Computer-Assisted Optimization of Electrodeposited Hydroxyapatite Coating Parameters on Medical Alloys
Source abstract
Abstract
CoCrMo bio-metallic alloys were coated with a hydroxyapatite (HA) film by electrodeposition using various electrochemical parameters. Response surface methodology and central composite design were used to optimize deposition parameters such as electrolyte pH, deposition potential, and deposition time. The effects of the coating parameters were evaluated within the limits of solution pH (3.66 to 5.34), deposition potential (−1.13 to −1.97 V), and deposition time (6.36 to 73.64 minutes). A 5-level-3-factor experimental plan was used to determine ideal deposition parameters. Optimum conditions for the deposition parameters of the HA coating with high in vitro corrosion performance were determined as electrolyte pH of 5.00, deposition potential of −1.8 V, and deposition time of 20 minutes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · High Entropy Alloys Studies · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. B. ParkJoon and D. BronzinoJoseph: Biomaterials Principles and Applications, CRC Press, Boca Raton, FL, 2003, pp. 1–5.
2. K. Grandfield, A. Palmquist, S. Gonçalves, A. Taylor, M. Taylor, L. Emanuelsson, P. Thomsen, and H. Engqvist: J. Mater. Sci. Mater. Med., 2011, vol. 22, pp. 899–906.10.1007/s10856-011-4253-3 ↗
3. T. P. S. Sarao, H. S. Sidhu and H. Singh: Metall. Trans. A, 2012, vol. 43, pp. 4365-4376.10.1007/s11661-012-1175-8 ↗
4. L.-N. Wang, J.-L. Luo: Metall. Trans. A, 2011, vol. 42, pp 3255-3264.10.1007/s11661-010-0484-z ↗
5. Z. Sam: Hydroxyapatite Coatings for Biomedical Applications, CRC Press, Boca Raton, FL, 2013, pp. 1-4.
6. M. Razavi, M. Fathi, O. Savabi, D. Vashaee and L. Tayebi: Metall. Trans. A, 2015, vol. 46, pp. 1394-1404.10.1007/s11661-014-2694-2 ↗
7. W.-J. Shih, M.-C. Wang, K.-M. Chang, C.-L. Wang, S.-H. Wang, W.-L. Li and H.-H. Huang: Metall. Trans. A, 2010, vol. 41, pp. 3509-3516.10.1007/s11661-010-0417-x ↗
8. M. A. L. Heredia, P. Weiss and P. Layrolle: J Mater Sci: Mater Med, 2007, vol. 18, pp. 381-390.10.1007/s10856-006-0703-8 ↗
9. R. Drevet, O. Aaboubi and H. Benhayoune: J Solid State Electrochem., 2012, vol. 16, pp. 3069-3077.10.1007/s10008-012-1742-3 ↗
10. H.-T. Chen, M.-C. Wang, K.-M. Chang, S.-H. Wang, W.-Je. Shih and W.-L. Li, Metall. Trans. A, 2014, vol. 45, pp. 2260-2269.10.1007/s11661-013-2115-y ↗
11. H. Wang, N. Eliaz and L. W. Hobbs: Mater. Lett., 2011, vol. 65, pp. 2455-2457.10.1016/j.matlet.2011.05.016 ↗
12. Q. Yuan and T. D. Golden: Thin Solid Films, 2009, vol. 518, pp. 55–60.10.1016/j.tsf.2009.06.029 ↗
13. Y.W. Song, D.Y. Shan and E.H. Han: Mater. Lett., 2008, vol. 62, pp. 3276.10.1016/j.matlet.2008.02.048 ↗
14. S. Fujino, H. Tokunaga, S. Hata, E. Saiz and A. P. Tomsia: J. Mater. Sci., 2005, vol. 40, pp. 2499-2503.10.1007/s10853-005-1982-z ↗
15. F. Bir, H. Khireddine, A. Touati, D. Sidane, S. Yala and H. Oudadesse: Appl. Surf. Sci., 2012, vol. 258, pp. 7021–7030.10.1016/j.apsusc.2012.03.158 ↗
16. H. A. Conrad, M. R. McGuire, T. Zhou, M. I. Coskun and T. D. Golden: Surf. Coat. Technol., 2015, vol. 272, pp. 50–57.10.1016/j.surfcoat.2015.04.025 ↗
17. W.-J. Shih, S.-H. Wang, W.-L. Li, M.-H. Hon and M.-C. Wang: J. Alloys Compd., 2007, vol. 434–435, pp. 693–696.10.1016/j.jallcom.2006.08.225 ↗
18. R.G. Brereton: Chemometrics: Data Analysis for the Laboratory and Chemical Plant, Wiley, Chichester, 2003.10.1002/0470863242 ↗
19. J.A. Cornell: How to Apply Response Surface Methodology, 2nd ed., American Society for Quality Control, US, 1990.
20. E. Yücel, N. Güler and Y. Yücel: J. Alloys Comp., 2014, vol. 589, pp. 207-212.10.1016/j.jallcom.2013.11.067 ↗
21. E. Yücel and Y. Yücel: J Mater Sci-Mater El., 2015, vol. 26, pp. 196-203.10.1007/s10854-014-2383-3 ↗
22. E. Yücel, Y. Yücel and İ. Belenli: J Mater Sci: Mater Electron, 2012, vol. 23, pp. 1284-1292.10.1007/s10854-012-0791-9 ↗
23. Y. Yücel: Fuel Process. Technol., 2012, vol. 99, pp. 97-102.10.1016/j.fuproc.2012.02.008 ↗
24. Y. Yücel: Biocatal. Agric. Biotechnol., 2012, vol.1, pp. 39-44.10.1016/j.bcab.2011.08.009 ↗
25. C. Demir and Y. Yücel: Turk J Chem., 2006, vol. 30, pp. 181-192.
26. M.I. Coşkun, İ. H. Karahan and Y. Yücel: Electrochim Acta, 2014, vol. 150, pp. 46-54.10.1016/j.electacta.2014.10.120 ↗
27. J. Wang, Y. Chao, Q. Wan, Z. Zhu and H. Yu: Acta Biomater., 2009, vol. 5, pp. 1798-1807.10.1016/j.actbio.2009.01.005 ↗
28. R. Drevet, A. Lemelle, V. Untereiner, M. Manfait, G.D. Sockalingum and H. Benhayoune: Appl. Surf. Sci., 2013, vol. 268, pp. 343-348.10.1016/j.apsusc.2012.12.093 ↗
29. Y.Y. Zhang, J. Tao, Y.C. Pang, W. Wang and T. Wang: Trans. Nonferrous Met. SOC. China, 2006, vol. 16, pp. 633-637.10.1016/S1003-6326(06)60112-X ↗
30. D. Gopi, S. Ramya, D. Rajeswari and L. Kavitha: Colloids Surf. B, 2013, vol. 107, pp. 130–136.10.1016/j.colsurfb.2013.01.065 ↗
31. M. Jamesh, S. Kumar and T. S. N. Sankara Narayanan: J. Coat. Technol. Res., 2012, vol. 9 (4), pp. 495–502.10.1007/s11998-011-9382-6 ↗
32. M. Shirkhanzadeh: J Mater Sci-Mater M, 1998, vol. 9, pp. 67-72.10.1023/A:1008838813120 ↗
33. D.J. Blackwood and K.H.W. Seah: Mater Sci Eng C Mater Biol Appl., 2010, vol. 30, pp. 561–565.10.1016/j.msec.2010.02.007 ↗
34. D. Qiu, L. Yang, Y. Yin and A. Wang: Surf Coat Technol., 2011, vol. 205, pp. 3280-3284.10.1016/j.surfcoat.2010.11.049 ↗
35. X. Zhang, Q. Li, L. Li, P. Zhang, Z. Wang and F. Chen: Mater Lett, 2012, vol. 88, pp. 76-78.10.1016/j.matlet.2012.08.011 ↗
36. M.S. Djosic, V. Panic, J. Stojanovic, M. Mitric, and V.B. Miskovic-Stankovic: Colloid Surface A, 2012, vol. 400, pp. 36–43.10.1016/j.colsurfa.2012.02.040 ↗
37. E.A. Abdel-Aal, D. Dietrich, S. Steinhaeuser and B. Wielage: Surf Coat Technol., 2008, vol. 202, pp. 5895–5900.10.1016/j.surfcoat.2008.06.139 ↗
38. Y. Huang, Y. Yana and X. Pang: Ceram. Int., 2013, vol. 39, pp. 245-253.10.1016/j.ceramint.2012.06.017 ↗