journal article·2020-09

Experimental Study of the Micromechanical Behavior of Ferrite in DP Steel Under Various Stress States

Yongsheng Xu, Wenjiao Dan, Chuanwei Li, Weigang Zhang

Publisher page

Abstract

The low yield ratio and continuous yielding behavior of ferrite-martensite dual-phase (DP) steels are determined by their production process and microstructure. In this work, high-resolution in situ electron backscatter diffraction (EBSD) experiments were performed to study the deformation and hardening behavior of DP steel in uniaxial tensile, plane strain and shear stress states. In the EBSD experiments, we first collected the data for different deformation stages from the same area for each sample (loading was paused during EBSD data collection). Subsequently, we analyzed the strain contouring maps, geometrically necessary dislocation (GND) distribution and ferrite deformation of all the samples based on the postprocessing of the EBSD data. The results showed that (i) the volume expansion accompanying the austenite-to-martensitic transformation during annealing gives rise to ferrite plastic deformation, and the residual deformation after overaging of the fine ferrite grains near the martensite group is the largest; (ii) the high-density GND bands of the shear sample is the same as the shear stress/strain direction, and the high-density GND bands of the uniaxial tensile and plane strain samples are perpendicular to their maximum stress/strain directions; and (iii) in the shear state, the average strain of ferrite grains in each grain size range is similar; but the deformation tends to aggregate toward large-size grains in the uniaxial tensile and plane strain samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. 1.K. Hulka: Materials Science Forum. Trans Tech Publications Ltd, 2003, vol. 414, pp. 101-110.10.4028/www.scientific.net/MSF.414-415.101 ↗
2. P. Tsipouridis, E. Werner, C. Krempaszky, and E. Tragl (2006) Steel Res. Int. vol. 77, pp. 654-667.10.1002/srin.200606444 ↗
3. 3.K. Mukherjee, S. Hazra, P. Petkov, and M. Militzer: Materials and manufacturing processes, 2007, vol. 22(4), pp. 511-515.10.1080/10426910701236049 ↗
4. C. Chang: Correlation between the Microstructure of Dual Phase Steel and Industrial Tube Bending Performance, University of Windsor, 2010, pp. 7–14.
5. G.R. Speich and R.L. Miller: Structure and Properties of Dual-Phase Steels, R.A. Kot and J.W. Morris, eds., TMS-AIME, Warrendale, Pennsylvania, 1979, pp. 145–82.
6. 6.A. López-Baltazar, A. Salinas-Rodríguez, and E. Nava-Vázquez: Materials Science Forum. Trans Tech Publications Ltd, 2007, vol. 560, pp. 79-84.10.4028/www.scientific.net/MSF.560.79 ↗
7. 7.P.R. Mould: JOM, 1982, vol. 34(5), pp. 18-28.10.1007/BF03339145 ↗
8. 8.Z. ZHANG, R. SONG, Z. CHENG, A. ZHAO, Z. ZHAO, G. LIU, and A. XIONG: Hot Working Technology, 2008, vol. 37(6), pp. 27-33.
9. S. Renbo, G. Zhifei, and D. Qifeng: International Conference on Steel Rolling, 2010.
10. 10.A. Ramazani, K. Mukherjee, A. Schwedt, P. Goravanchi, U. Prahl, and W. Bleck: International Journal of Plasticity, 2013, vol. 43, pp. 128-152.10.1016/j.ijplas.2012.11.003 ↗
11. 11.M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Materials Science and Engineering: A, 2010, vol. 527(10-11), pp. 2738-2746.10.1016/j.msea.2010.01.004 ↗
12. P. Tsipouridis: Mechanical properties of dual-phase steels, Technical University, Muenchen, Germany, 2006.
13. 13.G.T. Hahn: Acta metallurgica, 1962, vol. 10(8), pp. 727-738.10.1016/0001-6160(62)90041-X ↗
14. 14.S.S. Hansen, R.R. Pradhan: In: R.A. Kot, B.L. Bramfitt, (Eds.) Fundamentals of dual-phase steels, TMS-AIME. Warrendale, PA, 1981, pp. 113–144.
15. 15.J. Kang, Y. Ososkov, J.D. Embury, and D.S. Wilkinson: Scripta Materialia, 2007, vol. 56(11), pp. 999-1002.10.1016/j.scriptamat.2007.01.031 ↗
16. 16.H. Ghadbeigi, C. Pinna, S. Celotto, and J.R. Yates: Materials Science and Engineering: A, 2010, vol. 527(18-19), pp. 5026-5032.10.1016/j.msea.2010.04.052 ↗
17. 17.C.C. Tasan, J.P.M. Hoefnagels, and M.G.D. Geers: Scripta Materialia, 2010, vol. 62(11), pp. 835-838.10.1016/j.scriptamat.2010.02.014 ↗
18. 18.C.C. Tasan, J.P. Hoefnagels, M. Diehl, D. Yan, F. Roters, and D. Raabe: International Journal of Plasticity, 2014, vol. 63, pp. 198-210.10.1016/j.ijplas.2014.06.004 ↗
19. 19.C.C. Tasan, M. Diehl, D. Yan, C. Zambaldi, P. Shanthraj, F. Roters, and D. Raabe: Acta Materialia, 2014, vol. 81, pp. 386-400.10.1016/j.actamat.2014.07.071 ↗
20. 20.D. Yan, C.C. Tasan, and D. Raabe: Acta Materialia, 2015, vol. 96, pp. 399-409.10.1016/j.actamat.2015.05.038 ↗
21. 21.G.I. Taylor: J. Inst. Metals, 1938, vol. 62, pp. 307-324.
22. 22.G.I. Taylor: Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1934, vol. 145(855), pp. 362-387.10.1098/rspa.1934.0106 ↗
23. 23.H. Ghassemi-Armaki, R. Maaß, S.P. Bhat, S. Sriram, J.R. Greer, and K.S. Kumar: Acta materialia, 2014, vol. 62, pp. 197-211.10.1016/j.actamat.2013.10.001 ↗
24. 24.J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, and M. Calcagnotto: Acta Materialia, 2011, vol. 59(11), pp. 4387-4394.10.1016/j.actamat.2011.03.062 ↗
25. 25.M.F. Ashby: The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, 1970, vol. 21(170), pp. 399-424.10.1080/14786437008238426 ↗
26. 26.J.F. Nye: Acta metallurgica, 1953, vol. 1(2), pp. 153-162.10.1016/0001-6160(53)90054-6 ↗
27. 27.S. Sinha, J.A. Szpunar, N.K. Kumar, and N.P. Gurao: Materials Science and Engineering: A, 2015, vol. 637, pp. 48-55.10.1016/j.msea.2015.04.005 ↗
28. 28.X. Zhao, Y. Fan, H. Wang, and Y. Liu: Materials Letters, 2015, vol. 160, pp. 51-54.10.1016/j.matlet.2015.07.067 ↗
29. 29.M.A. MOHTADI-BONAB, and M. ESKANDARI: Engineering Failure Analysis, 2017, vol. 79, pp. 351-360.10.1016/j.engfailanal.2017.05.022 ↗
30. 30.A. Kundu, and D.P. Field: Materials Science and Engineering: A, 2016, vol. 667, pp. 435-443.10.1016/j.msea.2016.05.022 ↗
31. 31.A.J. Schwartz, M. Kumar, B.L. Adams, and D.P. Field (Eds.): Electron Backscatter Diffraction in Materials Science, New York: Springer, 2009.
32. 32.M. Kamaya: Materials Characterization, 2009, vol. 60(2), pp.125-132.10.1016/j.matchar.2008.07.010 ↗
33. 33.S.I. Wright, M.M. Nowell, and D.P. Field: Microscopy and microanalysis, 2011, vol. 17(3), pp. 316-329.10.1017/S1431927611000055 ↗
34. 34.M. Kamaya, A.J. Wilkinson, and J.M. Titchmarsh: Nuclear engineering and design, 2005, vol. 235(6), pp. 713-725.10.1016/j.nucengdes.2004.11.006 ↗
35. 35.A. Sáez-Maderuelo, L. Castro, and G. De Diego: Journal of nuclear materials, 2011, vol. 416(1-2), pp. 75-79.10.1016/j.jnucmat.2010.11.092 ↗