journal article·2007-12

Advances in X-ray Computed Tomography Diagnostics of Ballistic Impact Damage

Joseph M. Wells, Rebecca M. Brannon

Publisher page

Abstract

With the relatively recent introduction of quantitative and volumetric X-ray computed tomography (XCT) applied to ballistic impact damage diagnostics, significant inroads have been made in expanding our knowledge base of the morphological variants of physical impact damage. Yet, the current state of the art in computational and simulation modeling of terminal ballistic performance remains predominantly focused on the penetration phenomenon, without detailed consideration of the physical characteristics of actual impact damage. Similarly, armor ceramic material improvements appear more focused on penetration resistance than on improved intrinsic damage tolerance and damage resistance. Basically, these approaches minimize our understanding of the potential influence that impact damage may play in the mitigation or prevention of ballistic penetration. Examples of current capabilities of XCT characterization, quantification, and visualization of complex impact damage variants are demonstrated and discussed for impacted ceramic and metallic terminal ballistic target materials. Potential benefits of incorporating such impact damage diagnostics in future ballistic computational modeling are also briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced X-ray and CT Imaging · Orthopedic Infections and Treatments · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. D.M. Stepp: in Ceramic Armor Materials by Design, J.W. McCauley, A.M. Rajendran, W.A. Gooch, Jr., S.J. Bless, S. Wax, A. Crowson, K.V. Logan, and M. Normandia, eds., Ceram. Trans., ACERS, 735 Ceramic Place, Westerville, Ohio 43081, www.ceramics.org, 2002, vol. 134, pp. 421–28
2. A.M. Rajendran: in Ceramic Armor Materials by Design, J.W. McCauley, A.M. Rajendran, W.A. Gooch, Jr., S.J. Bless, S. Wax, A. Crowson, K.V. Logan, and M. Normandia, eds., Ceram. Trans., ACERS, 735 Ceramic Place, Westerville, Ohio 43081, www.ceramics.org, 2002, vol. 134, pp. 281–97
3. D.W. Templeton, T.J. Holmquist, H.W. Meyer, Jr., D.J. Grove, and B. Leavy: in Ceramic Armor Materials by Design, J.W. McCauley, A.M. Rajendran, W.A. Gooch, Jr., S.J. Bless, S. Wax, A. Crowson, K.V. Logan, and M. Normandia, eds., Ceram. Trans., ACERS, 735 Ceramic Place, Westerville, Ohio 43081, www.ceramics.org, 2002, vol. 134, pp. 299–308
4. J.M. Winter, W.J. Bruchey, J.M. Wells, and N.L. Rupert: Proc. 21st Int. Symp. on Ballistics, Adelaide, Australia, 2004, ADPA, Defence Science and Technology organization, ISBN 0-9752028-0-4, 2004, vol. 1, pp. 111–17
5. C.E. Anderson, Jr.: Proc. 30th Int. Conf. Advanced Ceramics & Composites—Advances in Ceramic Armor, ACERS, 735 Ceramic Place, Westerville, Ohio 43081, www.ceramics.org, 2006, vol. 27 (7), in press
6. J.M. Wells: Proc. 22nd Int. Symp. Ballistics, Vancouver, ADPA, DES Tech Publications, Inc., Lancaster, PA, ISBN 1-932078-52-5, 2005, vol. 1, pp. 793–800
7. H.T. Miller, W.H. Green, N.L. Rupert, and J.M. Wells: Proc. 21st Int. Symp. Ballistics, Adelaide, Australia, 2004, ADPA, Defence Science and Technology organization, ISBN 0-9752028-0-4, 2004, vol. 1, pp. 153–59
8. J.M. Wells: Proc. 30th Int. Conf. Advanced Ceramics & Composites—Advances in Ceramic Armor, 2006, vol. 27 (7), paper no. 6–17
9. J.M. Wells, W.H. Green, N.L. Rupert, J.R. Wheeler, S.J. Cimpoeru, and A.V. Zibarov: Proc. 21st Int. Symp. Ballistics, DSTO, Adelaide, Australia, ADPA, Defence Science and Technology organization, ISBN 0-9752028-0-4, 2004, vol. 2, pp. 125–31
10. Volume Graphics StudioMax v1.2, www. volumegraphics.com
11. N.K. Bourne, W.H. Green, D.P. Dandekar: Proc. R. Soc. A, 2006, vol. 462, pp. 3197–321210.1098/rspa.2006.1713 ↗
12. J.M. Wells, N.L. Rupert, W.J. Bruchey, and D.A. Shockey: Proc. 23rd Int. Symp. Ballistics, Tarragona, Spain, ADPA, Graficas Couche, S.I., c/Ceramica.\,64 – 28038 Madrid, Spain, ISBN 978-84-7493—379-6, 2007, vol. 2, in press
13. J.M. Wells and D.M. Stepp: A Workshop on the Role of Impact Damage on the Performance of Armor Ceramics, ARO Report, 2006, in press
14. J.M. Wells: Proc. 30th Int. Conf. Advanced Ceramics & Composites—Advances in Ceramic Armor, 2006, vol. 27 (7), paper no. 6–19
15. J.M. Wells: Proc. 22nd Int. Symp. Ballistics, Vancouver, ADPA, DES Tech Publications, Inc., Lancaster, PA , ISBN 1-932078-52-5, 2005, vol. 2, pp. 1223–30
16. J.M. Wells: Proc. 31st Int. Conf. Advanced Ceramics & Composites—Advances in Ceramic Armor, ACERS, 735 Ceramic Place, Westerville, Ohio 43081, www.ceramics.org, 2007, in press
17. J.M. Wells: Proc. 3rd Annual Computational Ballistics Conf., New Forest, United Kingdom, June 6–9, 2007, in press
18. J.M. Wells, N.L. Rupert, and W.H. Green: Proc. 25th Army Science Conf., Orlando, FL, Nov. 27–30, 2006
19. J.M. Wells, N.L. Rupert, and W.H. Green: in Ceramic Armor Materials by Design, J.W. McCauley, A.M. Rajendran, W.A. Gooch, Jr., S.J. Bless, S. Wax, A. Crowson, K.V. Logan, and M. Normandia, eds., Ceram. Trans., ACERS, 735 Ceramic Place, Westerville, Ohio 43081, www.ceramics.org, 2002, vol. 134, pp. 441–48
20. R.M. Brannon: Proc. 9th ASCE Specialty Conf. Probabilistic Mechanics and Structural Reliability, PMC2004, July 26–28, 2004, Albuquerque, New Mexico, 2005
21. R.M. Brannon and O.E. Strack: “The Influence of Micro-Heterogeneity and Failure Progression Variability on Mesh-Dependency of Conventional Damage Models,” Draft Sandia Report, Sandia National Laboratory, 2005