Effect of Vacuum-Sintering Temperature on Magnetic and Mechanical Properties of TiC-TiN-Ni-Mo-C Cermets
Source abstract
Abstract
The effect of vacuum-sintering temperature (Tvs), ranging from 1390 °C to 1470 °C, on magnetic and mechanical properties of TiC-10TiN-30Ni-6Mo-4C (mol pct) cermet was investigated in the present article. Room-temperature (RT) magnetization and maximum susceptibility decreased with increasing Tvs up to 1450 °C, and then increased. This was mainly attributed to the fact that Ti content in the Ni-based binder phase increased with increasing Tvs up to 1450 °C, suppressing ferromagnetism of the Ni matrix. RT ferromagnetism disappeared at Tvs ≥ 1430 °C. Transverse rupture strength (TRS) reached a peak value at Tvs = 1430 °C, and hardness did not significantly vary with Tvs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. S.Y. Zhang: Mater. Sci. Eng. A, 1993, vol. 163, pp. 141–48.10.1016/0921-5093(93)90588-6 ↗
2. X.Y. Ren, Z.J. Peng, Y.B. Hu, C.B. Wang, Z.Q. Fu, W. Yue, L.H. Qi, and H.Z. Miao: Tribol. Int., 2013, vol. 66, pp. 35–43.10.1016/j.triboint.2013.04.002 ↗
3. J. Larsen-Basse: Mater. Sci. Eng. A, 1988, vol. 105, pp. 395–400.10.1016/0025-5416(88)90723-9 ↗
4. H. Kolaska: Wire, 1990, vol. 40, pp. 343–46.
5. G. Östberg, K. Buss, M. Christenesen, S. Norgren, H.-O. André, D. Mari, G. Wahnström, and I. Reineck: Int. J. Refract. Met. Hard Mater., 2006, vol. 24, pp. 135–44.10.1016/j.ijrmhm.2005.04.009 ↗
6. P. Ettmayer, H. Kolaska, W. Lengauer, and K. Dreyer: Int. J. Refract. Met. Hard Mater., 1995, vol. 13, pp. 343–51.10.1016/0263-4368(95)00027-G ↗
7. E.B. Clark and N. Roebuck: Int. J. Refract. Met. Hard Mater., 1992, vol. 11 pp. 23–33.10.1016/0263-4368(92)90081-C ↗
8. Y. Iyori and H. Yokoo: “Cermet Alloys and Composite Mechanical Parts Made by Employing Them,” U.S. Patent No. 4,983,212, Jan. 1991.
9. Q.Z. Xu, J. Zhao, X. Ai, W.Z. Qin, D.W. Wang, and W.M. Huang: J. Alloys Compd., 2015, vol. 649, pp. 885–90.10.1016/j.jallcom.2015.07.144 ↗
10. X.B. Zhang, N. Liu, and C.L. Rong: Mater. Charact., 2008, vol. 59, pp. 1690–96.10.1016/j.matchar.2008.03.008 ↗
11. J. Jung and S. Kang: Acta Mater., 2004, vol. 52, pp. 1379–86.10.1016/j.actamat.2003.11.021 ↗
12. J. Zackrisson, H.-O. Andrén, and U. Rolander: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 85–94.10.1007/s11661-001-0104-z ↗
13. Z.H. Guo, J. Xiong, M. Yang, J. Wang, L. Sun, Y.M. Wu, J.Z. Chen, and S.J. Xiong: Int. J. Refract. Met. Hard Mater., 2009, vol. 27, pp. 781–83.10.1016/j.ijrmhm.2009.01.003 ↗
14. J. Stöhr and H.C. Siegmann: Magnetism: From Fundamentals to Nanoscale Dynamics, Series in Solid-State Sciences, Springer, New York, NY, 2006, p. 483.
15. P. Elumalai, H.N. Vasan, M. Verelst, P. Lecante, V. Carles, and P. Tailhades: Mater. Res. Bull., 2002, vol. 37, pp. 353–63.10.1016/S0025-5408(01)00768-1 ↗
16. M. Leonowicz, E. Macejewska, A.D. Pomogailo, and G.I. Dzhardimalieva: Mater. Sci. Forum., 2010, vols. 636–637, pp. 671–75.10.4028/www.scientific.net/MSF.636-637.671 ↗
17. V.R. Dizaji, M. Rahmani, M.F. Sani, Z. Nemati, and J. Akbari: Int. J. Mach. Tool. Manuf., 2007, vol. 47, pp. 768–72.10.1016/j.ijmachtools.2006.09.012 ↗
18. T. Viatte, S. Bolognini, T. Cutard, G. Feusier, D. Mari, and W. Benoit: Int. J. Refract. Met. Hard Mater., 1999, vol. 17, pp. 79–89.10.1016/S0263-4368(98)00044-4 ↗
19. J.X. Yang, Z.Y. Xiao, X.H. Miao, X.B. Wang, and F. Yang: Int. J. Refract. Met. Hard Mater., 2015, vol. 52, pp. 6–11.10.1016/j.ijrmhm.2015.04.008 ↗
20. S.K. Putatunda, J. Yang, and R.B. Gundlach: Mater. Des., 2005, vol. 26 pp. 534–44.10.1016/j.matdes.2004.07.015 ↗
21. Z.H. Huang: Cemented Carbide, 2002, vol. 19, pp. 26–28.
22. M. Zhang, Q.Q. Yang, W.H. Xiong, L.Y. Zheng, B. Huang, S. Chen, and Z.H. Yao: J. Alloys Compd., 2015, vol. 650, pp. 700–04.10.1016/j.jallcom.2015.08.009 ↗
23. J.F. Shackelford, Y.H. Han, S. Kim, and S.H. Kwon: CRC Materials Science and Engineering Handbook, 4th ed., CRC Press, Boca Raton, 2016, pp. 15–23.10.1201/b18971 ↗
24. Q.Q. Yang, W.H. Xiong, G.P. Zhang, and B. Huang: J. Am. Ceram. Soc., 2015, vol. 98, pp. 1005–12.10.1111/jace.13359 ↗
25. N. Liu, S. Chao, and X.M. Huang: J. Eur. Ceram. Soc., 2006, vol. 26, pp. 3861–70.10.1016/j.jeurceramsoc.2005.12.010 ↗
26. J.K. Yang and H.C. Lee: Mater. Sci. Eng. A, 1996, vol. 209, pp. 213–17.10.1016/0921-5093(95)10126-8 ↗
27. W.M. Haynes: CRC Handbook of Chemistry and Physics, 95th ed., CRC Press, Boca Raton, 2015, pp. 4-77–4-96.
28. G.B. Dong, J. Xiong, M. Yang, Z.X. Guo, W.C. Wan, and C.H. Yi: J. Cent. South Univ., 2013, vol. 20, pp. 851–58.10.1007/s11771-013-1557-0 ↗
29. S. Chen, W.H. Xiong, Z.H. Yao, G.P. Zhang, X. Chen, B. Huang, and Q.Q. Yang: Int. J. Refract. Met. Hard Mater., 2014, vol. 47, pp. 139–44.10.1016/j.ijrmhm.2014.07.010 ↗
30. P.T. Phong, D.H. Manh, L.C. Hoan, T.V. Ngai, N.X. Phuc, and In-Ja Lee: J. Alloys Compd., 2016, vol. 662, pp. 557–65.10.1016/j.jallcom.2015.12.052 ↗
31. S. Uporov, S. Estemirova, V. Bykov, and V. Mitrofanov: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 39–47.10.1007/s11661-015-3257-x ↗
32. Q.Q. Yang, W.H. Xiong, S.Q. Zhou, M. Zhang, B. Huang, and S. Chen: Mater. Des., 2017, vol. 115, pp. 255–61.10.1016/j.matdes.2016.11.026 ↗
33. M.G. Gee, M.J. Reece, and B. Roebuck: J. Hard Mater., 1992, vol. 3, pp. 119–42.
34. F. Kajzar and G. Parette: Phys. Rev. B, 1979, vol. 20, pp. 2002–13.10.1103/PhysRevB.20.2002 ↗
35. W.S. Chan, K. Mitsuoka, H. Miyajima, and S. Chikazumim: J. Phys. Soc. Jpn., 1980, vol. 48, pp. 822–29.10.1143/JPSJ.48.822 ↗
36. E.R. Stover and J.Wulff: Trans. TMS-AIME, 1959, vol. 215, pp. 127–36.
37. V. Suresh Babu, A.S. Pavlovic, and M.S. Seehra: J. Appl. Phys., 1996, vol. 79, pp. 5230–32.10.1063/1.361856 ↗
38. F.A. Khan, M.A. Asgar, and P. Nordblad: J. Magn. Magn. Mater., 1997, vol. 174, pp. 121–26.10.1016/S0304-8853(97)00182-0 ↗
39. V.S. Sarma, J. Eickemeyer, L. Schultz, and B. Holzapfel: Scripta Mater., 2004, vol. 50, pp. 953–57.10.1016/j.scriptamat.2004.01.004 ↗
40. H.P.J. Wijn: Magnetic Properties of Metals d-Elements, Alloys and Compounds, Springer, 1991, p. 24.10.1007/978-3-642-58218-9 ↗
41. S. Blundell: Magnetism in Condensed Matter, Oxford University Press, New York, 2001, pp. 145–84.10.1093/oso/9780198505921.001.0001 ↗
42. H.W. Xiong, Y.X. Wu, Z.Y. Li, X.P. Gan, K.C. Zhou, and L.Y. Chai: Ceram. Int., 2018, vol. 44, pp. 805–13.10.1016/j.ceramint.2017.10.003 ↗
43. N. Liu, Y.D. Xu, H. Li, G.H. Li, and L.D. Zhang: J. Eur. Ceram. Soc., 2002, vol. 22, pp. 3861–70.
44. Q.Q. Yang, W.H. Xiong, S.Q. Li, and L. Jun: J. Alloys Compd., 2011, vol. 509, pp. 68–72.
45. Y. Zheng, M. You, W.H. Xiong, W.J. Liu, and S.X. Wang: Mater. Chem. Phys., 2003, vol. 82, pp. 877–81.10.1016/j.matchemphys.2003.07.008 ↗
46. Z.M. Shi, D.Y. Zhang, S. Chen, and T.L. Wang: J. Alloys Compd., 2013, vol. 568, pp. 68–72.10.1016/j.jallcom.2013.03.138 ↗