journal article·2010-07

Cooling Slope Casting Process for Synthesis of Bulk Metallic Glass Based Composites with Semisolid Structure

Advenit Makaya, Takuya Tamura, Kenji Miwa

Publisher page

Abstract

A process combining cooling slope casting and suction casting was developed to generate a semisolid structure in a Zr-based bulk metallic glass matrix composite. The melt was injected onto a cooling slope and subsequently vacuum sucked into a cylindrical copper mold placed at the end of the slope. The structure obtained for 4-mm-diameter specimens of composition Zr66.4Nb6.4Cu10.5Ni8.7Al8 consists of a dispersion of spheroidal and rosettelike bcc crystals in a glassy matrix. Various slope angles, slope lengths, and injection pressures were tested. The coarsest and most spheroidal crystal structure was obtained at short slope lengths and high injection pressures. Microstructure analysis suggests that the slope is the location of extensive crystal nucleation and possible fragmentation, while the microstructure’s morphological evolution seems to occur mainly in the mold. The semisolid structure is expected to confer improved mechanical properties and ductility to the composite material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Aluminum Alloys Composites Properties · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A.L. Greer: Mater. Today, 2009, vol. 12 (1–2), pp. 14–22.10.1016/S1369-7021(09)70037-9 ↗
2. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
3. A. Inoue, A. Takeuchi, and B. Shen: Mater. Trans. JIM, 2001, vol. 42, pp. 970–78.10.2320/matertrans.42.970 ↗
4. C.A. Schuh, T.C. Hufnagel, and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4067–4109.10.1016/j.actamat.2007.01.052 ↗
5. K.M. Flores, D. Suh, R. Howell, P. Asoka-Kumar, P.A. Sterne, and R.H. Dauskardt: Mater. Trans. JIM, 2001, vol. 42, pp. 619–22.10.2320/matertrans.42.619 ↗
6. J. Eckert, J. Das, S. Pauly, and C. Duhamel: J. Mater. Res., 2007, vol. 22, pp. 285–301.10.1557/jmr.2007.0050 ↗
7. C.C. Hays, C.P. Kim, and W.L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901–04.10.1103/PhysRevLett.84.2901 ↗
8. U. Kuhn, J. Eckert, N. Mattern, and L. Schultz: Appl. Phys. Lett., 2002, vol. 80, pp. 2478–80.10.1063/1.1467707 ↗
9. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind, M.D. Demetriou, and W.L. Johnson: Nature, 2008, vol. 451, pp. 1085–89.10.1038/nature06598 ↗
10. C. Fan, R.T. Ott, and T.C. Hufnagel: Appl. Phys. Lett., 2002, vol. 81, pp. 1020–22.10.1063/1.1498864 ↗
11. D.C. Hofmann, J.Y. Suh, A. Wiest, M.L. Lind, M.D. Demetriou, and W.L. Johnson: Proc. Nat. Acad. Sci. U.S.A., 2008, vol. 105, pp. 20136–20140.10.1073/pnas.0809000106 ↗
12. M. Calin, L.C. Zhang, and J. Eckert: Scripta Mater., 2007, vol. 57, pp. 1101–04.10.1016/j.scriptamat.2007.08.018 ↗
13. F. Li, S. Guan, B. Shen, A. Makino, and A. Inoue: Mater. Trans., 2007, vol. 48, pp. 3193–96.10.2320/matertrans.MRP2007181 ↗
14. H.V. Atkinson: Prog. Mater. Sci., 2005, vol. 50, pp. 341–412.10.1016/j.pmatsci.2004.04.003 ↗
15. Z. Fan: Int. Mater. Rev., 2002, vol. 47, pp. 49–85.10.1179/095066001225001076 ↗
16. M.C. Flemings: Metall. Trans. A, 1991, vol. 22A, pp. 957–81.10.1007/BF02661090 ↗
17. G.R. Burgos, A.N. Alexandrou, and V. Entov: J. Mater. Process. Technol., 2001, vol. 110, pp. 164–76.10.1016/S0924-0136(00)00731-7 ↗
18. M. Movahedi, A. Karimi Taheri, and H. Niamanesh: Int. J. Cast Met. Res., 2007, vol. 20, pp. 221–26.10.1179/136404607X256079 ↗
19. M. Bunck, N. Warnken, and A. Buhrig-Polaczeck: Proc. 5th Decennial Int. Conf. on Solidification Processing SP07, Sheffield, United Kingdom, July 23–25, 2007, H. Jones, ed., The University of Sheffield, Sheffield, United Kingdom, 2007, pp. 615–19.
20. T. Haga and S. Suzuki: J. Mater. Process. Technol., 2001, vol. 118, pp. 169–72.10.1016/S0924-0136(01)00888-3 ↗
21. T. Haga and P. Kapranos: J. Mater. Process. Technol., 2002, vols. 130–131, pp. 594–98.10.1016/S0924-0136(02)00819-1 ↗
22. T. Motegi, F. Tanabe, and E.J. Sugiura: Mater. Sci. Forum, 2002, vols. 396–402, pp. 203–08.10.4028/www.scientific.net/MSF.396-402.203 ↗
23. A. Mitsuru, S. Hiroto, H. Yasunori, S. Tatsuo, S. Satoru, and Y. Atsushi: Patent EP 0745694 A1, UBE Industries, Ube, Yamaguchi-ken, Japan, 1996.
24. G.Y. Sun, G. Chen, C.T. Liu, and G.L. Chen: Scripta Mater., 2006, vol. 55, pp. 375–78.10.1016/j.scriptamat.2006.04.017 ↗
25. G.Y. Sun, G. Chen, and G.L. Chen: Intermetallics, 2007, vol. 15, pp. 632–34.10.1016/j.intermet.2006.10.026 ↗
26. J. Das, W. Loser, U. Kuhn, J. Eckert, S.K. Roy, and L. Schultz: Appl. Phys. Lett., 2003, vol. 82, pp. 4690–92.10.1063/1.1587254 ↗
27. C. Fan, H. Choo, and P.K. Liaw: Scripta Mater., 2005, vol. 53, pp. 1407–10.10.1016/j.scriptamat.2005.08.025 ↗
28. C. Fan, D. Qiao, T.W. Wilson, H. Choo, and P.K. Liaw: Mater. Sci. Eng. A, 2006, vol. A431, pp. 158–65.10.1016/j.msea.2006.05.129 ↗
29. D. Liu, H.V. Atkinson, P. Kapranos, W. Jirattiticharoean, and H. Jones: Mater. Sci. Eng., 2003, vol. A361, pp. 213–24.10.1016/S0921-5093(03)00528-8 ↗
30. J. Eckert, U. Kuhn, N. Mattern, G. He, and A. Gebert: Intermetallics, 2002, vol. 10, pp. 1183–90.10.1016/S0966-9795(02)00133-4 ↗
31. H. Fredriksson and U. Akerlind: Materials Processing During Casting, John Wiley and Sons, Chichester, United Kingdom, 2006.10.1002/9780470017920 ↗
32. E. Cardoso Legoretta, H.V. Atkinson, and H. Jones: Proc. 5th Decennial Int. Conf. on Solidification Processing SP07, Sheffield, United Kingdom, July 23–25, 2007, H. Jones, ed., The University of Sheffield, Sheffield, United Kingdom, 2007, pp. 582–86.
33. A. Das, J. Li, and Z. Fan: Acta Mater., 2002, vol. 50, pp. 4571–85.10.1016/S1359-6454(02)00305-1 ↗