journal article·2014-09

Modification in the Microstructure of Mod. 9Cr-1Mo Ferritic Martensitic Steel Exposed to Sodium

T. N. Prasanthi, Cheruvathur Sudha, V. Thomas Paul, N. Sivai Bharasi, S. Saroja, M. Vijayalakshmi

Publisher page

Abstract

Mod. 9Cr-1Mo is used as the structural material in the steam generator circuit of liquid metal-cooled fast breeder reactors. Microstructural modifications on the surface of this steel are investigated after exposing to flowing sodium at a temperature of 798 K (525 °C) for 16000 hours. Sodium exposure results in the carburization of the ferritic steel up to a depth of ~218 µm from the surface. Electron microprobe analysis revealed the existence of two separate zones with appreciable difference in microchemistry within the carburized layer. Differences in the type, morphology, volume fraction, and microchemistry of the carbides present in the two zones are investigated using analytical transmission electron microscopy. Formation of separate zones within the carburized layer is understood as a combined effect of leaching, diffusion of the alloying elements, and thermal aging. Chromium concentration on the surface in the α-phase suggested possible degradation in the corrosion resistance of the steel. Further, concentration-dependent diffusivities for carbon are determined in the base material and carburized zones using Hall’s and den Broeder’s methods, respectively. These are given as inputs for simulating the concentration profiles for carbon using numerical computation technique based on finite difference method. Predicted thickness of the carburized zone agrees reasonably well with that of experiment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. B. Raj, S.L. Mannan, P.R. Vasudeva Rao and M.D. Mathew: Sadhana, 2002, vol. 27(5), pp. 527-58.10.1007/BF02703293 ↗
2. N. Sivai Bharasi, K. Thyagarajan, H. Shaikh, M. Radhika, A.K. Balamurugan, S. Venugopal, A. Moitra, S. Kalavathy, S. Chandramouli, A.K. Tyagi, R.K. Dayal and K.K. Rajan: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 561–71.10.1007/s11661-011-0884-8 ↗
3. H. Shaikh, N. Sivai Bharasi, S. Rajendran Pillai, and H.S. Khatak: Proc. Materials R & D for PFBR, IGCAR, Kalpakkam, 2003, pp. 169–78.
4. K. Natesan, M. Li, O.K. Chopra and S. Majumdar: J. Nucl. Mater., 2009, vol. 392, pp. 243-48.10.1016/j.jnucmat.2009.03.039 ↗
5. O.K. Chopra: J. Nucl. Mater., 1983, vol. 115, pp. 223-38.10.1016/0022-3115(83)90314-8 ↗
6. R.L. Klueh: J. Nucl. Mater., 1981, vol. 96, pp. 187-95.10.1016/0022-3115(81)90232-4 ↗
7. R. Kannan, R. Sandhya, V. Ganesan, M. Valsan and K. Bhanu Sankara Rao: J. Nucl. Mater., 2009, vol. 384, pp. 286-91.10.1016/j.jnucmat.2008.11.036 ↗
8. D.L. Lopez, A.W. Moreno and L. Martinez: Corros. Sci., 1993, vol. 35(5-8), pp. 1151-58.10.1016/0010-938X(93)90335-E ↗
9. H.U. Borgstedt: J. Nucl. Mater., 2003, vol. 317, pp. 160-66.10.1016/S0022-3115(03)00073-4 ↗
10. R.B. Snyder, K. Natesan and T.F. Kassner: J. Nucl. Mater., 1974, vol. 50, pp. 259-74.10.1016/0022-3115(74)90096-8 ↗
11. N. Sivai Bharasi, K. Thyagarajan, H. Shaikh, A.K. Balamurugan, S. Bera, S. Kalavathy, K. Gurumurthy, A.K. Tyagi, R.K. Dayal, K.K. Rajan and H.S. Khatak: J. Nucl. Mater., 2008, vol. 377, pp. 378-84.10.1016/j.jnucmat.2008.01.032 ↗
12. C. Sudha, N. Sivai Bharasi, R. Anand, H. Shaikh, R.K. Dayal and M. Vijayalakshmi: J. Nucl. Mater., 2010, vol. 402, pp. 186-95.10.1016/j.jnucmat.2010.05.023 ↗
13. A. Saltelli, O.K. Chopra and K. Natesan: J. Nucl. Mater., 1982, vol. 110, pp. 1-10.10.1016/0022-3115(82)90401-9 ↗
14. T. Suzuki and I. Mutoh: J. Nucl. Mater., 1987, vol. 149, pp. 41-50.10.1016/0022-3115(87)90496-X ↗
15. K. Matsumoto, Y. Ohta, T. Kataoka, S. Yagi and K. Suzuki: J. Nucl. Sci. Technol., 1976, vol. 13(4), pp. 199-214.10.1080/18811248.1976.9734012 ↗
16. R.L. Klueh and J.M. Leitnaker: Metall. Trans. A, 1975, vol. 6A, pp. 2089-93.10.1007/BF03161835 ↗
17. K. Natesan and T.F. Kassner: J. Nucl. Mater., 1970, vol. 37, pp. 223-35.10.1016/0022-3115(70)90087-5 ↗
18. K. Natesan, O.K. Chopra and T.F. Kassner: Nucl. Technol., 1976, vol. 28, pp. 441-51.
19. J.L. Krankota and J.S. Armijo: Nucl. Technol., 1974, vol. 24, pp. 225-33.10.13182/NT74-A31477 ↗
20. D. Farkas and J. Delgado: Scripta Metall., 1983, vol. 17, pp. 261-64.10.1016/0036-9748(83)90153-9 ↗
21. K. Bongartz, D.F. Lupton and H. Schuster: Metall. Trans. A, 1980, vol. 11A, pp. 1883-93.10.1007/BF02655105 ↗
22. K. Bongartz, W.J. Quadakkers, R. Schulten and H. Nickel: Metall. Trans. A, 1989, vol. 20A, pp. 1021-28.10.1007/BF02650138 ↗
23. A. Engstrom, L. Hoglund and J. Agren: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1127-34.10.1007/BF02652288 ↗
24. S. Rajan Babu, P.R. Reshmi and T. Gnanasekaran: Electrochim. Acta, 2012, vol. 59, pp. 522-30.10.1016/j.electacta.2011.11.008 ↗
25. S. Rajendran Pillai and C.K. Mathews: J. Nucl. Mater., 1986, vol. 137, pp. 107-14.10.1016/0022-3115(86)90039-5 ↗
26. C. Sudha, R. Anand, S. Saroja and M. Vijayalakshmi: Trans. IIM, 2010, vol. 63(4), pp. 739-44.
27. G. Cliff and G.W. Lorimer: Quantitative Microanalysis with High Spatial Resolution, The Metal Society, London, 1981.
28. F.J.A. den Broeder: Scripta Metall., 1969, vol. 3, pp. 321-26.10.1016/0036-9748(69)90296-8 ↗
29. S.K. Kailasam, J.C. Lacombe and M.E. Glicksman: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 2605-10.10.1007/s11661-999-0300-9 ↗
30. Lewis D. Hall: J. Chem. Phy., 1953, vol. 21, pp. 87–89.10.1063/1.1698631 ↗
31. R. Anand, C. Sudha, T. Karthikeyan, A.L.E. Terrance, S. Saroja and M. Vijayalakshmi: J. Mater. Sci., 2009, vol. 44, pp. 257-65.10.1007/s10853-008-3052-9 ↗
32. J.I. Goldstein and A.E. Moren: Metall. Trans. A, 1978, vol. 9(11), pp. 1515-25.10.1007/BF02661934 ↗
33. F.B. Litton and A.E. Morris: J. Less Common Met., 1970, vol. 22, pp. 71-80.10.1016/0022-5088(70)90177-3 ↗
34. J. Kucera, K. Stransky and J. Dojiva: Mater. Sci. Eng. A, 1990, vol. 125, pp. 75-82.10.1016/0921-5093(90)90255-2 ↗
35. H. Wada: Metall. Trans. A, 1986, vol. 16A, pp. 1479–90.10.1007/BF02658680 ↗
36. V. Thomas Paul, S. Saroja and M. Vijayalakshmi: J. Nucl. Mater., 2008, vol. 378, pp. 273-81.10.1016/j.jnucmat.2008.06.033 ↗
37. C. Sudha, V. Thomas Paul, A.L.E. Terrance, S. Saroja and M. Vijayalakshmi: Weld. J., 2006, vol. 85(3), pp. 71s-80s.
38. K. Kaneko, S. Matsumura, A. Sadakata, K. Fujita, W.J. Moon, S. Ozaki, N. Nishimura and Y. Tomokiyo: Mater. Sci. Eng. A, 2004, vol. 374, pp. 82-89.10.1016/j.msea.2003.12.065 ↗
39. S. Saroja, P. Parameswaran, M. Vijayalakshmi and V.S. Raghunathan: Acta Metall. Mater., 1995, vol. 43(8), pp. 2985-3000.10.1016/0956-7151(95)00022-N ↗
40. O.K. Chopra, K. Natesan and T.F. Kassner: J. Nucl. Mater., 1981, vol. 96, pp. 269-84.10.1016/0022-3115(81)90571-7 ↗
41. C.K. Mathews, T. Gnanasekaran and S. Rajendran Pillai: Trans. Indian Inst. Met., 1987, vol. 40(1), pp. 89-100.
42. A. Vyrostkova, A. Kroupa, J. Janovec and M. Svoboda: Acta Metall., 1998, vol. 46(1), pp. 31-38.
43. P.L.F. Rademakers and B.H. Kolster: J. Nucl. Mater., 1981, vol. 97, pp. 309-18.10.1016/0022-3115(81)90479-7 ↗
44. T. Furukawa and E. Yashida: Comprehensive Nuclear Materials, R.J.M. Konings, ed., Elsevier, Oxford, 2012, pp. 327–41.10.1016/B978-0-08-056033-5.00101-4 ↗
45. W.Z. Guang, K. Rahka, P. Nenonen and C. Laird: Acta Metall., 1985, vol. 33(12), pp. 2129-41.10.1016/0001-6160(85)90174-9 ↗
46. R. Viswanathan and A. Joshi: Metall. Trans. A, 1975, vol. 6A, pp. 2289-97.10.1007/BF02818656 ↗
47. B.A. Senior: Mater. Sci. Engg. A, 1988, vol. A103, pp. 263-71.10.1016/0025-5416(88)90516-2 ↗