journal article·2010-06Open access

Microstructure and Wear Behavior of Laser-Aided Direct Metal Deposited Co-285 and Co-285 + WC Coatings

G.F. Sun, C.S. Liu, L.J. Song, J. Mazumder

Abstract

The laser-aided direct metal deposition technique was used to form Co-285 superalloy (A) and Co-285 + 30 wt pct WC (B) wear-resistant coatings on 1018 mild steel. Microstructure, element distribution, phases, microhardness distribution, and wear properties of the two coatings were investigated using scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) spectrometry, scanning transmission electron microscopy (TEM), X-ray diffractometry (XRD), microhardness testing, and wear testing. Results indicate that both of the coatings had dense structures, as well as a metallurgical bonding with the substrate. In addition, coating B had microcracks and randomly distributed undissolved WC particles in it. Coating A was composed of α -Co dendrites, Co 3 W precipitates, and eutectics, while coating B was composed of undissolved WC, Co-rich dendrites, eutectics, and the W-rich third phases with various shapes. Crack behavior in coating B was also discussed. The average microhardness of the matrix in coating B was 751 HV 0.5 , which was almost 1.8 times that of coating A (420 HV 0.5 ). Wear results indicate that the wear resistance of coating B was improved by 6.8 times compared with that of coating A. The improvement in wear resistance is believed to be partially due to the undissolved WC and the formation of large numbers of carbides in the matrix working as wear-resistant phases and partially due to the good bonding between the hard phases and the tough matrix.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Y. Fujii and K. Maeda: Wear, 2002, vol. 252, pp. 787–98.10.1016/S0043-1648(02)00033-9 ↗
2. O.P. Datsyshyn and M.M. Kopylets: Mater. Sci., 2003, vol. 39, pp. 765–79.10.1023/B:MASC.0000031641.94766.78 ↗
3. W.H. Jiang, H.R. Guan, and Z.Q. Hu: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2251–54.10.1007/s11661-999-0038-4 ↗
4. V. Kuzucu, M. Ceylan, H. Çelik, and I. Aksoy: J. Mater. Process. Technol., 1998, vol. 74, pp. 137–41.10.1016/S0924-0136(97)00261-6 ↗
5. J.D. Majumder, B.R. Chandra, B.L. Mordike, R. Galun, and I. Manna: Surf. Coat. Technol., 2004, vol. 179, pp. 297–305.10.1016/S0257-8972(03)00816-8 ↗
6. J.D. Majumder, B.R. Chandra, R. Galun, B.L. Mordike, and I. Manna: Compd. Sci. Technol., 2003, vol. 63, pp. 771–78.10.1016/S0266-3538(02)00266-X ↗
7. K.H. Lo, C.T. Kwok, F.T. Cheng, and H.C. Man: J. Laser Appl., 2003, vol. 5, pp. 107–14.10.2351/1.1536649 ↗
8. F.T. Cheng, C.T. Kwok, and H.C. Man: Mater. Lett., 2002, vol. 57, pp. 969–74.10.1016/S0167-577X(02)00907-2 ↗
9. T.L. Li, Q.H. Lou, J.X. Dong, Y.R. Wei, J. Zhou, J.R. Liu, Z.M. Zhang, and F.H. Sun: Appl. Surf. Sci., 2002, vol. 193, pp. 102–19.10.1016/S0169-4332(02)00249-0 ↗
10. I. Smurov: Surf. Coat. Technol., 2008, vol. 202, pp. 4496–4502.10.1016/j.surfcoat.2008.04.033 ↗
11. J. Mazumder, A. Schifferer, and J. Choi: Mater. Res. Innov., 1999, vol. 3, pp. 118–31.10.1007/s100190050137 ↗
12. A.J. Pinkerton and L. Li: J. Mech. Eng. Sci., 2004, vol. 218, pp. 531–41.10.1243/095440604323052319 ↗
13. J. Choi and Y. Chang: Int. J. Mach. Tools Manufact., 2005, vol. 45, pp. 597–607.10.1016/j.ijmachtools.2004.08.014 ↗
14. W.R. Morrow, H. Qi, I. Kim, J. Mazumder, and S.J. Skerlos: J. Clean. Prod., 2007, vol. 15, pp. 932–43.10.1016/j.jclepro.2005.11.030 ↗
15. K. Zhang, W.J. Liu, and X.F. Shang: Mater. Sci. Forum, 2007, vols. 534–536, pp. 457–60.10.4028/www.scientific.net/MSF.534-536.457 ↗
16. J. Mazumder and H. Qi: Proc. SPIE, 2005, vol. 5706, pp. 38–59.10.1117/12.601652 ↗
17. X. He and J. Mazumder: J. Appl. Phys., 2007, vol. 101, pp. 53113-1–53113-9.
18. J.D. Majumder, A. Pinkerton, Z. Liu, I. Manna, and L. Li: Appl. Surf. Sci., 2005, vol. 247, pp. 320–27.10.1016/j.apsusc.2005.01.039 ↗
19. M.L. Zhong, W.J. Liu, K.F. Yao, J.C. Goussain, C. Mayer, and A. Becker: Surf. Coat. Technol., 2002, vol. 157, pp. 128–37.10.1016/S0257-8972(02)00165-2 ↗
20. S.H. Si, X.M. Yuan, Y.L. Liu, Y.Z. He, and K. Shin: J. Iron Steel Res. Int., 2006, vol. 13, pp. 74–78.10.1016/S1006-706X(06)60065-4 ↗
21. K.A. Chiang and Y.C. Chen: J. Mater. Process. Technol., 2007, vol. 182, pp. 297–302.10.1016/j.jmatprotec.2006.08.007 ↗
22. PDF cards: Coating A: Co 01-089-4307 (E.A. Owen and D. Madoc-Jones: Proc. Phys. Soc., London, 1954, vol. 67, p. 459), Cr23C6 00-035-0783 (A. Westgren: Jernkontorets Ann., 1933, vol. 17, p. 501), and Co3W 03-065-3520 (M.M. Babich, E.N. Kisljakova, and J.S. Umanskii: Z. Tekh. Fiz., 1938, vol. 8, p. 119)
23. and Coating B: Cr23C6 03-065-3132 (A. Westgren: Jernkontorets Ann., 1933, vol. 117, p. 501), WC 01-073-0471 (A.E. Metcalfe: J. Inst. Met., 1947, vol. 73, p. 591), CoC x 00-044-0962 (A. Badzian and A. Klokocki: J. Cryst. Growth, 1981, vol. 52, p. 843), Cr3C2 01-089-2723 (D. Meinhardt and O. Krisement: Arch. Eisenhuettenwes., 1962, vol. 33, p. 493), W2C 00-020-1315 (Rudy St. Windisch: J. Am. Ceram. Soc., 1967, vol. 50, p. 272), and NiCoCr 00-021-1271 (Mihalison et al., Trans. Am. Inst. Min. Eng., 1968, vol. 242, p. 2399).
24. J.D. Majumder, A. Pinkerton, Z. Liu, I. Manna, and L. Li: Appl. Surf. Sci., 2005, vol. 247, pp. 373–77.10.1016/j.apsusc.2005.01.131 ↗
25. J.D. Majumder, A. Kumar, and L. Li: Tribo. Int., 2009, vol. 42, pp. 750–53.10.1016/j.triboint.2008.10.016 ↗