Atomic force microscopy studies of fracture surfaces of composition B energetic materials
Source abstract
Abstract
The characteristics of trinitrotoluene (TNT) crystals in composition B have been studied using atomic force microscopy (AFM). The size of TNT crystals has been examined by analyzing the surface structure that is exhibited after mechanical failure of the composition B. The mechanical failure occurs when the material is subjected to high acceleration (high g) in an ultracentrifuge and the shear or tensile strength is exceeded. The AFM examination of the topography of the composition B fracture surface reveals fracture across columnar grains of the TNT. The width of the columnar TNT grains ranges in size from ∼1 to ∼2 µm. Their height ranges in size from ∼50 to ∼300 nm. Flat TNT columns alternate with TNT columns containing river patterns that identify the direction of crack growth. Steps in the river patterns are a few nanometers in depth. The TNT constituent fracture surface morphology is shown to occur on such fine scale, beginning from adjacent columnar crystals only 1 to 2 µm in width and including river marking step heights of only a few nanometers, that AFM-type resolution is required even to begin to make clear what has happened.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Ion-surface interactions and analysis · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Y.D. Lanzerotti, J. Autera, J. Pinto, and J. Sharma: High Pressure Science and Technology—1993, American Institute of Physics Conf. Proc., AIP, Woodbury, NY, 1994, vol. 309, pp. 489–91.
2. Y.D. Lanzerotti, J. Autera, L. Borne, and J. Sharma: Decomposition, Combustion, and Detonation Chemistry of Energetic Materials, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1996, vol. 418, pp. 73–78.
3. J. Sharma, C.S. Coffey, R.W. Armstrong, W.L. Elban, and Y.D. Lanzerotti: Shock Compression of Condensed Matter—1999, American Institute of Physics Conf. Proc., 2000, vol. 505, pp. 719–22.
4. J. Sharma, C.S. Coffey, R.W. Armstrong, W.L. Elban, and Y.D. Lanzerotti: Chem. Phys. (Russian), 2001, vol. 20 (8), pp. 50–54.
5. Y.D. Lanzerotti and J. Sharma: Appl. Phys. Lett., 1981, vol. 39, p. 455.10.1063/1.92737 ↗
6. Y.D. Lanzerotti and J. Sharma: Grain-Size and Mechanical Properties—Fundamentals and Applications, Materials Research Society Symposia Proceedings, R.W. Armstrong et al., eds., Materials Research Society, Pittsburgh, PA, 1995, vol. 362, pp. 131–34.
7. Y.D. Lanzerotti and J. Sharma: Shock Compression of Condensed Matter—1997, American Institute of Physics Conf. Proc., AIP, Melville, NY, 1998, vol. 429, pp. 595–97.
8. Y.D. Lanzerotti and J. Sharma: in Shock Compression of Condensed Matter—2001, N.N. Thadhani et al., American Institute of Physics Conf. Proc., AIP, Melville, NY, 2002, vol. 620, pp. 853–55.
9. Y.D. Lanzerotti, J. Pinto, and A. Wolfe: Proc. 9th Symp. (Int. on Detonation), Office of the Chief of Naval Research, Arlington, VA, 1989, pp. 918–24.
10. Y.D. Lanzerotti, J. Pinto, A. Wolfe, and D.J. Thomson: Proc. 10th Int. Detonation Symp., Office of Naval Research, Arlington, VA, 1993, pp. 190–98.
11. Y.D. Lanzerotti: Atomic Force Microscopy/Scanning Tunneling Microscopy Conf. Proc., Plenum Press, New York, NY, 1995, pp. 127–36.
12. Y.D. Lanzerotti, L.V. Meisel, M.A. Johnson, A. Wolfe, and D.J. Thomson: Atomic Resolution Microscopy of Surfaces and Interfaces, Materials Research Society Symposia Proceedings, Materials Research Society, Pittsburgh, PA, 1997, vol. 466, pp. 179–84.
13. L.V. Meisel, R.D. Scanlon, M.A. Johnson, and Y.D. Lanzerotti: Shock Compression of Condensed Matter—1999, American Institute of Physics Conf. Proc., AIP, Melville, NY, 2000, vol. 505, pp. 727–30.
14. L.V. Meisel, R.D. Scanlon, M.A. Johnson, and Y.D. Lanzerotti: Multiscale Phenomena in Materials—Experiments and Modeling, Materials Research Society Symposia Proceedings, 2000, vol. 578, pp. 363–67.
15. D.L. Smith and R.W. Thorpe: J. Mater. Sci., 1973, vol. 8, pp. 757–59.10.1007/BF00561228 ↗
16. B.M. Dobratz and P.C. Crawford: LINL Explosives Handbook, Properties of Chemical Explosives and Explosive Simulants, UCRL-52997 Change 2, Jan. 31, 1985, Lawrence Livermore National Laboratory, Livermore, CA, pp. 19–143.
17. B.M. Dobratz and P.C. Crawford: LLNL Explosives Handbook, Properties of Chemical Explosives and Explosive Simulants, UCRL1-52997 Change 2, Jan. 31, 1985, Lawrence Livermore National Laboratory, Livermore, CA, pp. 19–131.
18. Basil T. Fedoroff and Oliver E. Sheffield: Encyclopedia of Explosives and Related Items, PATR 2700, Picatinny Arsenal, Dover, NJ, 1966, vol. 3, p. 615.
19. W.O. Williamson: J. Appl. Chem., 1958, vol. 8, pp. 646–51.10.1002/jctb.5010081004 ↗
20. Derek Hull: Fractography: Observing, Measuring and Interpreting Fracture Surface Topography, Cambridge University Press, Cambridge, UK, 1999, p. 93.
21. G.R. Miller and A.N. Garroway: Cambridge, UK, Report No. NRL/MR/6120-01-8585, Naval Research Laboratory, Washington, DC, 2001, pp. 10–16.
22. H.G. Gallagher, K.J. Roberts, J.N. Sherwood, and L.A. Smith: J. Mater. Chem. 1997, vol. 7, p. 119.10.1039/a603983i ↗
23. H.G. Gallagher, R.M. Vrcelj, and J.N. Sherwood: J. Cryst. Growth, 2003, vol. 250, p. 486.10.1016/S0022-0248(02)02394-1 ↗
24. M.C. Chick, W. Connick, and B.W. Thorpe: J. Cryst. Growth, 1970, vol. 7, pp. 317–25.10.1016/0022-0248(70)90057-6 ↗
25. R.G. Seidensticker and D.R. Hamilton: J. Appl. Phys., 1963, vol. 34, pp. 3113–19.10.1063/1.1729130 ↗
26. J. Sharma, R.W. Armstrong, W.L. Elban, C.S. Coffey, and H.W. Sandusky: Appl. Phys. Lett., 2001, vol. 78, pp. 457–59.10.1063/1.1342046 ↗