Ceramic coatings for a corrosion-resistant nuclear waste container evaluated in simulated ground water at 90 °C
Source abstract
Abstract
Ceramic materials provide an innovative opportunity for corrosion-resistant coatings for nuclear waste containers. Their suitability can be derived from the fully oxidized state for selected metal oxides. Ceramic coatings applied to plain carbon steel substrates by several thermal spray techniques have been exposed to 90 °C simulated ground water (at 10 times typical concentration) for nearly 6 years. Thermal spray processes examined in this work included plasma spray, high-velocity oxy fuel (HVOF), and detonation gun. Some thermal spray coatings have demonstrated superior corrosion protection for the plain carbon steel substrate. In particular, the HVOF and detonation gun thermal spray processes produced coatings with low connected porosity, which limited the growth rate of corrosion products. It was also demonstrated that these coatings resisted spallation of the coating even when an intentional flaw (which allowed for corrosion of the carbon steel substrate underneath the ceramic coating) was placed in the coating. An approach for a theoretical basis for prediction of the corrosion protection provided by ceramic coatings is also presented. The theoretical development includes the effect of the morphology and amount of the porosity within the thermal spray coating and provides a prediction of the exposure time needed to produce a crack in the ceramic coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. R.D. McCright: MRS Bull., 1994, Dec., pp. 39–42.10.1557/S0883769400048685 ↗
2. R.C. Tucker, Jr.: in Science, Technology and Applications, 2nd ed., Rointan F. Bunshah, ed., Noyes Publications, Park Ridge, NJ, 1994, p. 647.
3. R.C. Tucker, Jr.: in Science, Technology and Applications, 2nd ed., Rointan F. Bunshah, ed., Noyes Publications, Park Ridge, NJ, 1994, pp. 617–29.
4. J.C. Farmer and K.R. Wilfinger: Internal Report No. UCRL-ID-131899 Rev. 1, Lawrence Livermore National Laboratory, Livermore, CA, Sept. 1998.
5. H.H. Uhlig and R.W. Revie: Corrosion and Corrosion Control, 3rd ed., Wiley Interscience, New York, NY, 1985, p. 108; Corrosion in the Petrochemical Industry, L. Garverick, ed., ASM INTERNATIONAL, Materials Park, OH, 1994, p. 450.
6. D.R. Kester: Dissolved Gases Other Than CO 2, Chemical Oceanography, 2nd ed., J.P. Riley and G. Skirrow, eds., Academic Press, New York, NY, 1973, vol. 1, p. 498; Metals Handbook, ASM, Materials Park, OH, 1998, vol. 13, CD ROM version.
7. T.K. Sherwood, R.L. Pigford, and C.R. Wilke: Mass Transfer, McGraw-Hill, San Francisco, CA, 1975, pp. 25–26.
8. W.C. Young: Roark’s Formulas for Stress and Strain, 6th ed., McGraw-Hill, San Francisco, CA, 1989, p. 429.
9. D.R. Adkeland: The Science and Engineering of Materials, 3rd ed., PWS Publishing, Boston, MA, 1994, p. 141.
10. P.A. Thornton and V.J. Colangelo: Fundamentals of Engineering Materials, Prentice-Hall, Englewood Cliffs, NJ, 1985.
11. M.K. Ferber and S.D. Brown: in Fracture Mechanics of Ceramics, vol. 6, Measurements, Transformations, and High-Temperature Fracture, R.C. Bradt, A.G. Evans, D.P.H. Hasselman, and F.F. Lange, eds., Plenum Press, New York, NY, 1983, pp. 523–44.
12. A. Kulkarni, A. Vaidya, A. Goland, S. Sampath, and H. Herman: Mater. Eng. A, 2003, vol. A359, pp. 100–11.10.1016/S0921-5093(03)00342-3 ↗
13. J.D. Bernal: Proc. R. Soc. (London), 1964, vol. 280A, pp. 299–323.
14. F.A.L. Dullen, Porous Media: Fluid Transport and Pore Structure, 2nd ed., Academic Press, New York, NY, 1992.