journal article·2019-09-15

Friction Stir Processing of Beta C and Ti-185: A Unique Pathway to Engineer Microstructures for Exceptional Properties in β Titanium Alloys

Vedavyas Tungala, Aniket K. Dutt, Deep Choudhuri, Rajiv S. Mishra, Sesh A. Tamirisakandala, Kyu C. Cho, Raymond E. Brennan

Publisher page

Abstract

Metastable β titanium alloys offer a wide range of attractive property combinations. Conventional processing options have practical limitations in achieving maximum attainable properties and utilizing them to their fullest potential. In the current study, friction stir processing (FSP) of β alloys is explored as a unique path for microstructural engineering. Two metastable β titanium alloys, Ti-1Al-8V-5Fe (Ti-185) and Ti-3Al-8V-6Cr-4Mo-4Zr (Beta C), subjected to FSP with two different tool rotation rates at a constant traverse speed were analyzed in different microstructural conditions. Fully retained β grain structures with grain sizes in the range 4 to 7 µm in Ti-185 and 10 to 15 µm in Beta C were obtained in the as-FSP condition. Post-FSP duplex aging treatment of the low heat input condition resulted in better tensile properties compared to those of high heat input condition, attributable to high number density of nucleation sites generated during FSP. Transmission electron microscopy observations of high-strength Ti-185 sample revealed fine α platelets of length in the range 50 to 130 nm and an aspect ratio in the range 3 to 10, providing significant strengthening contribution. Approximate nose temperatures and nose time calculations of the continuous cooling transformation of β to α were made for various commercial Ti alloys to assess the potential of achieving ultra-high strength levels via FSP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. I. Inagaki, T. Takechi, Y. Shirai, and N. Ariyasu: Nippon Steel & Sumitomo Metal Technical Report, 2014, vol. 106, pp. 22.
2. R. R. Boyer: JOM, 2010, vol. 62, pp. 21-24.10.1007/s11837-010-0071-1 ↗
3. C. Rhodes, M. Mahoney, W. Bingel, R. Spurling, and C. Bampton: Scr. Mater., 1997, vol. 36, pp. 69-75.10.1016/S1359-6462(96)00344-2 ↗
4. G. Liu, L. Murr, C. Niou, J. McClure, and F. Vega: Scr. Mater., 1997, vol. 37, pp. 355-361.10.1016/S1359-6462(97)00093-6 ↗
5. Y. S. Sato, H. Kokawa, M. Enomoto, and S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2429-2437.10.1007/s11661-999-0251-1 ↗
6. Y. S. Sato, H. Takauchi, S. H. C. Park, and H. Kokawa: Mater. Sci. Eng., A, 2005, vol. 405, pp. 333-38.10.1016/j.msea.2005.06.008 ↗
7. M. A. Sutton, B. Yang, A. P. Reynolds, and R. Taylor: Mater. Sci. Eng., A, 2002, vol. 323, pp. 160-166.10.1016/S0921-5093(01)01358-2 ↗
8. M. Peel, A. Steuwer, M. Preuss, and P. Withers: Acta Mater., 2003, vol. 51, pp. 4791-4801.10.1016/S1359-6454(03)00319-7 ↗
9. Y. Sato, S. Park, A. Matsunaga, A. Honda, and H. Kokawa: J. Mater. Sci., 2005, vol. 40, pp. 637-642.10.1007/s10853-005-6301-1 ↗
10. S. H. C. Park, Y. S. Sato, and H. Kokawa: Scr. Mater., 2003, vol. 49, pp. 161-166.10.1016/S1359-6462(03)00210-0 ↗
11. C. Meran: Mater Des, 2006, vol. 27, pp. 719-726.10.1016/j.matdes.2005.05.006 ↗
12. A. J. Ramirez and M. C. Juhas: Mat. Sci. For., 2003, vol. 426, pp. 2999-3004.
13. T. Lienert: Friction Stir Welding and Processing, ASM International, 2007, pp. 123-54.
14. A. P. Reynolds, E. Hood, and W. Tang: Scr. Mater., 2005, vol. 52, pp. 491-494.10.1016/j.scriptamat.2004.11.009 ↗
15. A. Pilchak, Z. Li, J. Fisher, A. Reynolds, M. Juhas, J. Williams, K. Jata, M. Mahoney, R. Mishra, and T. Lienert: TMS, Warrendale, PA, 2007, pp. 419-427.
16. A. Pilchak, M. Juhas, and J. Williams: Metall. Mater. Trans. A, 2007, vol. 38, pp. 435-37.10.1007/s11661-006-9059-4 ↗
17. S. Pasta and A. P. Reynolds: Fatigue & Fracture of Eng. Mater. & Struct., 2008, vol. 31, pp. 569-580.10.1111/j.1460-2695.2008.01258.x ↗
18. H. Liu, L. Zhou, and Q. Liu: Scr. Mater., 2009, vol. 61, pp. 1008-11.10.1016/j.scriptamat.2009.08.012 ↗
19. L. Zhou, H. Liu, P. Liu, and Q. Liu: Scr. Mater., 2009, vol. 61, pp. 596-599.10.1016/j.scriptamat.2009.05.029 ↗
20. H. J. Liu, L. Zhou, Y. X. Huang, and Q. W. Liu: Mat. Sci. For, 2010, vol. 638, pp. 1185-1190.
21. Y. Zhang, Y. S. Sato, H. Kokawa, S. H. C. Park, and S. Hirano: Mater. Sci. Eng., A, 2008, vol. 485, pp. 448-455.10.1016/j.msea.2007.08.051 ↗
22. Y. Zhang, Y. S. Sato, H. Kokawa, S. H. C. Park, and S. Hirano: Mater. Sci. Eng., A, 2008, vol. 488, pp. 25-30.10.1016/j.msea.2007.10.062 ↗
23. N. Kumar, J. Rodelas, and R. Mishra: TMS Warrendale, 2009, pp. 45–53.
24. P. Edwards and M. Ramulu: J Eng. Mater. Technol., 2010, vol. 132, pp. 0310061-10.10.1115/1.4001302 ↗
25. D. Sanders, P. Edwards, A. Cantrell, K. Gangwar, and M. Ramulu: JOM, 2015, vol. 67, pp. 1054-63.10.1007/s11837-015-1376-x ↗
26. S. Mironov, Y. Sato, and H. Kokawa: J. Mater. Sci. Technol., 2018, vol. 34, pp. 58-72.10.1016/j.jmst.2017.10.018 ↗
27. P. Mashinini, I. Dinaharan, J. D. R. Selvam, and D. Hattingh: Mater. Charact., 2018, vol. 139, pp. 328-336.10.1016/j.matchar.2018.03.020 ↗
28. K. Gangwar and M. Ramulu: Mater Des, 2018, vol. 141, pp. 230-255.10.1016/j.matdes.2017.12.033 ↗
29. W. Brassington and P. A. Colegrove: Sci. Technol. Weld. Join., 2017, vol. 22, pp. 300-318.10.1080/13621718.2016.1236002 ↗
30. K. Jata and A. P. Reynolds: Metallic Materials with High Structural Efficiency, Springer, Dordrecht, 2004, pp. 391-400.10.1007/1-4020-2112-7_39 ↗
31. S. Mironov, Y. Sato, and H. Kokawa: Mater. Sci. Eng., A, 2010, vol. 527, pp. 7498-7504.10.1016/j.msea.2010.08.074 ↗
32. S. Nyakana, J. Fanning, and R. Boyer: J. Mater. Eng. perform., 2005, vol. 14, pp. 799-811.10.1361/105994905X75646 ↗
33. A. Devaraj, V. V. Joshi, A. Srivastava, S. Manandhar, V. Moxson, V. A. Duz, and C. Lavender: Nat. Commun., 2016, vol. 7, pp. 111761-10.10.1038/ncomms11176 ↗
34. R. S. Mishra, and Z. Y. Ma: Mater. Sci. Eng., R, 2005, vol 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
35. J. Su, J. Wang, R. S. Mishra, R. Xu, and J. A. Baumann: Mater. Sci. Eng., A, 2013, vol. 573, pp. 67-74.10.1016/j.msea.2013.02.025 ↗
36. P. Edwards and M. Ramulu: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 468-472.10.1179/136217110X12665778348425 ↗
37. A. Rollett, F. Humphreys, G. Rohrer, and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, 2004.
38. I. Weiss and S. Semiatin: Mater. Sci. Eng., A, 1998, vol. 243, pp. 46-65.10.1016/S0921-5093(97)00783-1 ↗
39. W. Burgers: Physica, 1934, vol. 1, pp. 561-586.10.1016/S0031-8914(34)80244-3 ↗
40. E. Hall: Proc. Phys. Soc B, 1951, vol. 64, pp. 747-753.10.1088/0370-1301/64/9/303 ↗
41. N. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
42. K. Chia, K. Jung, and H. Conrad: Mater. Sci. Eng., A, 2005, vol. 409, pp. 32-38.10.1016/j.msea.2005.03.117 ↗
43. M. Hansen, E. Kamen, H. D. Kessler, and D. McPherson: JOM, 1951, vol. 3, pp. 881-88.10.1007/BF03397396 ↗
44. J. Yan: Dissertation. Northwestern University, 2014, pp. 117-26.
45. E. Collings: Metals Park Ohio, 1984, vol. 3, pp. 134-143.
46. E. Collings: Metals Park Ohio, 1984, vol. 3, pp. 94-111.
47. C. Hammond and J. Nutting: Metal Sci., 1977, vol. 11, pp. 474-490.10.1179/msc.1977.11.10.474 ↗
48. J. D. Cotton, R. D. Briggs, R. R. Boyer, S. Tamirisakandala, P. Russo, N. Shchetnikov, and J. C. Fanning: JOM, 2015, vol. 67, pp. 1281-1303.10.1007/s11837-015-1442-4 ↗
49. G. Lütjering and J. C. Williams: Titanium, 1st ed., Springer, Berlin, 2003.10.1007/978-3-540-71398-2 ↗
50. F. Prima, J. Debuigne, M. Boliveau, and D. Ansel: J. Mater. Sci. Lett., 2000, vol. 19, pp. 2219-2221.10.1023/A:1006708420478 ↗
51. C. Yolton, F. Froes, and R. Malone: Metall. Mater. Trans. A, 1979, vol. 10, pp. 132-134.10.1007/BF02686421 ↗
52. A. Pilchak, W. Tang, H. Sahiner, A. P. Reynolds, and J. Williams: Metall. Mater. Trans. A, 2011, vol. 42, pp. 745-762.10.1007/s11661-010-0439-4 ↗
53. R. S. Mishra, P. De Sarathi, and N. Kumar: Friction Stir Welding and Processing, Springer, Cham ,2014, pp. 189-235.10.1007/978-3-319-07043-8_7 ↗