journal article·2020-10

In Situ Analysis of Multiphase Compounds at the Liquid Al-Solid Cu Interface: Formation Sequence, Growth Kinetics and Critical Thickness

Zongye Ding, Qiaodan Hu, Sheng Cao, Tianxing Yang, Fan Yang, Liao Yu, Wenquan Lu, Naifang Zhang, Jianguo Li

Publisher page

Abstract

The dissolution of substrate and growth behavior of diversified IMCs at the liquid Al/solid Cu interface were in-situ observed through synchrotron radiography. The formation and growth characteristics of diversified layers at the interface were investigated, and the difference between the critical thicknesses of growing layers before new IMCs formation was determined. The primary IMCs formation during holding or solidification was achieved by controlling the Al amount and holding time. Three IMCs, e2, γ1 and β, formed sequentially at the interface during reactive diffusion, following by η2 and θ IMCs during solidification. The primary phase and IMCs formation sequence during diffusion reaction were effectively predicted from the driving force and consistent with the in-situ observation. The growth of e2 layer at the early stage and γ1 layer were dominated by chemical reaction, while the limited atoms diffusion based on a multiphase growth model resulted in the e2 and β growth deviating from a linear relationship. In addition, a larger concentration range of the lately formed phase and a smaller concentration range of the growing phase preferred an increasing critical thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Surface and Thin Film Phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. T.M. Wang, F. Cao, P. Zhou, H.J. Kang, Z.N. Chen, Y.N. Fu, T.Q. Xiao, W.X. Huang, and Q.X. Yuan: J. Alloy. Compd., 2014, vol. 616, pp. 550-555.10.1016/j.jallcom.2014.07.172 ↗
2. J.F. Zhao, C. Unuvar, U.A. Tamburini, and Z.A. Munir: Acta Mater., 2008, vol. 56, pp. 1840-1848.10.1016/j.actamat.2007.12.024 ↗
3. Z.W. Niu, Z. Ye, J.H. Huang, H. Yang, J. Yang, and S.H. Chen: Mater. Charact., 2018, vol. 138, pp. 78-88.10.1016/j.matchar.2018.01.054 ↗
4. R. Beygi, M.Z. Mehrizi, D. Verdera, and A. Loureiro: J. Mater. Process. Tech., 2018, vol. 255, pp. 739-748.10.1016/j.jmatprotec.2018.01.033 ↗
5. S. Tavassoli, M. Abbasi, and R. Tahavvori: Mater. Design, 2016, vol. 108, pp. 343-353.10.1016/j.matdes.2016.06.076 ↗
6. G.P. Liu, Q.D. Wang, L. Zhang, B. Ye, H.Y. Jiang, and W.J. Ding: Metall. Mater. Trans. A, 2019, vol. 50, pp. 401-414.10.1007/s11661-018-4981-9 ↗
7. X.G. Wang, X.G. Li, and C.G. Wang: J. Manuf. Process., 2018, vol. 35, pp. 343-350.10.1016/j.jmapro.2018.08.020 ↗
8. Y.N. Wei, F. Sun, S.Y. Tan, and S.H. Liang: Vacuum, 2018, vol. 154, pp. 18-24.10.1016/j.vacuum.2018.04.036 ↗
9. D.G. Li, Q. Wang, T. Liu, G.J. Li, and J.C. He: Mater. Chem. Phys., 2009, vol. 117, pp. 504-510.10.1016/j.matchemphys.2009.06.041 ↗
10. X. Li, Z.Y. Lu, Y. Fautrelle, B. Saadi, Z.M. Ren, and F. Debray: Mater. Lett., 2013, vol. 96, pp. 104-108.10.1016/j.matlet.2013.01.009 ↗
11. B. Xu, W.P. Tong, C.Z. Liu, H. Zhang, L. Zuo, and J.C. He: J. Mater. Sci. Technol., 2011, vol. 27, pp. 856-860.10.1016/S1005-0302(11)60155-2 ↗
12. Y. Tanaka, M. Kajihara, and Y. Watanabe: Mater. Sci. Eng. A, 2007, vol. 445-446, pp. 355-363.10.1016/j.msea.2006.09.047 ↗
13. Y.J. Su, X.H. Liu, H.Y. Huang, X.F. Liu, and J.X. Xie: Metall. Mater. Trans. A, 2011, vol.42, pp. 4088-4099.10.1007/s11661-011-0785-x ↗
14. G.R. Zare, M. Divandari, and H. Arabi: Mater. Sci. Technol., 2013, vol. 29, pp. 190-196.10.1179/1743284712Y.0000000096 ↗
15. H.G. Huang, Y.K. Dong, M. Yan, and F.S. Du: Trans. Nonferrous Met. Soc. China, 2017, vol. 27, pp. 1019-1025.10.1016/S1003-6326(17)60119-5 ↗
16. G.P. Liu, Q.D. Wang, L. Zhang, B. Ye, H.Y. Jiang, and W.J. Ding: Metall. Mater. Trans. A, 2018, vol. 49, pp. 661-672.10.1007/s11661-017-4427-9 ↗
17. H.Y. Li, W.G. Chen, L.L. Dong, Y.G. Shi, J. Liu, and Y.Q. Fu: J. Mater. Process. Tech., 2018, vol. 252, pp. 795-803.10.1016/j.jmatprotec.2017.10.050 ↗
18. Y. Fu, Y.B. Zhang, J.C. Jie, K. Svynarenko, C.H. Liang, and T.J. Li: China Foundry, 2017, vol. 14, pp. 194-198.10.1007/s41230-017-6057-7 ↗
19. O.Y. Liashenko, S. Lay, and F. Hodaj: Acta Mater., 2016, vol. 117, pp. 216-227.10.1016/j.actamat.2016.07.021 ↗
20. R. Pretorius, T.K. Marais, and C.C. Theron: Mater. Sci. Eng. R, 1993, vol. 10, pp. 1-83.
21. W.K. Choi, and H.M. Lee: Scripta Mater., 2002, vol. 46, pp. 777-781.10.1016/S1359-6462(02)00074-X ↗
22. B.J. Lee, N.M. Hwang, and H.M. Lee: Acta Mater., 1997, vol. 45, pp. 1867-1874.10.1016/S1359-6454(96)00325-4 ↗
23. Z.Y. Ding, Q.D. Hu, W.Q. Lu, X. Ge, S. Cao, S.Y. Sun, T.X. Yang, M.X. Xia, and J.G. Li: Mater. Charact., 2018, vol. 136, pp. 157-164.10.1016/j.matchar.2017.12.024 ↗
24. Y.J. Guo, G.W. Liu, H.Y. Jin, Z.Q. Shi, and G.J. Qiao: J. Mater. Sci., 2011, vol. 46, pp. 2467-2473.10.1007/s10853-010-5093-0 ↗
25. P. Vajeeston, P. Ravindran, C. Ravi, and R. Asokamani: Phys. Rev. B, 2015, vol. 63, p. 045115.10.1103/PhysRevB.63.045115 ↗
26. S.M. Liang, and R. Schmid-Fetzer: Calphad, 2015, vol. 51, pp. 252-260.10.1016/j.calphad.2015.10.004 ↗
27. Z.Y. Ding, Q.D. Hu, W.Q. Lu, X.W. Xu, X. Ge, S. Cao, T.X. Yang, H.H. Ge, M.X. Xia, and J.G. Li: Metall. Mater. Trans. A, 2019, vol. 50, pp. 300-310.10.1007/s11661-018-4965-9 ↗
28. Z.Y. Ding, Q.D. Hu, W.Q. Lu, S.Y. Sun, M.X. Xia, and J.G. Li: Scripta Mater., 2017, vol. 130, pp. 214-218.10.1016/j.scriptamat.2016.12.010 ↗
29. V.I. Dybkov: J. Mater. Sci., 1986, vol. 21, pp. 3078-3084.10.1007/BF00553339 ↗
30. V.I. Dybkov: J. Mater. Sci., 1986, vol. 21, pp. 3085-3090.10.1007/BF00553340 ↗
31. V.I. Dybkov: J. Mater. Sci., 1987, vol. 22, pp. 4233-4239.10.1007/BF01132013 ↗
32. U. Gösele, and K.N. Tu: J. Appl. Phys., 1982, vol. 53, p. 3252.10.1063/1.331028 ↗