journal article·2012-03

Measurement of Flow Stress in Supercooled Austenite for High Hardenability Steel

Yasuhiro Yogo, Michiaki Kamiyama, Takamichi Iwata, Noritoshi Iwata, Takashi Ishikawa

Publisher page

Abstract

In this article, the isothermal flow stress in supercooled austenite was measured for a high hardenability steel. Supercooled austenite forms at the nonequilibrium phase and changes into other phases within a short time. It was confirmed that conventional tensile tests, which require maintaining a constant temperature before stretching, cannot accurately measure the flow stress in supercooled austenite. Therefore, a new tensile test named “the continuous cooling tensile test” was developed. In this test, stretching is conducted during continuous cooling. In the continuous cooling tensile test, the flow stress between 673 K and 973 K (400 °C and 700 °C) was measured. Microscopic observations of the continuous cooling test results verified that the microstructures were supercooled austenite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. T. Senuma: ISIJ Int., 2001, vol. 41, pp. 520–32.10.2355/isijinternational.41.520 ↗
2. X. Bano and J.P. Laurent: Proc. 39th Mechanical Working and Steel Processing Conf., Indianapolis, IN, The Iron & Steel Society, Warrendale, PA, 1998, vol. XXXV, pp. 673–80.
3. D.J. Schmatz, J.C. Shyne, and V.F. Zackay: Met. Progr., 1950, vol. 76, pp. 66–69.
4. R.F. Harvey: Iron Age, 1951, vol. 168, pp. 70–71.
5. M. Merklein and J. Lechler: J. Mater. Process. Technol., 2006, vol. 177, pp. 452–55.10.1016/j.jmatprotec.2006.03.233 ↗
6. D.W. Fan, H.S. Kim, and B.C. De Cooman: Hot Sheet Metal Forming of High-Performance Steel, CHS2, Luleå, Sweden, 2009, pp. 7–15.
7. A. Turetta, S. Bruschi, and A. Ghiotti: J. Mater. Process. Technol., 2006, vol. 177, pp. 396–400.10.1016/j.jmatprotec.2006.04.041 ↗
8. S. Timoshenko: Strength of Materials, Part 1: Elementary Theory and Problems, 3rd ed., D. Van Nostrand Company, Inc., New York, NY, 1955, pp. 6–8.