 ↗
2. C Oikonomou, E Hryha, A Ahlin, L Nyborg, European Powder Metallurgy Association, 2013, pp. 1–7.
3. A.T. Sutton, C.S. Kriewall, M.C. Leu, and J.W. Newkirk: in Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium, 2016, pp. 1:1004–1030.
4. D.J. Novotnak, and L.W. L’Herbier: European Powder Metallurgy Association, 2015, pp. 1–7.
5. R. O’Leary, R. Setchi, P. Prickett, G. Hankins, and N. Jones: KES Transactions on Sustainable Design and Manufacturing II, 2015, paper sdm15-038, pp. 377–88.
6. I. Rosenthal, E. Tiferet, M. Ganor, and A. Stern: The Annals of “Dunarea de Jos” University of Galati. Fascicle XII: Welding Equipment and Technology, 2014, vol. 25, pp. 35–40.
7. P Harlin, M Olsson, Powder Metallurgy, 2007, vol. 50(4), pp. 345–353.10.1179/174329007X178029 ↗
8. P. Carroll, A. Pinkerton, J. Allen, W. Syed, H. Sezer, P. Brown, G. Ng, and L. Li: in Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing, NATO Research and Technology Organisation, 2006.
9. M Hu, T Zhang, J Stansbury, J Neal, EJ Garboczi, J. Environ. Eng., 2013, vol. 139, pp. 923–931.10.1061/(ASCE)EE.1943-7870.0000699 ↗
10. ST Erdogan, AM Forster, PE Stutzman, EJ Garboczi, Cem. Conc. Comp., 2017, vol. 83, pp. 36-44.10.1016/j.cemconcomp.2017.07.003 ↗
11. EJ Garboczi EJ, Powder Technology, 2011, vol. 207, pp. 96-103.10.1016/j.powtec.2010.10.014 ↗
12. R Pashminehazar, A Kharaghani, E Tsotsas, Powder Technology, 2016, vol. 300, pp. 46-60.10.1016/j.powtec.2016.03.053 ↗
13. AS Chawanji, AJ Baldwin, G Brisson, E Webster, J. Microscopy, 2012, vol. 248, pp. 49–57. https://doi.org/10.1111/j.1365-2818.2012.03649.x.10.1111/j.1365-2818.2012.03649.x ↗
14. C Redenbach, R Ohser-Wiedemann, R Löffler, T Bernthaler, A Nagel, Part. Part. Syst. Charact., 2011, vol. 28, pp. 3–12. https://doi.org/10.1002/ppsc.200900088.10.1002/ppsc.200900088 ↗
15. G Chen, Q Zhou, SY Zhao, JO Yin, P Tan, ZF Li, Y Ge, J Wang, HP Tang, Powder Technology, 2018, vol. 330, pp. 425-530.10.1016/j.powtec.2018.02.053 ↗
16. G Chen, SY Zhao, P Tan, J Wang, CS Xiang, HP Tang, Powder Technology, 2018, vol. 333, pp. 38-46.10.1016/j.powtec.2018.04.013 ↗
17. A du Plessis, P Sperling, A Beerlink, WB du Preez, SG le Roux, MethodsX, 2018, vol. 5, pp. 1336-1345.10.1016/j.mex.2018.10.021 ↗
18. K Heim, F Bernier, R Pelletier, L-P Lefebvre, Case Studies in Nondestructive Testing and Evaluation, 2016, vol. 6, pp. 45-52.10.1016/j.csndt.2016.09.002 ↗
19. S Cottrino, Y Jorand, E Maire, J Adrien, Materials Characterization, 2013, vol. 81, pp. 111-123.10.1016/j.matchar.2013.04.004 ↗
20. F. Bernier, R. Tahara, and M. Gendron: Metal Powder Report, 2018, vol. 73, May/June.10.1016/j.mprp.2018.01.002 ↗
21. C. Sungail, and A. Abid: Metal Powder Report, 2018, vol. 73, November/December.10.1016/j.mprp.2018.03.046 ↗
22. EJ Garboczi, Cem. Conc. Res., 2002, vol. 32(10), pp. 1621 – 1638.10.1016/S0008-8846(02)00836-0 ↗
23. JA Slotwinski, EJ Garboczi, PE Stutzman, CF Ferraris, S Watson, MA Peltz, J. Res. NIST, 2014, vol. 119, pp. 460-493.10.6028/jres.119.018 ↗
24. EJ Garboczi, JW Bullard, Adv. Pow. Tech., 2017, vol. 28, pp.325 – 339.10.1016/j.apt.2016.10.014 ↗
25. M Renderos, F Girot, A Lamikiz, A Torregaray, N Saintier, Physics Procedia, 2016, vol. 83, pp. 769 – 777. https://doi.org/10.1016/j.phpro.2016.08.079.10.1016/j.phpro.2016.08.079 ↗
26. QB Nguyen, M Ling, S Nai, Z Zhu, C-N Sun, J Wei, W Zhou, Engineering, 2017, vol. 3, pp. 695–700.10.1016/J.ENG.2017.05.012 ↗
27. M Renderos, A Torregaray, ME Gutierrez-Orrantia, A Lamikiz, N Saintier, F Girot, Materials Characterization, 2017, vol. 134, pp. 103-113.10.1016/j.matchar.2017.09.029 ↗
28. G. Egger, P.E. Gygax, R. Glardon, and N.P. Karapatis: in: Solid Freeform Fab. Proc., August 1999, pp. 255–63.
29. HP Tang, M Qian, N Liu, XZ Zhang, GY Yang, J Wang, JOM, 2015, vol. 67(3), pp. 555–563.10.1007/s11837-015-1300-4 ↗
30. MI Boulos, Plasma Chemistry and Plasma Processing, 2016, vol. 36(1), pp. 3–28.10.1007/s11090-015-9660-7 ↗
31. X Fan, F Gitzhofer, M Boulos, Journal of Thermal Spray Technology, 1998, vol. 7(2), pp. 247–253.10.1361/105996398770350990 ↗
32. C. Yu, X. Zhou, D. Wang, N.V. Linh, and W. Liu, Plasma Sci. Technol., 2018, vol. 20(1), pp. 014019.10.1088/2058-6272/aa8e94 ↗
33. W Yuming, H Junjie, S Yanwei, Rare Metal Mater. and Engin., 2013, vol. 42(9), pp. 1810 – 1813.10.1016/S1875-5372(14)60010-2 ↗
34. N Otsu, IEEE Transactions on Systems, Man, and Cybernetics, 1979, vol. 9(1), pp. 62–66.10.1109/TSMC.1979.4310076 ↗
35. N Hrabe, EJ Garboczi, Additive Manufacturing, 2020, vol. 31, pp. 100965.
36. EJ Garboczi, N Hrabe, J. Vis. Exp., 2020, vol. 166, pp. e61636. https://doi.org/10.3791/61636.10.3791/61636 ↗
37. M Taylor, EJ Garboczi, ST Erdogan, DW Fowler, Powder Technology, 2006, vol. 162(1), pp. 1 – 15.10.1016/j.powtec.2005.10.013 ↗
38. L. Ardila, F. Garciandia, J. Gonzlez-Daz, P. lvarez, A. Echeverria, M. Petite, R. Deffley, J. Ochoa: Phys. Proc., 2014, vol. 56, pp. 99–107.10.1016/j.phpro.2014.08.152 ↗
39. JM Fernlund, Engineering Geology, 1998, vol. 50(1), pp. 111 – 124.10.1016/S0013-7952(98)00004-0 ↗
40. EJ Garboczi, K Riding, M Mirzahosseini, Advanced Powder Technology, 2017, vol. 28(2), pp. 648 – 657.10.1016/j.apt.2016.12.002 ↗