journal article·2018-05Open access

Microstructure and Porosity of Laser Welds in Cast Ti-6Al-4V with Addition of Boron

Sakari Tolvanen, Robert Pederson, Uta Klement

Abstract

Abstract Addition of small amounts of boron to cast Ti-6Al-4V alloy has shown to render a finer microstructure and improved mechanical properties. For such an improved alloy to be widely applicable for large aerospace structural components, successful welding of such castings is essential. In the present work, the microstructure and porosity of laser welds in a standard grade cast Ti-6Al-4V alloy as well as two modified alloy versions with different boron concentrations have been investigated. Prior-β grain reconstruction revealed the prior-β grain structure in the weld zones. In fusion zones of the welds, boron was found to refine the grain size significantly and rendered narrow elongated grains. TiB particles in the prior-β grain boundaries in the cast base material restricted grain growth in the heat-affected zone. The TiB particles that existed in the as cast alloys decreased in size in the fusion zones of welds. The hardness in the weld zones was higher than in the base material and boron did not have a significant effect on hardness of the weld zones. The fusion zones were smaller in the boron-modified alloys as compared with Ti-6Al-4V without boron. Computed tomography X-ray investigations of the laser welds showed that pores in the FZ of the boron modified alloys were confined to the lower part of the welds, suggesting that boron addition influences melt pool flow.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. M.J. Donachie: Titanium A Technical Guide, 2nd ed., ASM International, 2000.10.31399/asm.tb.ttg2.9781627082693 ↗
2. K.K. Murthy, N.B. Potluri, and S. Sundaresan: Mater. Sci. Technol., 1997, vol. 13, pp. 503–10.10.1179/mst.1997.13.6.503 ↗
3. T. Vilaro, C. Colin, and J.D. Bartout: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2011, vol. 42, pp. 3190–9.10.1007/s11661-011-0731-y ↗
4. G. Lütjering and J.C. William: Titanium, Springer-Verlag Berlin Heidelberg New York, 2003.10.1007/978-3-540-71398-2 ↗
5. S. Sundaresan, G.D. Janaki Ram, and G. Madhusudhan Reddy: Mater. Sci. Eng. A, 1999, vol. 262, pp. 88–100.10.1016/S0921-5093(98)01010-7 ↗
6. R. Pederson, R. Gaddam, and M.-L. Antti: Cent. Eur. J. Eng., 2012, vol. 2, pp. 347–57.
7. S. Roy, S. Suwas, S. Tamirisakandala, D.B. Miracle, and R. Srinivasan: Acta Mater., 2011, vol. 59, pp. 5494–510.10.1016/j.actamat.2011.05.023 ↗
8. S. Tamirisakandala, R.B. Bhat, J.S. Tiley, and D.B. Miracle: Scr. Mater., 2005, vol. 53, pp. 1421–6.10.1016/j.scriptamat.2005.08.020 ↗
9. M.J. Bermingham, D. Kent, H. Zhan, D.H. StJohn, and M.S. Dargusch: Acta Mater., 2015, vol. 91, pp. 289–303.10.1016/j.actamat.2015.03.035 ↗
10. S.A. Mantri, T. Alam, D. Choudhuri, C.J. Yannetta, C. V. Mikler, P.C. Collins, and R. Banerjee: J. Mater. Sci., 2017, vol. 52, pp. 12455–66.10.1007/s10853-017-1371-4 ↗
11. Z. Mahbooba, H. West, O. Harrysson, A. Wojcieszynski, R. Dehoff, P. Nandwana, and T. Horn: Jom, 2017, vol. 69, pp. 472–8.10.1007/s11837-016-2210-9 ↗
12. L. Germain, N. Gey, R. Mercier, P. Blaineau, and M. Humbert: Acta Mater., 2012, vol. 60, pp. 4551–62.10.1016/j.actamat.2012.04.034 ↗
13. J.S. Tiley, A.R. Shiveley, A.L. Pilchak, P.A. Shade, and M.A. Groeber: J. Microsc., 2014, vol. 255, pp. 71–7.10.1111/jmi.12137 ↗
14. G.Q. Wang, Z.B. Zhao, B.B. Yu, J.R. Liu, Q.J. Wang, J.H. Zhang, R. Yang, and J.W. Li: Acta Metall. Sin. (English Lett.), 2017, vol. 30, pp. 499–504.10.1007/s40195-017-0528-0 ↗
15. W.G. Burgers: Physica, 1934, vol. 1, pp. 561–86.10.1016/S0031-8914(34)80244-3 ↗
16. J. Zhu, A. Kamiya, T. Yamada, W. Shi, and K. Naganuma: Mater. Sci. Eng. A, 2003, vol. 339, pp. 53–62.10.1016/S0921-5093(02)00102-8 ↗
17. H. Okamoto: J. Phase Equilibria Diffus., 2006, vol. 27, p. 303.10.1361/154770306X109953 ↗
18. S. Tamirisakandala, R.B. Bhat, D.B. Miracle, S. Boddapati, R. Bordia, R. Vanover, and V.K. Vasudevan: Scr. Mater., 2005, vol. 53, pp. 217–22.10.1016/j.scriptamat.2005.03.038 ↗
19. J.E. Blackburn: Understanding Porosity Formation and Prevention when Welding Titanium Alloys with 1 µm Wavelength Laser Beams, The University of Manchester, 2011, p. 224.
20. J. Huang: The Characterisation and Modelling of Porosity Formation in Electron Beam Welded Titanium Alloys, The University of Birmingham, 2011, p. 180.