journal article·2014-02

Synthesis, Characterization and Cold Workability of Cast Copper-Magnesium-Tin Alloys

Agustín Eduardo Bravo Bénard, David Martínez Hernández, José Gonzalo González Reyes, Armando Ortiz Prado, Rafael Schouwenaars Franssens

Publisher page

Abstract

The use of Mg as an alloying element in copper alloys has largely been overlooked in scientific literature and technological applications. Its supposed tribological compatibility with iron makes it an interesting option to replace Pb in tribological alloys. This work describes the casting process of high-quality thin slabs of Cu-Mg-Sn alloys with different compositions by means of conventional methods. The resulting phases were analyzed using X-ray diffraction, scanning electron microscopy, optical microscopy, and energy dispersive X-ray spectroscopy techniques. Typical dendritic α-Cu, eutectic Cu2Mg(Sn) and eutectoid non-equilibrium microstructures were found. Tensile tests and Vickers microhardness show the excellent hardening capability of Mg as compared to other copper alloys in the as-cast condition. For some of the slabs and compositions, cold rolling reductions of over 95 pct have been easily achieved. Other compositions and slabs have failed during the deformation process. Failure analysis after cold rolling reveals that one cause for brittleness is the presence of casting defects such as microshrinkage and inclusions, which can be eliminated. However, for high Mg contents, a high volume fraction of the intermetallic phase provides a contiguous path for crack propagation through the connected interdendritic regions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. A.E. Bravo, H.A. Durán, V.H. Jacobo, A. Ortiz, R. Schouwenaars: Wear, 2013, vol. 302, 1–2, pp. 1528-35.10.1016/j.wear.2013.01.040 ↗
2. E. Rabinowicz: ASLE Trans 14:3, 1971, pp. 198-205.10.1080/05698197108983243 ↗
3. K. Sakai, K. Zushi, M. Sugita, and H. Ishikawa: SAE Technical Paper, 2004-01-1600, 2004.
4. K. Hiromitsu, K. Kazuma, A. Seigi, and H. Hiroyoshi: U.S. Patent, US 2006 0157167 A1, 2006.
5. J. Saleh: U.S. Patent, US 2004 0238086 Al, 2004.
6. DIN EN 50149; VDE 0115-602:2010-04: European Standard EN 50149, 2010.
7. J.C. Park, K.H. Han, S.K. Kim, Y.J. Yoon, D.K. Kim, and E.S. Joo: European Patent, No. EP 0772882. European Patent Office, Munich, Germany, 1997.
8. K. Maki, Y. Ito, H. Matsunaga, H. Mori: Scripta. Mater., 2013, vol. 68, pp. 777-80.10.1016/j.scriptamat.2012.12.027 ↗
9. R. Schouwenaars, J.A. Torres, V.H. Jacobo and A. Ortiz: Mater. Sci. Forum, 2007, vol. 539-543, pp. 317-22.10.4028/www.scientific.net/MSF.539-543.317 ↗
10. R. Schouwenaars, E.I. Ramírez, J. Romero, V.H. Jacobo and A. Ortiz: Eng. Fail. Anal., 2012, vol. 25, pp. 175-81.10.1016/j.engfailanal.2012.05.020 ↗
11. U.S. Environmental Protection Agency: EPA 430-R-08-008, 2008.
12. J.R. Davis: ASM Specialty Handbook, Copper and Copper alloys, ASM International, Metals Park, OH, 2001, pp. 43, 453–563.
13. X.J. Liu, C.P. Wang, I. Ohnuma, R. Kainuma and K. Ishida: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1641-54.10.1007/s11661-004-0073-0 ↗
14. F. Kohler, T. Campanella, S. Nakanishi and M. Rappaz: Acta Mater., 2008, vol. 56, pp. 1519-28.10.1016/j.actamat.2007.12.006 ↗
15. F. Kohler, L. Germond, J.D. Wagnière and M. Rappaz: Acta Mater., 2009, vol. 57, pp. 56–68.10.1016/j.actamat.2008.08.058 ↗
16. S. Fürtauer, D. Li, D. Cupid and H. Flandorfer: Intermetallics, 2013, vol. 34, pp. 142-7.10.1016/j.intermet.2012.10.004 ↗
17. D. Li, P. Franke, S. Fürtauer, D. Cupid, H. Flandorfer: Intermetallics, 2013, vol. 34, pp. 148-58.10.1016/j.intermet.2012.10.010 ↗
18. J.S. Park, C.W. Park and K.J. Lee: Mater. Charact., 2009, vol. 60, pp. 1268-75.10.1016/j.matchar.2009.05.009 ↗
19. A. Bravo, R. Schouwenaars, V.H. Jacobo and A. Ortiz: Mater. Sci. Forum, 2010, vol. 654-656, pp. 1393-6.10.4028/www.scientific.net/MSF.654-656.1393 ↗
20. L. Rokhlin and E. Lysova: Selected Systems from Al-Si-Li to Ni-Si-Ti, vol. 11 A4, Landolt-Börnstein Group IV Physical Chemistry, Springer, Berlin, 2006, pp. 238–47.
21. E.E. Vicente, S. Bermudez, A. Esteban, R. Tendler, B. Arcondo and H. Sirkin: J. Mater. Sci., 1991, vol. 26, pp. 1327-32.10.1007/BF00544473 ↗
22. E.E. Vicente, S. Bermudez, R. Tendler, B. Arcondo and H. Sirkin, J. Mater. Sci. Lett., 1996, vol. 15, pp. 1690-96.10.1007/BF00636197 ↗
23. J. Miettinen and G. Vassilev: J. Min. Metall. Sect. B, 2012, vol. 48(1)B, pp. 53–62.10.2298/JMMB110731008M ↗
24. M. Rappaz, F. Kohler, J. Valloton, A.B. Phillion, and M. Stampanoni: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 563-7.10.1007/s11661-009-0118-5 ↗
25. R.W. Cahn and P. Haasen, eds.: Physical Metallurgy, 4th ed., vol. 1, North Holland, Amsterdam, 1996, p. 312.
26. K. Osamura and Y. Murakami: J. Less-Common Met., 1978, vol. 60, pp. 311-3.10.1016/0022-5088(78)90185-6 ↗
27. G. R. Anstis, P. Chantikul, B. R. Lawn, D. B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533-8.10.1111/j.1151-2916.1981.tb10320.x ↗
28. K.Niihara, R. Morena, D. P. H. Hasselman : J. Mater. Sci. Lett., 1982, vol. 1, pp. 13-6.10.1007/BF00724706 ↗