journal article·2020-04Open access

The Effect of Variant Selection on Texture of TWIP/TRIP Steels During Uniaxial Tensile Loading

Marton Benke, Adrienn Hlavacs, Erzsebet Nagy, Gabor Karacs, Valeria Mertinger

Abstract

Abstract The aim of the present manuscript is to reveal the role of variant selection associated with the γ → εand γ → ε → α′ transformations in the resulting texture of γ, ε and α′ phases of FeMnCr steels during uniaxial loading. Tensile tests were carried out at temperatures well above and close to the martensite start temperature of the ε phase ($$ M_{\text{s}}\varepsilon $$). Pole figures were obtained from the cross-section of the fractured specimens by X-ray diffraction (XRD). The γ 〈111〉 texture developed regardless of test temperature. It was found that the ratio of diffracted intensity in the 0 and ~ 70 deg directions with respect to tensile axis notably changed with test temperature. The difference was caused by variant selection accompanying the γ → α′ transformation. At high temperatures, α′ martensite formed only in the ~ 70 deg directions, where the mechanical driving force is large. At lower temperatures, however, α′ martensite formed in the ~ 70 and 0 deg directions as well. It is also shown that stress/strain-induced ε martensite can only form in the ~ 70 deg directions. The results apply for all three examined steels.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. H. Miyaji, E. Furubayashi: Texture Microstruct., 1991, vol. 14-18, pp. 561-566.10.1155/TSM.14-18.561 ↗
2. J. Savoie, R.K. Ray, M.P. Butron-Guillen, J.J. Jonas: Acta Metall. Mater., 1994, vol. 42, pp. 2511-2523.10.1016/0956-7151(94)90332-8 ↗
3. R.K. Ray, J.J. Jonas, M.P. Butron-Guillen, J. Savoie: ISIJ Int., 1994, vol. 34, pp. 927-942.10.2355/isijinternational.34.927 ↗
4. N. Gey, B. Petit, M. Humbert: Metall. Mater.Trans. A, 2005, vol. 36, pp. 3291-3299.10.1007/s11661-005-0003-9 ↗
5. J.R. Patel, M. Cohen: Acta Metall., 1953, vol. 1, pp. 531-538.10.1016/0001-6160(53)90083-2 ↗
6. S. Kundu, H.K.D.H. Bhadeshia: Scripta Mater., 2006, vol. 55, pp. 779–781.10.1016/j.scriptamat.2006.07.021 ↗
7. H.K.D.H. Bhadeshia, R. W. K. Honeycombe, Steels Microstructure and Properties, 3rd ed., Elsevier, Amsterdam, 2006, pp. 111-112.
8. T. Tomida, M. Wakita: ISIJ Int., 2012, vol. 52, pp. 601–609.10.2355/isijinternational.52.601 ↗
9. A. Matsumoto, M. Chen, A. Shibata, T. Miyazawa, M. Sato, N. Tsuji: Materials Today: Proc., 2015, vol. 2S, pp. S945 – S948.10.1016/j.matpr.2015.07.438 ↗
10. F. Lu, P. Yang, L. Meng, F. Cui, H. Ding: J. Mater. Sci. Technol., 2011, vol. 27, pp. 257-265.10.1016/S1005-0302(11)60059-5 ↗
11. D. Barbier, N. Gey, S. Allain, N. Bozzlo, M. Humbert: Mat. Sci. Eng. A, 2009, vol. 500, pp. 196-206.10.1016/j.msea.2008.09.031 ↗
12. X. Fang, P. Yang, F. Lu, L. Meng: J. Iron Steel Res. Int., 2011, vol. 18, pp. 46-52.10.1016/S1006-706X(11)60116-7 ↗
13. S. Vercammen, B. Blanpain, B.C. De Cooman, P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005-2012.10.1016/j.actamat.2003.12.040 ↗
14. L. Bracke, K. Verbeken, L. Kestens, J. Penning: Acta Mater., 2009, vol. 57, pp. 1512-1524 .10.1016/j.actamat.2008.11.036 ↗
15. Y. Lü, B. Hutchinson, D.A. Molodov, G. Gottstein: Acta Mater., 2010, vol. 58, pp. 3079-309010.1016/j.actamat.2010.01.045 ↗
16. Y. Lü, D.A. Molodov, G. Gottstein: ISIJ Int., 2011, vol. 51, pp. 812–817.10.2355/isijinternational.51.812 ↗
17. A.A. Saleh, E.V. Pereloma, A.A. Gazder: Mat. Sci. Eng. A, 2011, vol. 528, pp. 4537–4549 .10.1016/j.msea.2011.02.055 ↗
18. M. Ashiq, P. Dhekne, A.S. Hamada, P. Sahu, B. Mahato, R.K. Minz, S.G. Chowdhury, L.P. Karjalainen: Metall. Mater. Trans. A, 2017, vol. 48 (10), pp. 4842–4856.10.1007/s11661-017-4241-4 ↗
19. O. Engler, V. Randle: Introduction to Texture Analysis, 2nd ed., CRC Press, Boca Raton, 2010, pp. 208-213.
20. S. Suwas, R.K. Ray: Crystallographic Texture of Materials, Springer, Berlin, 2014, pp. 13.10.1007/978-1-4471-6314-5 ↗
21. H.K.D.H. Bhadeshia: ISIJ Int., 2002, vol. 42, pp. 1059-1060.10.2355/isijinternational.42.1059 ↗
22. Bruker AXS GmbH: Texeval Texture Evaluation Program Version 2.4 User’s Manual, Bruker AXS GmbH, 2002, pp. 33–41.
23. M Sepsi, A. Talgotra, E. Nagy, M. Benke, V. Mertinger: Proc. MultiSci.: XXXI. microCAD Int. Multidiscip. Sci. Conf. (2017) ISBN 978-963-358-132-2.
24. V. Seetharaman: B. Mater. Sci., 1984, vol. 6, pp. 703-716.10.1007/BF02743999 ↗
25. B. Qin, H.K.D.H. Bhadeshia: Mater. Sci. Tech., 2008, vol. 24, pp. 969-973.10.1179/174328408X263688 ↗