Investigation on Aging σ-Phase Precipitation Kinetics and Pitting Corrosion of 22 Pct Cr Economical Duplex Stainless Steel with Mn Addition
Source abstract
Abstract
The influence of Mn addition on σ-phase precipitation kinetics and pitting corrosion of Fe-22Cr-1.9Ni-2.3Mo-0.2N-xMn low nickel type duplex stainless steel was investigated by medium- and high-temperature aging treatments of 600 °C and 800 °C. The microstructure analysis showed that the fine rod-shaped and coarsening dendritelike σ-phase precipitates formed at 600 °C and 800 °C, respectively, and the precipitate growth with the higher temperature was accelerated due to the partition of Mn, but Mn is not a strong σ-phase forming element like Cr, Mo during aging treatment at these two temperatures. At an early aging time of 800 °C, more precipitated nuclei with more Mn addition promote refinement of σ precipitates in later aging time. The kinetic behavior at 600 °C and 800 °C is related to diffusion-controlled growth of σ phase, and the σ-phase nucleation and growth are enhanced with more Mn addition and higher aging temperature due to a faster Mn diffusion rate. The difference in precipitation morphology for two aging temperatures was attributed to the different nucleation modes caused by kinetics parameter n variation. Increasing the aging temperature from 600 °C to 800 °C increased the susceptibility to pitting with higher Mn addition due to faster σ-phase precipitation kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A.J. Sedriks: Corrosion of Stainless Steel, 2nd ed., Wiley, New York, NY, 1996, pp. 12–25.
2. J. Olsson and M. Snis: Desalination, 2007, vol. 205, pp. 104–13.10.1016/j.desal.2006.02.051 ↗
3. V.S. Moura, L.D. Lima, J.M. Pardal, A.Y. Kina, R.R.A. Corte, and S.S.M. Tavares: Mater. Charact., 2008, vol. 59, pp. 1127–32.10.1016/j.matchar.2007.09.002 ↗
4. Della Rovere, C.A. Santos, F.S. Silva, and R. Souza: Corros. Sci., 2013, vol. 68, pp. 84–90.10.1016/j.corsci.2012.10.038 ↗
5. Y.H. Jang, S.S. Kim, and J.H. Lee: Mater. Sci. Eng. A, 2005, vol. 396, pp. 302–10.10.1016/j.msea.2005.01.046 ↗
6. Ihsan-ul-Haq Toor, Park Jung Hyun, and Hyuk Sang Kwon: Corros. Sci., 2008, vol. 50, pp. 404–10.10.1016/j.corsci.2007.07.004 ↗
7. R.F.A. Jargelius-Pettersson: Corrosion, 1998, vol. 54, pp. 162–68.10.5006/1.3284840 ↗
8. J. Wang, P.J. Uggowitzer, and R. Magdowski: Scripta Mater., 1998, vol. 40, pp. 123–29.10.1016/S1359-6462(98)00396-0 ↗
9. P.J. Hyun and H.S. Kwon: Corros. Sci., 2008, vol. 50, pp. 404–10.10.1016/j.corsci.2007.07.004 ↗
10. I.F. Machado and A.F. Padilha: ISIJ Int., 2000, vol. 40 (7), pp. 719–24.10.2355/isijinternational.40.719 ↗
11. J. Li, Y. Xu, X. Xiao, J. Zhao, L. Jiang, and J. Hu: Mater. Sci. Eng. A, 2009, vol. 527 (1), pp. 245–51.10.1016/j.msea.2009.07.065 ↗
12. C.C. Hsieh, D.Y. Lin, and W. Wu: Mater. Sci. Eng. A, 2007, vol. 467 (1), pp. 181–89.10.1016/j.msea.2007.02.107 ↗
13. M. Pohl, O. Storz, and T. Glogowski: Mater. Charact., 2007, vol. 58, pp. 65–71.10.1016/j.matchar.2006.03.015 ↗
14. K.L. Weng, H.R. Chen, and J.R. Yang: Mater. Sci. Eng. A, 2004, vol. 379, pp. 119–32.10.1016/j.msea.2003.12.051 ↗
15. E. Johnson, Y.J. Kim, L.S. Chumbley, and B. Gleeson: Scripta Mater., 2004, vol. 50, pp. 1351–54.10.1016/j.scriptamat.2004.02.014 ↗
16. ASTME 562: Standard Practice for Determining Volume Fraction by Systematic Manual Point Count.
17. K.M. Lee, H.S. Cho, and D.C. Choi: J. Alloys Compd., 1999, vol. 285, pp. 156–61.10.1016/S0925-8388(99)00014-6 ↗
18. I. Zucato, M.C. Moreira, I.F. Machado, and S.M.G. Lebrao: Mater. Res., 2002, vol. 5 (3), pp. 385–89.10.1590/S1516-14392002000300026 ↗
19. Sang-Beom Kim, Kyung-Wook Paik, and Young-Gil Kim: Mater. Sci. Eng. A, 1998, vol. 247, pp. 67–74.10.1016/S0921-5093(98)00473-0 ↗
20. C.H. Shek, K.W. Wong, and J.K.L. Lai: Mater. Sci. Eng. R, 1997, vol. 19, pp. 153–99.10.1016/S0927-796X(97)00001-6 ↗
21. J.J. Kim, L.S. Chumbley, and B. Gleeson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3377–86.10.1007/s11661-004-0174-9 ↗
22. R. Badji, M. Bouabdallah, B. Bacroix, C. Kahloun, K. Bettahar, and N. Kherrouba: Mater. Sci. Eng. A, 2008, vol. 496 (1), pp. 447–54.10.1016/j.msea.2008.06.024 ↗
23. D.C. Dos Santos and R. Magnabosco: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1554–65.10.1007/s11661-016-3323-z ↗
24. T. Berecz, É. Fazakas, I. Mészáros, and I. Sajó: J. Mater. Eng. Perform., 2015, vol. 24 (12), pp. 4777–88.10.1007/s11665-015-1793-6 ↗
25. Y. Ohmori and Y. Maehara: ISIJ Int., 1984, vol. 24 (1), pp. 60–68.10.2355/isijinternational1966.24.60 ↗
26. S. Kobayashi and T. Yakou: Mater. Sci. Eng. A, 2002, vol. 338 (1), pp. 44–53.10.1016/S0921-5093(02)00053-9 ↗
27. B. Weiss and R. Stickler: Mater. Trans., 1972, vol. 3 (4), pp. 851–66.10.1007/BF02647659 ↗
28. R.K. Wild: Chemischer Informationsdienst, 1977, vol. 8 (21), pp. 87–93.10.1002/chin.197721023 ↗
29. K.L. Weng, H.R. Chen, and J.R. Yang: Mater. Sci. Eng. A, 2004, vol. 379 (1), pp. 119–32.10.1016/j.msea.2003.12.051 ↗
30. Z. Feng, Y. Yang, B. Huang, M. Han, X. Luo, and J. Ru: Mater. Sci. Eng. A, 2010, vol. 528 (2), pp. 706–14.10.1016/j.msea.2010.09.069 ↗
31. 32.C. Hin, Y. Bréchet, P. Maugis, and F. Soisson: Acta Mater., 2008, vol. 56(19), pp. 5535–43.10.1016/j.actamat.2008.07.044 ↗
32. L. Zhang, Y. Jiang, B. Deng, W. Zhang, J. Xu, and J. Li: Mater. Charact., 2009, vol. 60 (12), pp. 1522–28.10.1016/j.matchar.2009.08.009 ↗
33. J. Hu, K. Tian, and W.Y. Chu: J. Mater. Sci., 2005, vol. 40 (19), pp. 5147–51.10.1007/s10853-005-4404-3 ↗