journal article·2004-12

Effect of ternary additions on the structure and properties of coatings produced by a high aluminum galvanizing bath

M. Ranjan, R. Tewari, W. J. Van Ooij, V. K. Vasudevan

Publisher page

Abstract

A Zn-Al eutectoid galvanizing alloy has been developed to address issues related to the growing environmental concern regarding leaching of zinc into the soil. The basic composition of the bath was selected close to the eutectoid point in the binary Zn-Al system, together with ternary additions in the form of Bi, rare earths (REs) and Si. The effects of these additions on the growth rate, microstructure, and corrosion properties of the coatings were investigated. Both Bi and REs showed a minimal effect on controlling the coating thickness developed with the eutectoid bath composition, which was about an order thicker than the commercially prevalent value of ∼80 µm. Addition of Si to the bath reduced the thickness of the coating to a level of around 30 µm. The morphology of the coatings, investigated in detail using scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction, showed the presence of three layers: interface layer, intermediate layer, and overlay. The dense interfacial layer mainly consisted of the Fe2Al5 phase; the intermediate layer contained two phases, an Fe-al phase and a Zn-rich phase; and the overlay had a composition close to that of the liquid bath. The intermediate layer contained a varying amount of porosity in all cases except in the coatings formed by the silicon containing bath. The thin, dense, and smooth coating obtained with the latter bath showed excellent resistance to corrosion, evaluated by field exposure as well as by electrochemical tests. An attempt is made to unravel the role of different elements in the formation of coating microstructure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. C.E. Jordan and A.R. Marder: J. Mater. Sci., 1997, vol. 32, p. 5593.10.1023/A:1018680625668 ↗
2. A.R. Marder: ASM Handbook, ASM, Materials Park, OH, 1997, vol. 20, p. 470.
3. H.E. Townsend and A.R. Borzillo: Galvatech ’95, Chicago, IL, 1995, Iron and Steel Society, 1995, p. 171.
4. A.R. Marder: Progr. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
5. N.-Y. Tang and G.R. Adams: Minerals, Met. Mater. Soc., 1993, pp. 41–54.
6. P. Perrot, J.-C. Tissier, and J.-Y. Dauphin: Z. Metallkd., 1992, vol. 83, p. 11.
7. K.L. Lin, J.K. Ho, C.S. Jong, and J.T. Lee: Minerals, Met. Mater. Soc., 1983, pp. 89–97.
8. Y. Hisamatsu: Galvatech ’89, ISIJ, Tokyo, 1989, pp. 3–12.
9. F.E. Goodwin: in Zinc Based Steel Coating Systems: Metallurgy and Performance, G. Krauss and D.K. Matlock, eds., TMS, Warrendale, PA, 1990, p. 183.
10. T. Aoki, Y. Miyoshi, and T. Kittaka: Galvatech ’95, Chicago, IL, 1995, Iron and Steel Society, 1995, p. 463.
11. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth, Boston, MA, 1976, pp. 843–44.
12. W.J. Van Ooij and V. Prasanna: US Patent 6,372,296.
13. W.J. Van Ooij and V. Prasanna: US Patent 6,200,636.
14. W.J. Van Ooij and M. Ranjan: 5th Asian Pacific General Galvanizing Conf., Busan, Korea, Oct. 21–25, 2001, pp.73–88.
15. D.A. Jones: Principles and Prevention of Corrosion, Prentice-Hall, Englewood Cliffs, NJ, 1996, pp. 146–52.
16. Binary Alloys Phase Diagram, Thaddeus B Massalski, ed., American Society for Metals, Metals Park, OH, 1986, vol. 1, pp. 111–12.
17. Binary Alloys Phase Diagram, Thaddeus B Massalski, ed., American Society for Metals, Metals Park, OH, 1986, vol. 1, pp. 184–87.
18. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagram, ASM INTERNATIONAL, Materials Park, OH, 1997, vol. 3, pp. 3660–72.
19. P. Villars, A. Prince, and H. Okamoto: Handbook of Ternary Alloy Phase Diagram, ASM INTERNATIONAL, Materials Park, OH, 1997, vol. 3, pp. 3602–20.
20. Y. Lepretre, J.M. Mataigne, M. Guttmann, and J. Philibert: in Zinc Based Steel Coating System: Production and Performances, F.E. Goodwin, ed., TMS, Warrendale, PA, 1998, pp. 95–106.
21. Z.W. Chen, R.M. Sharp, and J.T. Gregory: Mater. Sci. Technol., 1990, vol. 6, p. 1173.10.1179/mst.1990.6.12.1173 ↗
22. M. Guttmann, Y. Lepretre, A. Aubry, M.-J. Roche, T. Moreau, P. Drillet, J.M. Mataigne, and H. Baudin: Galvatech ’95, Chicago, IL, 1995, Iron and Steel Society, 1995, pp. 295–307.
23. J.H. Selverian, A.R. Marder, and M.R. Notis: Metall. Trans. A, 1989, vol. 20A, pp. 543–55.10.1007/BF02653934 ↗
24. N.-Y. Tang: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1669–1704.
25. F.E. Goodwin: in Zinc Based Steel Coating Systems—Metallurgy and Performance, G. Krauss and D.K. Matlock, eds., TMS, Warrendale, PA, 1990, p. 183.
26. I. Tatsumi, T. Yoshihiko, N. Tetsuya, T. Koshi, and Y. Masamichi: Proc. 1st Asian-Pacific Galvanizing Conf., Taipei, Taiwan, Sept. 15–18, 1992, pp. 158–66.
27. H. Kubota, T. Kazuhiko, T. Yasuhiro, and T. Junichi: Proc. 1st Asian-Pacific Galvanizing Conf., Taipei, Taiwan, Sept. 15–18, 1992, pp. 149–57.
28. J.C. Zocolla, H.E. Townsend, A.R. Borzillo, and J.B. Horton: in Atmospheric Factors Affecting the Corrosion of Engineering Metals, ASTM STP 646, S.K. Coburn, ed., ASTM, Philadelphia, PA, 1978, p. 165.10.1520/STP27323S ↗
29. M. Ranjan: Master’s Thesis, University of Cincinnati, Cincinnati, OH, 2003, p. 29.
30. M. Gagne: Metallurgy, 1990, vol. 53, Nr.5, pp. 269–71.
31. Y. Yang and Z. Yu: Acta Met. Sinica, 1993, vol. 29A, p. 540.
32. N.D. Neemuchwala and A.A. Hershman: Proc. 7th Int. Conf., Hot Dip Galvanizing, Paris, 1964, Zinc Development Association, Pergamon Press, Oxford, United Kingdom, 1967, p. 179.
33. J.J. Sebisty and R.H. Palmer: Proc. 7th Int. Conf., Hot Dip Galvanizing, Paris, 1974, Zinc Development Association, Pergamon Press, Oxford, United Kingdom, 1967, p. 235.