Effects of Atomic Hydrogen and Flaking on Mechanical Properties of Wheel Steel
Source abstract
Abstract
The effects of atomic hydrogen and flaking on the strength, plasticity, fracture toughness, and hydrogen-induced delayed cracking (HIDC) of a wheel steel were investigated. The results showed that the critical diffusible (C 0 * ) or total (C * ) hydrogen concentration for forming flaking were C 0 * = 1.3 ppm and C * = 3.7 ppm, respectively. There was no effect of flaking on the strength, plasticity, and fracture toughness if the amount of flaking was low, e.g., diffusible hydrogen concentration C 0 ≤ 3.9 ppm. Atomic hydrogen had no effect on the fracture toughness and the mechanical properties extended with normal strain rate. Atomic hydrogen, however, had the effect of reducing the plasticity during slow strain rate tests and induced delayed failure under constant displacement. The threshold stress intensity factor of HIDC, K IH, decreased linearly with the diffusible hydrogen concentration C 0, i.e., K IH(MPam1/2) = K IC − 3.6C 0 (ppm) (0.2 ≤ C 0 ≤ 03.9). The HIDC could be partly attributed to hydrogen-induced additive stress. There was no effect of flaking on HIDC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. R.R. McLellan, Z.R. Xu: Scripta Mater., 1997, vol. 36, pp. 1201–0610.1016/S1359-6462(97)00015-8 ↗
2. J.P. Hirth: Metal. Trans. A, 1981, vol. 11A, pp. 861–90
3. C.G. Interrante: Current Solution to Problems in Steels, ASM, Metals Park, OH, 1982, pp. 2–10
4. G.M. Pressourye: Current Solution to Problems in Steels, ASM, Metals Park, OH, 1982, pp. 18–25
5. J.E. Steiner: Current Solution to Problems in Steels, ASM, Metals Park, OH, 1982, pp. 55–60
6. R.A. Oriani, J.P. Hirth, M. Smialowski: Hydrogen Degradation of Ferrous Alloys, Noyes Pub., Park Ridge, NJ, 1985, pp. 90–94
7. R.T. Fruehan: Iron Steelmaker, 1997, vol. 24, pp. 61–69
8. M.G. Pollard: Proc. Inst. Eng., 1999, vol. 213, Part F, pp. 181–9510.1243/0954411991534906 ↗
9. C. Pan, Y.J. Su, W.Y. Chu, Z.B. Li, D.T. Ling, L.J. Qiao: Corr. Sci., 2002, vol. 44, pp. 1983–9310.1016/S0010-938X(02)00011-2 ↗
10. C. Pan, W.Y. Chu, Z.B. Li, Y.J. Su, K.W. Gao, L.J. Qiao: Mater. Sci. Eng. A, 2003, vol. 351A, pp. 293–9810.1016/S0921-5093(02)00856-0 ↗
11. J.Y. He, K.W. Gao, Y.J. Su, L.J. Qiao, W.Y. Chu: Smart Mater. Struct., 2004, vol. 13, pp. N24–N2810.1088/0964-1726/13/2/N02 ↗
12. J.Y. He, K.W. Gao, Y.J. Su, L.J. Qiao, W.Y. Chu: Mater. Sci. Eng. A, 2004, vol. 364A, pp. 333–3810.1016/j.msea.2003.08.062 ↗
13. X. Peng, Y.J. Su, K.W. Gao, L.J. Qiao, W.Y. Chu: Mater. Lett., 2004, vol. 58, pp. 2073–7510.1016/j.matlet.2004.01.004 ↗
14. National Standard of China. No. GB 12445.3-90
15. R.A. Oriani, P.H. Josephic: Acta Metall., 1974, vol. 22, pp. 1065–7410.1016/0001-6160(74)90061-3 ↗
16. H.K. Birnbaum, P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176A, pp. 191–20210.1016/0921-5093(94)90975-X ↗
17. J.C.M. Li, C.G. Park, S.M. Ohr: Scripta Mater., 1986, vol. 20, pp. 371–7610.1016/0036-9748(86)90160-2 ↗
18. Y.B. Wang, W.Y. Chu, C.M. Hsiao: Scripta Mater., 1985, vol. 19, pp. 1157–6010.1016/0036-9748(85)90227-3 ↗
19. T.Y. Zhang, W.Y. Chu, C.M. Hsiao: Scripta Mater., 1986, vol. 20, pp. 225–2910.1016/0036-9748(86)90131-6 ↗
20. T. Zhang, W.Y. Chu, K.W. Gao, L.J. Qiao: Mater. Sci. Eng. A, 2003, vol. 347A, pp. 291–9910.1016/S0921-5093(02)00600-7 ↗
21. J.F. Knott: Fundamentals of Fracture Mechanics, Butterworth and Co., London, 1973, pp. 114–16
22. W.Y. Chu, K.W. Gao, J.X. Li, L.J. Qiao: Steel Res., 2001, vol. 72, pp. 66–7010.1002/srin.200100084 ↗
23. F. Garafalo, Y.T. Chou, V. Ambegaokar: Acta Metall., 1960, vol. 8, pp. 504–1210.1016/0001-6160(60)90103-6 ↗
24. J.M. Hodge, M.A. Orehoski, J.E. Steiner: Trans. TMS-AIME, 1964, vol. 230, pp. 1182–93
25. J.H. Chen, G.Z. Wang, C. Yan, L. Zhu: Int. J. Fract., 1997, vol. 83, pp. 105–2010.1023/A:1007306932437 ↗
26. G.Z. Wang, X.C. Ren, J.H. Chen: Int. J. Fract., 2003, vol. 119, pp. L61–L6310.1023/A:1023929310530 ↗
27. P.G. Shewmen: Diffusion in Solids, McGraw-Hill, New York, NY, 1963, pp. 21–36
28. D.P. Williams, H.G. Nelson: Metall. Trans., 1972, vol. 3, pp. 2107–1310.1007/BF02643219 ↗
29. M.A.V. Davanathan, Z. Stachurski: Proc. R. Soc., 1962, vol. 270A, pp. 92–97