journal article·2005-11

Structural disordering in WC thin films induced by SiC additions

James E. Krzanowski, Jonathan Wormwood

Publisher page

Abstract

An investigation has been conducted into the structural disordering in WC thin films induced by SiC additions. The effect of this disordering on film hardness is also reported. In this investigation, WC-SiC films with a SiC content varying from 11.6 to 38.2 pct were deposited using dual rf magnetron sputtering. The relative Si and W content in the films was determined using electron microprobe analysis. Analysis by X-ray diffraction (XRD) confirmed that, within this compositional range, the film structure transformed from crystalline to amorphous. The XRD patterns showed that the crystalline films consisted primarily of WC1−x, along with a small amount of W2C; no clear evidence for a separate crystalline SiC phase was found. High-resolution transmission electron microscopy (HRTEM) studies showed that with a lower Si content, the films consisted of crystallites 3 to 5 nm in diameter embedded in an amorphous phase. As the Si content increased, the amorphous phase content increased, both as interlayers between crystallites and as particles within the crystallites. Further Si increases led to a structure consisting of a high density of interconnected amorphous particles within well-defined semicrystalline domains separated by a thin amorphous interlayer. At the highest Si content, a clear two-phase morphology evolved, consisting of two nearly amorphous but distinct phases, which suggests a fine-scale partial-phase separation between the WC and the SiC. At the atomic level, it was found that Si decreased the coherence length within the crystalline phase, resulting in a structure of mixed crystalline/highly disordered phases scaled in the range of 2 to 4 nm. Despite the significant alterations in the film structures due to SiC additions, the hardness and modulus of the films were essentially constant within the compositional range of the transition, although films with SiC contents of less than ∼11 pct had significantly lower hardness levels. It is proposed that the effects of Si on hardness can be explained in terms of competition between the percolation threshold and the amorphization-inducing effect of Si.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. R.A. Roy and R. Messier: J. Vac. Sci. Technol., 1984, vol. A2, pp. 312–15.10.1116/1.572590 ↗
2. R. Messier, A.P. Giri, and R.A. Roy: J. Vac. Sci. Technol., 1984, vol. A2, pp. 500–03.10.1116/1.572604 ↗
3. S. Veprek, S. Reiprich, and Li Shizhi: Appl. Phys. Lett., 1995, vol. 66, pp. 2640–42.10.1063/1.113110 ↗
4. S. Veprek: Thin Solid Films, 1998, vol. 317, pp. 449–54.10.1016/S0040-6090(97)00665-2 ↗
5. S. Veprek, P. Nesladek, A. Niederhofer, F. Glatz, M. Jilek, and M. Sima: Surf. Coating Technol., 1998, vols. 108–109, pp. 138–47.10.1016/S0257-8972(98)00618-5 ↗
6. S. Veprek, A. Niederhofer, K. Moto, T. Bolom, H.D. Mannling, P. Nesladek, G. Dollinger, and A. Bergmaier: Surf. Coating Technol., 2000, vols. 133–134, pp. 152–59.10.1016/S0257-8972(00)00957-9 ↗
7. L. Rebouta, C.J. Tavares, R. Aimo, Z. Wang, K. Pischow, E. Alves, T.C. Rojas, and J.A. Odriozola: Surf. Coat. Technol., 2000, vol. 133–134, pp. 234–39.10.1016/S0257-8972(00)00934-8 ↗
8. F. Vaz, L. Rebouta, P. Goudeau, J. Pacaud, H. Garem, J.P. Riviere, A. Cavaleiro, and E. Alves: Surf. Coating Technol., 2000, vols. 133–134, pp. 307–13.10.1016/S0257-8972(00)00947-6 ↗
9. P.J. Martin and A. Bendavid: Surf. Coating Technol., 2003, vols. 163–164, pp. 245–50.10.1016/S0257-8972(02)00491-7 ↗
10. X.D. Zhang, W.J. Meng, W. Wang, L.E. Rehn, P.M. Baldo, and R.D. Evans: Surf. Coating Technol., 2004, vols. 177–178, pp. 325–33.10.1016/j.surfcoat.2003.09.043 ↗
11. W.J. Meng, X.D. Zhang, B. Shi, R.C. Tittsworth, L.E. Rehn, and P.M. Baldo: J. Mater. Res., 2002, vol. 17, pp. 2628–32.10.1557/JMR.2002.0381 ↗
12. J.E. Krzanowski and S.H. Koutzaki: J. Am. Cer. Soc., 2001, vol. 84, pp. 672–74.10.1111/j.1151-2916.2001.tb00724.x ↗
13. S.H. Koutzaki, J.E. Krzanowski, and J.J. Nainaparampil: J. Vac. Sci. Technol., 2001, vol. A19, pp. 1912–18.10.1116/1.1379322 ↗
14. A.R. Phani, J.E. Krzanowski, and J.J. Nainaparampil: J. Vac. Sci. Technol., 2001, vol. A19, pp. 2252–58.10.1116/1.1382876 ↗
15. W.J. Meng, R.C. Tittsworth, and L.E. Rehn: Thin Solid Films, 2000, vols. 377–378, pp. 222–32.10.1016/S0040-6090(00)01300-6 ↗
16. A.A. Voevodin and J.S. Zabinski: J. Mater. Sci., 1998, vol. 33, pp. 319–27.10.1023/A:1004307426887 ↗
17. J.L. Endrino and J.E. Krzanowski: J. Mater. Res., 2002, vol. 17, pp. 3163–67.10.1557/JMR.2002.0457 ↗
18. J.T. Armstrong: Microbeam Analysis, 1995, vol. 4, pp. 177–200.
19. PDF-JCPDS Data Cards, International Center of Diffraction Data, Swarthmore, PA, 1988.
20. J.E. Krzanowski and J.L. Endrino: Mater. Lett., 2004, vols. 58/27–58/28. pp. 3437–40.10.1016/j.matlet.2004.04.036 ↗
21. J.W. Cahn: Trans. AIME, 1968, vol. 142, pp. 166–80.
22. D.B. Williams and C.B. Carter: Transmission Electron Microscopy, Vol. 3: Imaging, Plenum Press, New York, NY, 1996, pp. 357–58.10.1007/978-1-4757-2519-3 ↗
23. J. Patscheider, T. Zehnder, and M. Diserens, Surf. Coating Technol., 2001, vols. 146–147, pp. 201–08.10.1016/S0257-8972(01)01389-5 ↗