Through-thickness dependence of in-plane cracking behavior in plasma-sprayed thermal barrier coatings
Source abstract
Abstract
In-plane macrocrack initiation of as-deposited, thermally aged, and in-service used thermal barrier coatings (TBCs) with different levels of pores and microcracks, affecting the Young’s modulus (E c ), have been studied using a newly developed protruded TBC bending technique in conjunction with a finite-element stress analysis. In-plane macrocracking along splat boundaries initiates from a curved edge of protruded TBC under the out-of-plane and shear applied and residual stresses resolved from the in-plane components. The TBC macrocracking is characterized by the critical strain energy density [(σ * )2/E c ], which represents the material propensity, i.e., the ratio of the interfacial cohesive energy to the critical microcrack size (γ f /a c ), and the residual stress effect. The cracking behavior strongly depends on the type of TBC, subjected to different thermal history, and the substrate machining. Ungrooved substrate specimen tests indicate that while the as-deposited TBC has through-thickness fluctuation in (σ * )2/E c , the aged and used TBC exhibits a trough and peak of (σ * )2/E c near the middle section, respectively. In grooved or thinner substrate specimens of the TBCs where the residual stress is partially relieved, cracking further away from the interface occurs at lower and constant (σ * )2/E c representing γ f /a c . It is interpreted that the through-thickness variations of (σ * )2/E c in the ungrooved substrate specimen of the various TBCs are more largely affected by the out-of-plane compressive residual stress than γ f /a c .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. S. Stecura: TM X-3425, NASA, Washington, DC, 1976.
2. J.T. DeMasi, K.D. Sheffler, and M. Ortiz: Phase I. NASA Report-182230, Cleveland, OH, 1989.
3. S.M. Meier, D.M. Nissley, and K.D. Sheffler: Phase II, NASA Report-189111, NASA, Cleveland, OH, 1991.
4. E.H. Jordan, M. Gell, D.M. Pease, L. Shaw, D.R. Clarke, V. Gupta, B. Barber, and K. Vaidyanathan: ASME Turbo Expo ’97, GT-97-363, ASME, New York, NY, 1997.
5. S. Sampath and X. Jiang: Mater. Sci. Eng., 2001, vols. A304–A306, pp. 144–50.10.1016/S0921-5093(00)01464-7 ↗
6. T. Chraska and A.H. King: Thin Solid Film, 2001, vol. 397, pp. 40–48.10.1016/S0040-6090(01)01361-X ↗
7. V. Teixeira, M. Andritschky, W. Fischer, H.P. Buchkremer, and D. Stöver: Surf. Coating Technol., 1999, vols. 120–121, pp. 103–11.10.1016/S0257-8972(99)00341-2 ↗
8. P. Scardi, M. Leoni, L. Bertini, and L. Bertamini: Surf. Coating Technol., 1997, vols. 94–95, pp. 82–87.10.1016/S0257-8972(97)00482-9 ↗
9. A.A. Griffith: Phil. Trans. R. Soc., 1920, vol. A211, p. 163.
10. G.R. Irwin: Trans. Am. Soc. Mech. Eng., J. Appl. Mech. 1957, vol. 24, pp. 361–64.10.1115/1.4011547 ↗
11. J.F. Knott: Fundamental of Fracture Mechanics, Butterworth and Co., London, 1973, p. 109.
12. ASTM Standard C633-79 C, ASTM, Philadelphia, PA, 1979.
13. W. Han, E.F. Rybicki, and J.R. Shadley: J. Thermal Spray Technol., 1993, vol. 2, pp. 145–50.10.1007/BF02652022 ↗
14. C.J. Johnson, J.A. Ruud, R. Bruce, and D. Wortman: Surf. Coating Technol., 1998, vols. 108–109, pp. 80–85.10.1016/S0257-8972(98)00668-9 ↗
15. P.G. Charalambides, J. Lund, A.G. Evans, and R.M. McMeeking: J Appl. Mech., 1989, vol. 56, p. 77.10.1115/1.3176069 ↗
16. L. Qian, S. Zhu, and Y. Kagawa: Proc. of the 27th International Cocoa Beach Conf. on Advanced Ceramics and Composites, W.M. Kriven and H.T. Lin, eds., The American Ceramics Society, Waterville, OH, 2003, pp. 503–09.
17. G. Thurn, G.A. Schneider, H.A. Bahr, and F. Aldinger: Surf. Coating Technol., 2000, vol. 123, pp. 147–58.10.1016/S0257-8972(99)00528-9 ↗
18. Z. Zhang, T.E. Bloomer, J. Kameda, and S. Sakurai: ASME Turbo Expo ’97, GT-99-380, ASME, New York, NY, 1999.
19. Z. Zhang, T.E. Bloomer, J. Kameda, and S. Sakurai: in Interfacial Engineering for Optimized Properties II, C.B. Carter, E.L. Hall, S. Nutt, and C.L. Briant, eds., Materials Research Society, Pittsburgh, PA, 2000, pp. 279–84.
20. Z. Zhang, J. Kameda, A.H. Swanson, and S. Sakurai: in Advance in Surface Engineering, W.J. Meng, A. Kumar, G.L. Doll, Y.-T. Cheng, S. Veprek, and Y.-W. Chung, eds., Materials Research Society, Pittsburgh, PA, 2002, pp. 95–106.
21. Z. Zhang, J. Kameda, A.H. Swanson, S. Sakurai, and M. Sato: Symp. Surface Engineering: Science and Technologies II, A. Kumar, Y.-W. Chung, J.J. Moore, G.L. Doll, K. Yatsui, and D. Misra, eds., TMS, Warrendale, PA, 2002, pp. 327–36.
22. B. Siebert, C. Funke, R. Vaßen, and D. Stover: J. Mater. Proc. Technol., 1999, vols. 92–93, pp. 217–23.10.1016/S0924-0136(99)00243-5 ↗
23. Z. Zhang, J. Kameda, and S. Sakurai: Ames Laboratory, Ames, IA, unpublished research, 2003.
24. Aerospace Structural Metal Handbooks, Center for Information and Numerical Data Analysis and Synthesis, Purdue University, West Lafayette, IN, 1992.
25. J.A. Thompson and T.W. Clyne: Acta Mater., 2001, vol. 49, pp. 1565–67.10.1016/S1359-6454(01)00065-9 ↗
26. W. Weibull: J. Appl. Mech., 1951, vol. 18, pp. 293–97.10.1115/1.4010337 ↗
27. A.G. Evans and R.L. Jones: J. Am. Ceram. Soc., 1978, vol. 61, pp. 156–60.10.1111/j.1151-2916.1978.tb09261.x ↗
28. J. Kameda and C.J. McMahon, Jr.: Metall. Trans. A, 1981, vol. 12A, pp. 31–37.10.1007/BF02648505 ↗
29. J. Cheng, E.H. Jordan, B. Barber, and M. Gell: Acta Mater., 1999, vol. 46, pp. 5839–50.10.1016/S1359-6454(98)00230-4 ↗
30. R. Morrell: Handbook of Properties of Technical and Engineering Ceramics: Part I Introduction form the Engineer and Designer, Her Majesty’s Stationary Office, London, 1985, p. 95.
31. G.R. Irwin: J. Appl. Mech., 1962, vol. 29, p. 651.10.1115/1.3640649 ↗
32. J. Thornton, D. Cookson, and E. Pescott: Surf. Coating Technol., 1999, vols. 120–121, pp. 96–102.10.1016/S0257-8972(99)00340-0 ↗
33. P. Scardi, M. Leoni, L. Bertini, L. Bertamini, and F. Ceruschi: Surf. Coating Technol., 1998, vols. 108–109, pp. 93–98.10.1016/S0257-8972(98)00616-1 ↗
34. T. Tsakalakos, M. Crofit, I. Zakharchaenko, Z. Zhong, L. Pei, A. Fast, D. Kim, and M. Muhammed: CD-ROM 6th Int. Conf. on Nanostructured Materials, T. Tsakalakos, L. Kabacoff, E.J. Lavernia, and M.L. Trudeau, eds., NM-109, NANO-2002 Nanotechnology Enterprises, Inc., Orlando, FL, 2002.
35. E.P. Busso, J. Lin, S. Sakurai, and M. Nakayama: Acta Mater., 2001, vol. 49, pp. 1515–28.10.1016/S1359-6454(01)00060-X ↗
36. A.M. Freborg, B.L. Ferguson, W.J. Brindley, and G.J. Petrus: Mater. Sci. Eng., 1998, vol. A245, pp. 182–90.10.1016/S0921-5093(97)00849-6 ↗
37. P. Thavorniti, Y. Ikuhara, and T. Sakuma: J. Am. Ceram. Soc., 1998, vol. 81, pp. 2927–32.10.1111/j.1151-2916.1998.tb02715.x ↗