Influence of Grain Coarsening on the Creep Parameters During the Superplastic Deformation of a Severely Friction Stir Processed Al-Zn-Mg-Cu Alloy
Source abstract
Abstract
During grain boundary sliding in ultrafine-grain materials at intermediate temperatures and high strain rates (~10 s), apparent creep parameters usually deviate from the theoretical values, due to microstructural coarsening. An analysis has been carried out in a severely friction stir processed (FSP) 7075 alloy with three different ultra-fine grain sizes (L), obtaining explicit grain size dependence of the creep parameters n = n(L) and Q = Q(L), confirming the validity of the theoretical values of these parameters in the constitutive equation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. O.A. Ruano and O.D. Sherby: Rev. Phys. Appliquée, 1988, vol. 23, pp. 625–37.10.1051/rphysap:01988002304062500 ↗
2. R. Valiev: Nat. Mater., 2004, vol. 3, pp. 511–16.10.1038/nmat1180 ↗
3. Yuntian T Zhu, Terry C Lowe, and Terence G Langdon: Scr. Mater., 2004, vol. 51, pp. 825–30.10.1016/j.scriptamat.2004.05.006 ↗
4. R. K. Islamgaliev, R. Z. Valiev, R. S. Mishra, and A. K. Mukherjee: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 206–10.10.1016/S0921-5093(00)01440-4 ↗
5. R. Z. Valiev: Met. Mater. Int., vol. 7, pp. 413–20.10.1007/BF03027081 ↗
6. C. M. Cepeda-Jiménez, M. Castillo-Rodríguez, J. M. Molina-Aldareguia, Y. Huang, T. G. Langdon, and M. T. Pérez-Prado: Mater. Sci. Eng. A, 2017, vol. 679, pp. 36–47.10.1016/j.msea.2016.10.026 ↗
7. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: EP0615480 B01., 1995.
8. J.-Q. Su, T.W. Nelson, and C.J. Sterling: J. Mater. Res., 2003, vol. 18, pp. 1757–60.10.1557/JMR.2003.0243 ↗
9. Z. Y. Ma and R. S. Mishra: Scr. Mater., 2005, vol. 53, pp. 75–80.10.1016/j.scriptamat.2005.03.018 ↗
10. J. A. del Valle, P. Rey, D. Gesto, D. Verdera, J. A. Jiménez, and O. A. Ruano: Mater. Sci. Eng. A, 2015, vol. 628, pp. 198–206.10.1016/j.msea.2015.01.030 ↗
11. A. Orozco-Caballero, P. Hidalgo-Manrique, C. M. Cepeda-Jiménez, P. Rey, D. Verdera, O. A. Ruano, and F. Carreño: Mater. Charact., 2016, vol. 112, pp. 197–205.10.1016/j.matchar.2015.12.014 ↗
12. Jian-Qing Su, Tracy W. Nelson, and Colin J. Sterling: Scr. Mater., 2005, vol. 52, pp. 135–40.10.1016/j.scriptamat.2004.09.014 ↗
13. M Conserva, M Buratti, E Di Russo, and F Gatto: Mater. Sci. Eng., 1973, vol. 11, pp. 103–12.10.1016/0025-5416(73)90050-5 ↗
14. P. Cavaliere and A. Squillace: Mater. Charact., 2005, vol. 55, pp. 136–42.10.1016/j.matchar.2005.04.007 ↗
15. L. B. Johannes and R. S. Mishra: Mater. Sci. Eng. A, 2007, vol. 464, pp. 255–60.10.1016/j.msea.2007.01.141 ↗
16. A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida: CIRP Ann. - Manuf. Technol., 2008, vol. 57, pp. 716–35.10.1016/j.cirp.2008.09.005 ↗
17. Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782–817.10.1016/j.actamat.2012.10.038 ↗
18. K. Wang, F. C. Liu, P. Xue, B. L. Xiao, and Z. Y. Ma: J. Mater. Sci., 2014, vol. 50, pp. 1006–15.10.1007/s10853-014-8660-y ↗
19. A. Orozco-Caballero, C. M. Cepeda-Jiménez, P. Hidalgo-Manrique, P. Rey, D. Gesto, D. Verdera, O. A. Ruano, and F. Carreño: Mater. Chem. Phys., 2013, vol. 142, pp. 182–85.10.1016/j.matchemphys.2013.06.055 ↗
20. M. Taheri-Mandarjani, A. Zarei-Hanzaki, and H. R. Abedi: Mater. Sci. Eng. A, 2015, vol. 637, pp. 107–22.10.1016/j.msea.2015.03.038 ↗
21. O.D. Sherby, R.H. Klundt, and A.K. Miller: Metall. Trans. A, n.d, vol. 8, pp. 843–50.10.1007/BF02661565 ↗
22. O. Ruano and O. Sherby: Rev. Metal., 1983, vol. 19, pp. 261–70.
23. A.H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng. R Rep., 1993, vol. 10, pp. 237–74.10.1016/0927-796X(93)90009-R ↗
24. S.-W. Lee and J.-W. Yeh: Mater. Sci. Eng. A, 2007, vol. 460–461, pp. 409–19.10.1016/j.msea.2007.01.121 ↗
25. M.M. El Rayes, E.A. El Danaf, and M.S. Soliman: Mater. Des., 2011, vol. 32, pp. 1916–22.10.1016/j.matdes.2010.12.004 ↗
26. O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1968, vol. 13, pp. 323–90.10.1016/0079-6425(68)90024-8 ↗
27. K. Turba, P. Málek, E.F. Rauch, F. Robaut, and M. Cieslar: Int. J. Mater. Res., 2009, vol. 100, pp. 851–57.10.3139/146.110105 ↗
28. P. Hidalgo-Manrique, C. M. Cepeda-Jiménez, A. Orozco-Caballero, O. A. Ruano, and F. Carreño: Mater. Sci. Eng. A, 2014, vol. 606, pp. 434–42.10.1016/j.msea.2014.03.105 ↗
29. P. Hidalgo-Manrique, A. Orozco-Caballero, C. M. Cepeda-Jiménez, O. A. Ruano, and F. Carreño: J. Mater. Sci. Technol., 2016, vol. 32, pp. 774–82.10.1016/j.jmst.2016.06.004 ↗
30. J. M. García-Infanta, A. P. Zhilyaev, A. Sharafutdinov, O. A. Ruano, and F. Carreño: J. Alloys Compd., 2009, vol. 473, pp. 163–66.10.1016/j.jallcom.2008.06.006 ↗
31. C. M. Cepeda-Jiménez, J. M. García-Infanta, O. A. Ruano, and F. Carreño: J. Alloys Compd., 2011, vol. 509, pp. 9589–97.10.1016/j.jallcom.2011.07.076 ↗
32. A. Orozco-Caballero, M. Álvarez-Leal, P. Hidalgo-Manrique, C Cepeda-Jiménez M., O.A. Ruano, and F. Carreño: Mater. Sci. Eng. A, 2017, vol. 680, pp. 329–37.10.1016/j.msea.2016.10.113 ↗
33. W Köster: Z. Für Met., 1948, vol. 39, pp. 1–9.
34. T.S. Lundy and J.F. Murdock: J. Appl. Phys., 1962, vol. 33, pp. 1671–73.10.1063/1.1728808 ↗
35. D. Caillard and J.L. Martin: Rev. Phys. Appliquée, 1987, vol. 22, pp. 169–83.10.1051/rphysap:01987002203016900 ↗
36. H. J. Frost and M. F. Ashby: Deformation Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, UK, 1982.
37. A. Orozco-Caballero, S. K. Menon, C. M. Cepeda-Jiménez, P. Hidalgo-Manrique, T. R. McNelley, O. A. Ruano, and F. Carreño: Mater. Sci. Eng. A, 2014, vol. 612, pp. 162–71.10.1016/j.msea.2014.06.017 ↗
38. H. Lüthy, R.A. White, and O.D. Sherby: Mater. Sci. Eng., 1979, vol. 39, pp. 211–16.10.1016/0025-5416(79)90060-0 ↗
39. Z. Y Ma, R. S Mishra, and M. W Mahoney: Acta Mater., 2002, vol. 50, pp. 4419–30.10.1016/S1359-6454(02)00278-1 ↗
40. R. S. Mishra and Z. Y. Ma: Mater. Sci. Eng. R Rep., 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
41. I. Charit and R. S. Mishra: Acta Mater., 2005, vol. 53, pp. 4211–23.10.1016/j.actamat.2005.05.021 ↗
42. Z. Y. Ma, R. S. Mishra, and F. C. Liu: Mater. Sci. Eng. A, 2009, vol. 505, pp. 70–78.10.1016/j.msea.2008.11.016 ↗
43. Y Huang, N Ridley, F. J Humphreys, and J. -Z Cui: Mater. Sci. Eng. A, 1999, vol. 266, pp. 295–302.10.1016/S0921-5093(98)00958-7 ↗
44. X. Yang, H. Miura, and T. Sakai: Mater. Trans., 2002, vol. 43, pp. 2400–2407.10.2320/matertrans.43.2400 ↗
45. Y. Kwon and Y. Chang: J. Mater. Eng. Perform., n.d., vol. 10, pp. 60–65.10.1361/105994901770345367 ↗
46. F. Carreño and O. A. Ruano: Acta Mater., 1998, vol. 46, pp. 159–67.10.1016/S1359-6454(97)00217-6 ↗
47. F. Carreño and O. A. Ruano: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 371–76.10.1007/s11661-999-0326-z ↗
48. F. Carreño and O. A. Ruano: Rev. Metal., 2001, vol. 37, pp. 215–19.10.3989/revmetalm.2001.v37.i2.468 ↗
49. F. C. Liu and Z. Y. Ma: Mater. Sci. Eng. A, 2011, vol. 530, pp. 548–58.10.1016/j.msea.2011.10.018 ↗