Prediction of bending limits in friction-stir-processed thick plate aluminum
Source abstract
Abstract
Friction-stir processing (FSP) was used to modify surface microstructures, to enhance the bending of thick-plate 6061-T6 and 7050-T7451 aluminum alloys. Plates were bent at room temperature into a V-shaped die, to various angles. Bending performance in the friction-stir-processed plates was significantly better than that in the base plates, where processing caused localized softening of the pretensile surface of the plate. A finite-element model of the plate-bending process was developed, to predict the bending limits of both the unprocessed base plates and of the friction-stir-processed plates. For the friction-stir-processed plates, the model employed a mesh divided into two or more zones; one zone was for unprocessed base material and other zones were for the processed material or for material that was affected by the heat of processing. The model used both the von Mises and the Latham and Cockroft criteria to predict bending limits. The bending-limit predictions were reasonably accurate, provided the gradient in true stress-strain behavior through the plate thickness was well characterized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. S.P. Lynch, D.P. Edwards, A. Majumdar, S. Moutsos, and M.W. Mahoney: Mater. Sci. Forum, 2003, vols. 426–432, pp. 2903–08.10.4028/www.scientific.net/MSF.426-432.2903 ↗
2. M. Mahoney, A.J. Barnes, W.H. Bingel, and C. Fuller: Mater. Sci. Forum, 2004, vol. 447–448, pp. 505–12.10.4028/www.scientific.net/MSF.447-448.505 ↗
3. M.W. Mahoney, W.H. Bingel, S.R. Sharma, and R.S. Mishra: Mater. Sci. Forum, 2003, vols. 426–432, pp. 2843–48.10.4028/www.scientific.net/MSF.426-432.2843 ↗
4. Z.Y. Ma, R. Mishra, and M. Mahoney: Scripta Mater., 2004, vol. 50 (7), pp. 931–35.10.1016/j.scriptamat.2004.01.012 ↗
5. C. Fuller, M. Mahoney, and W. Bingel: Proc. 4th Int. Symp. Friction Stir Welding, Park City, UT, May 2003, TWI Ltd., Cambridge, United Kingdom, 2003.
6. M. Mahoney, R. Mishra, T. Nelson, J. Flintoff, R. Islamgaliev, and Y. Hovansky: Friction Stir Welding and Processing, TMS, Warrendale, PA, 2001, pp. 183–94.
7. Z.Y. Ma, R.S. Mishra, M.W. Mahoney, and R. Grimes: Mater. Sci. Eng., 2003, vol. A351, p. 148.10.1016/S0921-5093(02)00824-9 ↗
8. C. Fuller, M. Mahoney, and W. Bingel: Proc. 5th Int. Symp. on Friction Stir Welding, Metz, France, Sept. 2004, TWI Ltd., Cambridge, United Kingdom, 2004.
9. Z.Y Ma, S.R. Sharma, R.S. Mishra, and M.W. Mahoney: Mater. Sci. Forum, 2003, vols. 426–432, pp. 2891–96.10.4028/www.scientific.net/MSF.426-432.2891 ↗
10. M. Mahoney, C.B. Fuller, and W.H. Bingel: Rockwell Scientific Co., Thousand Oaks, CA, unpublished research, 2002.
11. Z. Feng, J.E. Gould, and T.J. Lienert: Hot Deformation of Aluminum Alloys II, 1998, pp. 149–58.
12. Y.J. Chao, X. Qi, and W. Tang: J. Manufacturing Sci. Eng., 2003, vol. 125 (1), pp. 138–45.10.1115/1.1537741 ↗
13. M. Song and R. Kovacevic: Int. J. Mach. Tools Manufacture, 2003, vol. 43, pp. 605–15.10.1016/S0890-6955(03)00022-1 ↗
14. C.M. Chen and R. Kovacevic: Int. J. Mach. Tools Manufacture, 2003, vol. 43, pp. 1319–26.10.1016/S0890-6955(03)00158-5 ↗
15. S. Xu, X. Deng, A.P. Reynolds, and T.U. Seidel: Sci. Technol. Welding Joining, 2001, vol. 6, pp. 191–93.10.1179/136217101101538640 ↗
16. P.A. Colegrove and H.R. Shercliff: Sci. Technol. Welding Joining. 2003, vol. 8, pp. 360–68.10.1179/136217103225005534 ↗
17. A. Askari, S. Silling, B. London, and M. Mahoney: Modeling and Analysis of Friction Stir Welding Processes, TMS, Warrendale, PA, 2001.
18. M. Miles, M. Mahoney, T. Nelson, and R. Mishra: Friction Stir Welding and Processing II, TMS, Warrendale, PA, 2003, pp. 253–58.
19. FORGE2, Transvalor SA, Sophia-Antipolis, France.
20. C.D. Donne, G. Biallas, T. Ghinidini, and G. Raimbeaux: Proc. 2nd Int. Symp. on Friction Stir Welding, Gothenburg, Sweden, June 26–28, 2000.
21. M.A. Sutton, A.P. Reynolds, D.Q. Wang, and C.R. Hubbard: J. Eng. Mater. Technol., 2002, vol. 124 (4), pp. 215–21.10.1115/1.1429639 ↗
22. M.G. Cockroft and D.J. Latham: J. Inst. Met., 1968, vol. 96, pp. 33–39.
23. D.A. Barlow: J. Mech. Phys. Solids, 1954, vol. 2, pp. 259–64.10.1016/0022-5096(54)90016-2 ↗