journal article·2019-05-15

Compressive Behavior of Porous Metals with Aligned Unidirectional Pores Compressed in the Direction Perpendicular to the Pore Direction

Tomoya Tamai, Daiki Muto, Tomonori Yoshida, Mahiro Sawada, Shinsuke Suzuki, Matej Vesenjak, Zoran Ren

Publisher page

Abstract

The compressive behavior of porous A6061 alloy with aligned unidirectional pores was investigated. Porous specimens with various sizes and relative thicknesses (thickness t/length l) of cell walls were prepared via machining after various heat treatments. Compression tests were conducted on porous specimens in the direction perpendicular to the pore direction. Distributions of the equivalent plastic strain were obtained using digital image correlation. Finite element analyses were also conducted to obtain the stress and strain distributions. The compressive stress σ increased with the increase in the compressive strain, and the increase in σ was then suppressed. Using a newly constructed deformation model, it was revealed that a plateau region was initiated by the plastic collapse of the cell walls. After the occurrence of the plastic collapse, three deformation modes were found in the compression of the specimens with various t/l. These modes transitioned from plastic buckling to fracture, and then to rapid densification without plastic buckling and fracture, depending on t/l. The sharp increase in the horizontal strain and the suppression of the decrease in the porosity occurred simultaneously when σ increased sharply again, irrespective of the structure and heat treatment of the specimens; this was observed as the plateau end.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 1. J. Banhart: Prog. Mater. Sci., 2001, vol. 46, pp. 559-632.10.1016/S0079-6425(00)00002-5 ↗
2. M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley: Metal Foams: A Design Guide, 1st ed., Butterworth-Heinemann, United States of America, pp. 150-156.
3. ISO 13314: Mechanical Testing of Metals, The International Organization for Standardization, Geneva.
4. 4. L. J. Gibson and M. F. Ashby: Cellular solids structure and properties, 2nd ed., Pergamon Press, Oxford, 1997, pp. 163-197.10.1017/CBO9781139878326 ↗
5. 5. A. E. Simone and L. J. Gibson: Acta Mater., 1998, vol. 46, pp. 2139-2150.10.1016/S1359-6454(97)00421-7 ↗
6. 6. J. W. Klintworth and W. J. Stronge: Int. J. Mech. Sci., 1988, vol. 30, pp. 273-292.10.1016/0020-7403(88)90060-4 ↗
7. 7. S. D. Papka and S. Kyriakides: J. Mech. Phys. Solids, 1994, vol. 42, pp. 1499-1532.10.1016/0022-5096(94)90085-X ↗
8. 8. H. Harders, K. Hupfer and J. Rösler: Acta Mater., 2005, vol. 53, pp. 1335-1345.10.1016/j.actamat.2004.11.025 ↗
9. 9. D. Karagiozova and T. X. Yu: Int. J. Mech. Sci., 2004, vol. 46, pp. 1489-1515.10.1016/j.ijmecsci.2004.09.010 ↗
10. 10. X. Yue, K. Matsuo and K. Kitazono: Mater. Trans., 2017, vol. 58, pp. 1587-1592.10.2320/matertrans.L-M2017834 ↗
11. 11. A.-F. Bastawros, H. Bart-Smith and A.G. Evans: J. Mech. Phys. Solids, 2000, vol. 48, pp. 301-322.10.1016/S0022-5096(99)00035-6 ↗
12. 12. B. Gorny, T. Niendorf, J. Lackmann, M. Thoene, T. Troester and H. J. Maier: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7962-7967.10.1016/j.msea.2011.07.026 ↗
13. 13. H. Bart-Smith, A.-F. Bastawros, D. R. Mumm, A. G. Evans, D. J. Sypeck and H. N. G. Wadley: Acta Mater., 1998, vol. 46, pp. 3583-3592.10.1016/S1359-6454(98)00025-1 ↗
14. 14. I. Jeon, T. Asahina, K. Kang, S. Im and T. J. Lu: Mech. Mater., 2010, vol. 42, pp. 227-236.10.1016/j.mechmat.2010.01.003 ↗
15. 15. M. Saadatfar, M. Mukherjee, M. Madadi, G. E. Schröder-Turk, F. Garcia-Moreno, F. M. Schaller, S. Hutzler, A. P. Sheppard, J. Banhart and U. Ramamurty: Acta Mater., 2012, vol. 60, pp. 3604-3615.10.1016/j.actamat.2012.02.029 ↗
16. 16. J. Ichikawa, S. Suzuki, T. Hayashida, R. Yahara and H. Nakae: Mater. Trans., 2012, vol. 53, pp. 1790-1794.10.2320/matertrans.MAW201211 ↗
17. D. Muto, T. Yoshida, T. Tamai, and S. Suzuki: Mater. Trans., 2019, vol. 60 (In press).10.2320/matertrans.L-M2019806 ↗
18. 18. S.K. Hyun, K. Murakami, and H. Nakajima: Mater. Sci. Eng. A, 2001, vol. 299, pp. 241-248.10.1016/S0921-5093(00)01402-7 ↗
19. 19. T. Ide, M. Tane, T. Ikeda, S. K. Hyun and H. Nakajima: J. Mater. Res., 2006, vol. 21, pp. 185-193.10.1557/jmr.2006.0016 ↗
20. 20. M. Tane, T. Ichitsubo, M. Hirao and H. Nakajima: Mech. Mater., 2007, vol. 39, pp. 53-63.10.1016/j.mechmat.2006.02.008 ↗
21. 21. K. Hokamoto, M. Vesenjak and Z. Ren: Mater. Lett., 2014, vol. 137, pp. 323-327.10.1016/j.matlet.2014.09.039 ↗
22. 22. M. Vesenjak, K. Hokamoto, S. Matsumoto, Y. Marumo and Z. Ren: Mater. Lett., 2016, vol. 170, pp. 39-43.10.1016/j.matlet.2016.01.143 ↗
23. 23. M. Vesenjak, K. Hokamoto, M. Sakamoto, T. Nishi, L. Krstulovic-Opara and Z. Ren: Mater. Des., 2016, vol. 90, pp. 867-890.10.1016/j.matdes.2015.11.038 ↗
24. 24. J. Ichikawa, T. Hayashida and S. Suzuki: Mater. Sci. Forum, 2013, vol. 761, pp. 151-155.10.4028/www.scientific.net/MSF.761.151 ↗
25. 25. T. Yoshida, D. Muto, T. Tamai and S. Suzuki: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 2463-2470.10.1007/s11661-018-4584-5 ↗
26. Japanese Industrial Standards Committee: JIS H 4040 Aluminium and Aluminium Alloy Bars and Wires, Japanese Standards Association, Tokyo, 2015.
27. 27. E. Tanaka, S. Semoto and Y. Suzuki: J. Jpn. Inst. Met. Mater., 1964, vol. 28, pp. 228-236.10.2320/jinstmet1952.28.4_228 ↗
28. 28. M. Mijalković, M. Trajković and B. Milošević: Facta. Univ., 2008, vol. 6, pp. 75-88.10.2298/FUACE0801075M ↗