journal article·2017-09

An Enhanced Steady-State Constitutive Model for Semi-solid Forming of Al7075 Based on Cross Model

Ramin Meshkabadi, Vahid Pouyafar, Akbar Javdani, Ghader Faraji

Publisher page

Abstract

The parameters of the Cross model were determined in a wide range of shear rates close to industrial conditions using rapid compression tests and backward extrusion experiments. The Cross model fitted well with experimental results at low shear rates, but it almost broke down at high shear rates. In this paper, a new steady-state model was proposed for semi-solid forming of Al7075 considering the effects of the yield stress, entrapped liquid, and shear rate using the Cross model. The yield stress of the alloy was estimated in the semi-solid state by extrapolating the viscosity at the least applicable shear rates. The results showed that the new model eliminated the Cross model’s deviations, and it can be used for accurate prediction of the steady-state flow behavior of the semi-solid alloy in a wide range of shear rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. L. Liang, Z. Mian: Comput. Mater. Sci., 2015, vol. 102, pp. 202-207.10.1016/j.commatsci.2015.02.033 ↗
2. H.V. Atkinson, D. Liu: Mater. Sci. Eng. A, 2008, vol. 496 (1), pp. 439-446.10.1016/j.msea.2008.06.013 ↗
3. K.N. Campo, C.T.W. Proni, E.J. Zoqui: Mater. Charact., 2013, vol. 85, pp. 26-37.10.1016/j.matchar.2013.08.011 ↗
4. V. Segal: Mater. Sci. Eng. A, 2003, vol. 345 (1), pp. 36-46.10.1016/S0921-5093(02)00258-7 ↗
5. G. Faraji, H. Kim: Mater. Sci. Technol., 2017, vol. 33, pp. 905-923.10.1080/02670836.2016.1215064 ↗
6. K.N. Campo, E.J. Zoqui: Metall. Mater. Trans. A, 2016, vol. 47 (4), pp. 1792-1802.10.1007/s11661-016-3339-4 ↗
7. D.H. Kirkwood, P.J. Ward: Steel Res. Int., 2004, vol. 75 (8/9), pp. 519-524.10.1002/srin.200405805 ↗
8. J. Wang, A. Phillion, G. Lu: J. Alloys Compd., 2014, vol. 609, pp. 290-295.10.1016/j.jallcom.2014.04.140 ↗
9. G. Chen, F. Lin, S. Yao, F. Han, B. Wei, Y. Zhang: J. Alloys Compd.,2016, vol. 674, pp. 26-36.10.1016/j.jallcom.2016.02.254 ↗
10. N. Kim, C. Kang: J. Mater. Process. Technol., 2000, vol. 103 (2), pp. 237-246.10.1016/S0924-0136(99)00441-0 ↗
11. P. Seo, H. Kim, C. Kang: J. Mater. Process. Technol., 2007, vol. 183 (1), pp. 18-32.10.1016/j.jmatprotec.2006.07.041 ↗
12. E. Mitsoulis: Rheol. Rev., 2007, vol. 2007, pp. 135-178.
13. M. Modigell, J. Koke: J. Mater. Process. Technol., 2001, vol. 111 (1), pp. 53-58.10.1016/S0924-0136(01)00496-4 ↗
14. S. Sannes, H. Gjestland, L. Arnberg, and J. Solberg: Proceedings of the Third International Conference on the Semi-Solid Processing of Alloys and Composites, 1994, pp. 271–80.
15. T. Liu, H. Atkinson, P. Kapranos, D. Kirkwood, S. Hogg: Metall. Mater. Trans. A, 2003, vol. 34 (7), pp. 1545-1554.10.1007/s11661-003-0266-y ↗
16. A.R.A. McLelland, N.G. Henderson, H.V. Atkinson, D.H. Kirkwood: Mater. Sci. Eng. A, 1997, vol. 232 (1), pp. 110-118.10.1016/S0921-5093(97)00105-6 ↗
17. V. Pouyafar, S. Sadough: Metall. Mater. Trans. B, 2013, vol. 44 (5), pp. 1304-1310.10.1007/s11663-013-9900-2 ↗
18. H.V. Atkinson: Prog. Mater. Sci., 2005, vol. 50 (3), pp. 341-412.10.1016/j.pmatsci.2004.04.003 ↗
19. V. Favier, H. Atkinson: Acta Mater., 2011, vol. 59 (3), pp. 1271-1280.10.1016/j.actamat.2010.10.059 ↗
20. V. Favier, P. Cezard, R. Bigot: Mater. Sci. Eng. A, 2009, vol. 517 (1), pp. 8-16.10.1016/j.msea.2009.03.018 ↗
21. S. Lee, S. Han, C. Kang: J. Mech. Sci. Technol., 2007, vol. 21 (10), pp. 1656-1662.10.1007/BF03177390 ↗
22. W.-z. Zhu, W.-m. Mao, T. Qin: Trans. Nonferrous Met. Soc. China, 2014, vol. 24 (4), pp. 954-960.10.1016/S1003-6326(14)63148-4 ↗
23. A. Bolouri, M. Shahmiri, C. Kang: J. Alloys Compd., 2011, vol. 509 (2), pp. 402-408.10.1016/j.jallcom.2010.09.042 ↗
24. R. Meshkabadi, G. Faraji, A. Javdani, V. Pouyafar: Trans. Nonferrous Met. Soc. China, 2016, vol. 26 (12), pp. 3091-3101.10.1016/S1003-6326(16)64441-2 ↗
25. J. Wang, D. Brabazon, A. Phillion, G. Lu, Metall. Mater. Trans. A, 2015, vol. 46 (9), pp. 4191-4201.10.1007/s11661-015-2990-5 ↗
26. J. Gebelin, M. Suery, D. Favier: Mater. Sci. Eng. A, 1999, vol. 272 (1), pp. 134-144.10.1016/S0921-5093(99)00467-0 ↗
27. W.R. Loue, M. Suery, and J. Querbes: Proceedings of the Second International Conference on the Semi-Solid Processing of Alloys and Composites, MIT, Cambridge (USA), 1992, pp. 266–75.
28. W.R. Loue: PhD Thesis, INP Grenoble, France, 1992.
29. W.R. Loue, S. Landkroon, W. Kool: Mater. Sci. Eng. A, 1992, vol. 151 (2), pp. 255-262.10.1016/0921-5093(92)90214-L ↗
30. V. Favier, H. Atkinson: Trans. Nonferrous Met. Soc. China, 2010, vol. 20 (9), pp. 1691-1695.10.1016/S1003-6326(09)60359-9 ↗
31. O. Ludwig, J.-M. Drezet, P. Ménésès, C. Martin, M. Suéry: Mater. Sci. Eng. A, 2005, vol. 413, pp. 174-179.10.1016/j.msea.2005.09.087 ↗
32. A.B. Phillion, S.L. Cockcroft, P.D. Lee: Acta Mater., 2008, vol. 56 (16), pp. 4328-4338.10.1016/j.actamat.2008.04.055 ↗
33. N. Jamaly, A. Phillion, J.-M. Drezet: Metall. Mater. Trans. B,2013, vol. 44 (5), pp. 1287-1295.10.1007/s11663-013-9902-0 ↗
34. S. Hogg, H. Atkinson, P. Kapranos: Metall. Mater. Trans. A, 2004, vol. 35 (3), pp. 899-910.10.1007/s11661-004-0015-x ↗
35. D. Kirkwood: Semisolid metal processing, Int. Mater. Rev., 2013.
36. H.A. Barnes, J.F. Hutton, and K. Walters: An Introduction to Rheology, Elsevier, Amsterdam, 1989.
37. D.H. Kirkwood, M. Suéry, P. Kapranos, H.V. Atkinson, and K.P. Young: Semi-solid processing of alloys, Springer, Berlin, 2010.10.1007/978-3-642-00706-4 ↗