MicroROM: A Physics-Based Constitutive Model for Ni-Based Superalloys
Source abstract
Abstract
In this article, a physics-based constitutive model is developed for representing the stress–plastic strain response of Ni-based superalloys by considering the hardening mechanisms that contribute to the macroscopic yield stress and the subsequent strain-hardening response in order to derive the entire tensile stress–strain curve. It is demonstrated that the log stress vs log plastic strain curves of Ni-based superalloys such as 702 Li and ME3 exhibit a bilinear behavior with a lower strain-hardening exponent in the low plastic strain regime and a much higher strain-hardening exponent in the high plastic strain regime. These two hardening regimes can be modeled on the basis of self-hardening of individual slip planes and latent hardening of five operative independent slip systems due to cross-slip from {111} planes to {001} planes, leading to the formation of incomplete and complete Kear-Wilsdorf locks. The proposed physics-based constitutive model, dubbed as MicroROM, exhibits a form that is similar to the Ramberg–Osgood (RO) constitutive model, which is widely used in structural analyses of engineering designs and components. MicroROM is applied to predict the tensile stress–strain curves of 720 Li and ME3 with either a subsolvus or supersolvus microstructure for temperatures ranging from 24 °C to 815 °C. The agreement is good between model predictions and experiment data from the literature. The sensitivity of the predicted stress–strain response to individual microstructural parameters is highlighted and the relation to individual hardening mechanisms is elucidated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40(7), pp. 1588-1603. https://doi.org/10.1007/s11661-009-9858-510.1007/s11661-009-9858-5 ↗
2. W.W. Milligan, E.L. Orth, J.J. Schirra, and M.F. Savage: Superalloys 2004, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2004, pp. 331-339.10.7449/2004/Superalloys_2004_331_339 ↗
3. T.P. Gabb, J. Telesman, P.T. Kantzos, and K. O’Connor: NASA/TM-2002-211796. NASA Glenn Research Center, Cleveland, OH, 2002.
4. T.P. Gabb, A. Garg, D.L. Ellis, and K.M. O’Connor: NASA/TM-2004-213066. NASA Glenn Research Center, Cleveland, OH, 2004.
5. T.P. Gabb, J. Gayda, J. Telesman, and A. Garg: Superalloys 2008, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2008, pp. 121-130.
6. D. Rice, P. Kantzos, B. Hann, J. Neumann, and R. Helmink: Superalloys 2008, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, pp. 139-147.
7. J. Telesman, P. Kantzos, J. Gayda, P.J. Bonacuse, and A. Prescenzi: Superalloys 2004, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2004, pp. 215-224.10.7449/2004/Superalloys_2004_215_224 ↗
8. W.D. Cao and R. Kennedy: Superalloys 2004, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2004, pp. 91-99.10.7449/2004/Superalloys_2004_91_99 ↗
9. R.L. Kennedy: Superalloys 718, 625, 706 and Derivatives 2005, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2005, pp 1-14.
10. D.P. Pope and S.S. Ezz: Int. Met. Rev., 1984, vol. 29(3), pp. 136-167.
11. K.J. Hemker, M.J. Mills, and W.D. Nix: J. Mater. Res., 1992, vol. 7(8), pp. 2059-2069.10.1557/JMR.1992.2059 ↗
12. D. Caillard and V. Paidar: Acta Mater., 1996, vol. 44(7), pp. 2759-2771.10.1016/1359-6454(95)00388-6 ↗
13. D. Caillard: Acta Mater., 1996, vol. 44(7), pp. 2773-2785.10.1016/1359-6454(95)00389-4 ↗
14. D. Caillard: Mater. Sci. Eng., A, 2001, vol. 319-321, pp. 74-83.10.1016/S0921-5093(00)02017-7 ↗
15. B.H. Kear and H.G.F. Wilsdorf: Trans. Metall. Soc. AIME, 1962, vol. 224, pp. 382-386.
16. Y.Q. Sun and P.M. Hazzledine: Philos. Mag. A, 1988, vol. 58(4), pp. 603-618.10.1080/01418618808209940 ↗
17. M.J. Mills and D.C. Chrzan: Acta Metall. Mater., 1992, vol. 40(11), pp. 3051-3064.10.1016/0956-7151(92)90468-T ↗
18. S.S. Ezz and P.B. Hirsch: Philos. Mag. A, 1994, vol. 69(1), pp. 105-127.10.1080/01418619408242213 ↗
19. T.A. Parthasarathy, S.I. Rao, and D.M. Dimiduk: Superalloys 2004, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2004, pp. 887-896.10.7449/2004/Superalloys_2004_887_896 ↗
20. L. Tabourot, M. Fivel, and E. Rauch: Mater. Sci. Eng., A, 1997, vol. 234-236, pp. 639-642.10.1016/S0921-5093(97)00353-5 ↗
21. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377-390.10.1016/j.actamat.2015.07.048 ↗
22. Y.C. Lin, X-M. Chen, D-X. Wen, and M-S. Chen: Comput. Mater. Sci., 2014, vol. 83, pp. 282-289.10.1016/j.commatsci.2013.11.003 ↗
23. W. Ramberg and W.R. Osgood: Technical Note 503: Determination of Stress–strain Curves by Three Parameters, National Advisory Committee on Aeronautics (NACA), 1941.
24. M.P. Jackson and R.C. Reed: Mater. Sci. Eng., A, 1999, vol. 259, pp. 85-97.10.1016/S0921-5093(98)00867-3 ↗
25. K. Gopinath, A.K. Gogia, S.V. Kamat, B. Balamuralikrishnan, and U. Ramamurty: Metall. Mater. Trans. A, 2008, vol. 39(10), pp. 340-2350.
26. A. Korner: Philos. Mag. Lett., 1989, vol. 60(3), pp. 103-110.10.1080/09500838908206443 ↗
27. A. Korner: Philos. Mag. A, 1991, vol. 63(3), pp. 407-421.10.1080/01418619108213888 ↗
28. E. Nadgornyi: Prog. Mater. Sci., 1988, vol. 31, pp. 493-505.10.1016/0079-6425(88)90005-9 ↗
29. J.F.W. Bishop and R.A. Hill: Philos. Mag., 1951, vol. 42(327), pp. 414-427.10.1080/14786445108561065 ↗
30. G.I. Taylor: Proc. R. Soc. London, 1934, vol. A145, pp. 362-387.10.1098/rspa.1934.0106 ↗
31. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537-562.
32. H. Mecking and Y. Estrin: Microstructure-related Constitutive Modelling of Plastic Deformation, Eighth International Symposium on Metallurgy and Material Science, Riso, Denmark, 1987.
33. Integrated Materials and Manufacturing Component Analysis for Life Management (IMCALM) Program, US Air Force Metal Affordability Initiative (Agreement Order No. FA8650-14-2-5211A0#40), Air Force Research Laboratory, Wright-Patterson AFB, Dayton, OH. Dr. Patrick Golden, Program Manager.
34. R. Madec, B. Devincre, and L.P. Kubin: Phys. Rev. Lett., 2002, 89(25), 25-33.10.1103/PhysRevLett.89.255508 ↗
35. B. Devincre, L. Kubin, and T. Hoc: Scr. Mater., 2006, vol. 54, pp. 741-746.10.1016/j.scriptamat.2005.10.066 ↗
36. D.M. Collins and H.J. Stone: Int. J. Plast., 2014, vol. 54, pp. 96-112.10.1016/j.ijplas.2013.08.009 ↗
37. D. Kuhlmann-Wilsdorf: Metall. Trans. A, 1985, vol. 16(12), pp. 2091-2108.10.1007/BF02670414 ↗
38. A. Vinogradov, I.S. Yasnikov, H. Matsuyama, M. Uchida, Y. Kaneko, and Y. Estrin: Acta Mater., 2016, vol. 106, pp. 295-303.10.1016/j.actamat.2016.01.005 ↗
39. F.C. Frank and W.T. Read: Phys. Rev., 1950, vol. 79, pp. 722-723.10.1103/PhysRev.79.722 ↗
40. A. Staroselsky and B.N. Cassenti: Mech. Mater., 2010, vol. 42, pp. 945-959.10.1016/j.mechmat.2010.07.005 ↗
41. E.O. Hall: Proc. Phys. Soc., Section B, 1951, vol. 64B(9), pp. 742-747.10.1088/0370-1301/64/9/302 ↗
42. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
43. L.A. Gypen and A. Deruyttere: J. Mater. Sci., 1977, vol. 12, pp. 1028-1033.10.1007/BF00540987 ↗
44. W. Huther and B. Reppich: Z. Metallkd., 1978, vol. 69(10), pp. 628-634.