The Effect of TiO2 and B2O3 Additions on the Grain Growth of ZnO
Source abstract
Abstract
The microstructure properties and grain growth kinetics of ZnO-B2O3-TiO2 ceramics with 0.5 and 1 mol pct doping of TiO2 were investigated. The samples were sintered at 1373 K, 1473 K, and 1573 K (1100 °C, 1200 °C, and 1300 °C) for 1, 2, and 3 hours. The bulk density and grain size of ZnO samples increased with the addition of B2O3 and TiO2. The grain size of 0.5 mol pct TiO2-doped ZnO ceramics was larger than the grain size of the 1 mol pct TiO2-doped ZnO ceramics. This is due to the increase in the ZnTi2O4 phase for the 1 mol pct TiO2-doped ZnO ceramics. The value of grain growth kinetic parameters (n and Q) increased when the TiO2 content in ZnO ceramics increased from 0.5 to 1 mol pct. The lowest n and Q values were obtained for the 0.5 mol pct B2O3-doped ZnO samples which showed that the addition of B2O3 has a significant role on the grain growth of ZnO ceramics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Y. Hong, C.H. Kim, J. Shin, K.Y. Kim, J.S. Kim, C.S. Hwang, and J.H. Lee: Sens. Actuators B, 2016, vol. 232, pp. 653–9.10.1016/j.snb.2016.04.010 ↗
2. A. Taabouche, A. Bouabellou, F. Kermiche, F. Hanini, C. Sedrati, Y. Bouachiba, and C. Benazzouz: Ceram. Int., 2016, vol. 42, pp. 6701–06.10.1016/j.ceramint.2016.01.033 ↗
3. Y. Dkhissi, S. Meyer, D. Chen, H.C. Weerasinghe, L. Spiccia, Y.B. Cheng, and R.A. Caruso: ChemSusChem, 2016, vol. 9, pp. 687–95.10.1002/cssc.201501659 ↗
4. M. Yılmaz and Ş. Aydoğan: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2726–35.10.1007/s11661-015-2875-7 ↗
5. F. Gao, D. Zhang, J. Wang, H. Sun, Y. Yin, Y. Sheng, S. Yan, B. Yan, C. Sui, Y. Zheng, Y. Shi, and J. Liu: Appl. Phys. Lett., 2016, vol. 108, pp. 261103 1–4.
6. A. Tereshchenko, M. Bechelany, R. Viter, V. Khranovskyy, V. Smyntyna, N. Starodub, and R. Yakimova: Sens. Actuators B, 2016, vol. 229, pp. 664–77.10.1016/j.snb.2016.01.099 ↗
7. R. Baraki, P. Zierep, E. Erdem, S. Weber, and T. Granzow: J. Phys. Condens. Matter, 2014, vol. 26, pp. 115801 1–6.10.1088/0953-8984/26/11/115801 ↗
8. B. Yuksel and T.O. Ozkan: Mater. Sci. Pol., 2015, vol. 33, pp. 220–9.10.1515/msp-2015-0029 ↗
9. F. Oba, S.R. Nishitani, S. Isotani, H. Adachi, and I. Tanaka: J. Appl. Phys., 2001, vol. 90, pp. 824–8.10.1063/1.1380994 ↗
10. B. Yüksel Price, G. Hardal, M. Açıkgöz, S. Repp, and E. Erdem: J. Appl. Phys., 2015, vol. 118, pp. 175705 1–9.10.1063/1.4935085 ↗
11. A. Mekap, P.R. Das, and R.N.P. Choudhary: J. Electron. Mater., 2016, vol. 45, pp. 4338–49.10.1007/s11664-016-4619-x ↗
12. Y. Beynet, A. Izoulet, S. Guillemet-Fritsch, G. Chevallier, V. Bley, T. Pérel, F. Malpiece, J. Morel, and C. Estournès: J. Eur. Ceram. Soc., 2015, vol. 35, pp. 1199–208.10.1016/j.jeurceramsoc.2014.10.007 ↗
13. H. Zhao, J. Hu, S. Chen, Q. Xie, and J. He: J. Am. Ceram. Soc., 2016, vol. 99, pp. 769–72.10.1111/jace.14110 ↗
14. D. Umaru, A. Zakaria, C.A.C. Abdullah, I.I. Lakin, and Y. Abdollahi: Dig. J. Nanomater. Biostruct., 2016, vol. 11, pp. 707–14.
15. S. Pandey, D. Kumar, and O. Parkash: Ceram. Int., 2016, vol. 42, pp. 9686–96.10.1016/j.ceramint.2016.03.057 ↗
16. Z. Nie, Y. Lin, and F. Wang: J. Eng. Mater. Technol., 2015, vol. 137, pp. 031010 1–6.10.1115/1.4030412 ↗
17. J.P. Guha, S. Kunej, and D. Suvorov: J. Mater. Sci. 2004, vol. 39, pp. 911–8.10.1023/B:JMSC.0000012921.62765.05 ↗
18. H.H. Hng and L. Halim: Mater. Lett., 2003, vol. 57, pp. 1411–6.10.1016/S0167-577X(02)00999-0 ↗
19. N. Daneu, A. Recnik, and S. Bernik: J. Am. Ceram. Soc., 2003, vol. 86, pp. 1379–84.10.1111/j.1151-2916.2003.tb03479.x ↗
20. K.G.V. Kumari, P.D. Vasu, V. Kumar, and T. Asokan: J. Am. Ceram. Soc., 2002, vol. 85, pp. 703–5.10.1111/j.1151-2916.2002.tb00155.x ↗
21. J. Han, P.Q. Mantas, and A.M.R. Senos: J. Mater. Res., 2001, vol. 16, pp. 459–68.10.1557/JMR.2001.0069 ↗
22. O.A. Desouky and K.E. Rady: Chin. Phys. B, 2016, vol. 25, pp. 068402 1–6.10.1088/1674-1056/25/6/068402 ↗
23. J.Y. Park, S.W. Choi, J.W. Lee, C. Lee, and S.S. Kim: J. Am. Ceram. Soc., 2009, vol. 92, pp. 2551–4.10.1111/j.1551-2916.2009.03270.x ↗
24. S. Ayed, R.B. Belgacem, J.O. Zayani, and A. Matoussi: Superlattice Microstruct., 2016, vol. 91, pp. 118–28.10.1016/j.spmi.2016.01.004 ↗
25. H.T. Kim, S.H. Kim, S. Nahm, J.D. Byun, and Y. Kim: J. Am. Ceram. Soc., 1999, vol. 82, pp. 3043–8.10.1111/j.1151-2916.1999.tb02200.x ↗
26. Q.L. Zhang, H. Yang, J.L. Zou, and H.P. Wang: Mater. Lett., 2005, vol. 59, pp. 880–4.10.1016/j.matlet.2004.11.036 ↗
27. M. Dorraj, A. Zakaria, Y. Abdollahi, M. Hashim, and S. Moosavi: Sci. World J., 2014, vol. 2014, pp. 741034 1–9.10.1155/2014/741034 ↗
28. A. Peigney, H. Andrianjatov, R. Legros, and A. Rousset: J. Mater. Sci., 1992, vol. 27, pp. 2397–405.10.1007/BF01105049 ↗
29. K. Yıldız, N. Karaku, N. Toplan, and H.Ö. Toplan: Mater. Sci. Pol., 2007, vol. 25, pp. 1135–42.
30. H. Feng, Z. Peng, X. Fu, Z. Fu, C. Wang, L. Qi, and H. Miao: J. Alloys Compd., 2010, vol. 497, pp. 304–7.10.1016/j.jallcom.2010.03.047 ↗
31. T. Senda and R.C. Bradt: J. Am. Ceram. Soc., 1990, vol. 73, pp. 106–14.10.1111/j.1151-2916.1990.tb05099.x ↗
32. T. Senda and R.C. Bradt: J. Am. Ceram. Soc., 1991, vol. 74, pp. 1296–1302.10.1111/j.1151-2916.1991.tb04101.x ↗
33. J. Han, P.Q. Mantas, and A.M.R. Senos: J. Eur. Ceram. Soc., 2000, vol. 20, pp. 2753–8.10.1016/S0955-2219(00)00220-X ↗
34. G. Hardal and B. Yüksel: in Characterization of Minerals, Metals, and Materials 2014, J.S. Carpenter, C. Bai, J.-Y. Hwang, S. Ikhmayies, B. Li, S.N. Monteiro, Z. Peng, and M. Zhang, eds., Wiley, Hoboken, NJ, 2014, pp. 637–44.
35. K. Park and K.Y. Ko: J. Alloys Compd., 2007, vol. 430, pp. 200–4.10.1016/j.jallcom.2006.04.065 ↗
36. S. Kim, H. Yoon, D.Y. Kim, S.-O. Kim, and J.-Y. Leem: Opt. Mater., 2013, vol. 35, pp. 2418–24.10.1016/j.optmat.2013.06.048 ↗
37. B.N. Pawar, S.R. Jadkar, and M.G. Takwale: J. Phys. Chem. Solids, 2005, vol. 66, pp. 1779–82.10.1016/j.jpcs.2005.08.086 ↗
38. J. Li, W. Songping, D. Xiaohong, and N. Jing: J. Mater. Sci. Mater. Electron., 2009, vol. 20, pp. 1186–92.
39. Z.C. Feng: Handbook of Zinc Oxide and Related Materials, 1st ed., CRC Press, Boca Raton, FL, 2013, pp. 7–9.
40. T. Tian, L. Cheng, L. Zheng, J. Xing, H. Gu, S. Bernik, H. Zeng, W. Ruan, K. Zhao, and G. Li: Acta Mater., 2016, vol. 119, pp. 136–44.10.1016/j.actamat.2016.08.026 ↗
41. K. Güntürkün and H.Ö. Toplan: Ceram. Silik., 2006, vol. 50, pp. 225–31.
42. B.L. Zhu, C.S. Xie, W.Y. Wang, K.J. Huang, and J.H. Hu: Mater. Lett., 2004, vol. 58, pp. 624–9.10.1016/S0167-577X(03)00582-2 ↗
43. H. Suzuki and R.C. Bradt: J. Am. Ceram. Soc., 1995, vol. 78, pp. 1354–60.10.1111/j.1151-2916.1995.tb08494.x ↗
44. H.Ö. Toplan and Y. Karakaş: Ceram. Int., 2002, vol. 28, pp. 911–5.10.1016/S0272-8842(02)00073-1 ↗
45. F. Liu, G. Xu, L. Duan, Y. Li, Y. Li, and P. Cui: J. Alloys Compd., 2011, vol. 509, pp. L56–8.10.1016/j.jallcom.2010.10.074 ↗