journal article·2017-03Open access

The Effect of Surface Preparation on the Precipitation of Sigma During High Temperature Exposure of S32205 Duplex Stainless Steel

Mark A. E. Jepson, Matthew Rowlett, Rebecca L. Higginson

Abstract

Abstract Although the formation of sigma phase in duplex stainless steels is reasonably well documented, the effect of surface finish on its formation rate in surface regions has not been previously noted. The growth of the sigma phase precipitated in the subsurface region (to a maximum depth of 120 μm) has been quantified after heat treatment of S32205 duplex stainless steel at 1073 K (800 °C) and 1173 K (900 °C) after preparation to two surface finishes. Here, results are presented that show that there is a change in the rate of sigma phase formation in the surface region of the material, with a coarser surface finish leading to a greater depth of precipitation at a given time and temperature of heat treatment. The growth rate and morphology of the precipitated sigma has been examined and explored in conjunction with thermodynamic equilibrium phase calculations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Nilsson, J. -O: Materials Science and Technology 8:685–700 (1992).10.1179/mst.1992.8.8.685 ↗
2. Fargas, G, Anglada, M and Mateo, A: Journal of Materials Processing Technology, 2009, Vol. 209, pp. 1770-1782.10.1016/j.jmatprotec.2008.04.026 ↗
3. Villanueva, D. M. E., Junior, F. C. P., Plaut, R. L. and Padilha, A. F: Materials Science and Technology, 2006, Vol. 22, pp. 1098-1104.10.1179/174328406X109230 ↗
4. Maehara, Y, Ohmori, Y and Kunitake, T: Metals Technology, 1983, Vol. 10, pp. 296-303.10.1179/030716983803291406 ↗
5. Chan, K. W. and Tjong, S. C: Materials, 2014, Vol. 7, pp. 5268-5304.10.3390/ma7075268 ↗
6. Badji, R, Bouabdallah, M, Bacroix, B, Kahloun, C, Belkessa, B. and Maza, H: Materials Characterization, 2008, Vol. 59, pp. 447-453.10.1016/j.matchar.2007.03.004 ↗
7. Hsieh, C. -C and W, W: ISRN Metallurgy, 2012, Vol. 2012, pp. 1-1610.5402/2012/732471 ↗
8. Magnabosco, R: Materials Research, 2009, Vol. 12, pp. 321-337.10.1590/S1516-14392009000300012 ↗
9. Jepson, M. A. E. and Higginson, R. L: Corrosion Science, 2012, Vol. 59, pp. 263-269.10.1016/j.corsci.2012.03.011 ↗
10. Jepson, M. A. E. and Higginson, R. L: Corrosion Science, 2009, Vol. 51, pp. 588-594.10.1016/j.corsci.2008.11.023 ↗
11. Jimenez, J. A., Carsi, M, Ruano, O. A. and Penalba, F: Journal of Materials Science, 2000, Vol. 35, pp. 907-915.10.1023/A:1004750424897 ↗
12. Garin, J. L. and Mannheim, R. L: Powder Diffraction, 2012, Vol. 27, pp. 131-135.10.1017/S0885715612000383 ↗
13. Elmer, J. W., Palmer, T. A. and Specht, E. D: Metallurgical and Materials Transactions A, 2007, Vol. 38, pp. 464-475.10.1007/s11661-006-9076-3 ↗
14. Borvik, T, Lange, H, Marken, L. A., Langseth, M, Hopperstad, O. S., Aursand, M and Rorvig, G: Materials Science and Engineering A, 2010, Vol. 527, pp. 6945-6955.10.1016/j.msea.2010.06.087 ↗
15. Pohl, M, Storz, O and Glogowski, T: Materials Characterization, 2007, Vol. 58, pp. 65-71.10.1016/j.matchar.2006.03.015 ↗
16. Kashiwar, A, Phani Vennela, N, Kamath, S. L. and Khatirkar, R. K: Materials Characterization, 2015, Vol. 74, pp. 55-63.10.1016/j.matchar.2012.09.008 ↗
17. Cho HS, Lee K (2013) Materials Characterization 75:29-34.10.1016/j.matchar.2012.10.006 ↗
18. Abe, F, Araki, H and Noda, T: Materials Science and Technology, 1988, Vol. 4, pp. 885-893.10.1179/mst.1988.4.10.885 ↗
19. Child, D. J., West, G. D. and Thomson, R. C: Acta Materialia, 2011, Vol. 59, pp. 4825-4834.10.1016/j.actamat.2011.04.025 ↗
20. Pinard, P. T., Hovington, P, Lagace, M, Vander Voort, G. F., Gauvin, R: Microscopy and Microanalysis, 2010, Vol. 16 (Suppl 2), pp. 700-701.10.1017/S1431927610059295 ↗
21. Taylor, W and White, J. S: Journal of Materials Science, 1974, Vol. 9, pp. 569-575.10.1007/BF02387530 ↗