A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions
Source abstract
Abstract
The flow-stress behavior at hot-working temperatures and strain rates of the powder-metallurgy superalloy LSHR was determined under nominally-isothermal and transient-heating conditions. Two conventional methods, compression of right-circular cylinders and torsion of thin-walled tubes, were used for isothermal tests. A direct-resistance-heating technique utilizing torsion of round-bar specimens in a Gleeble® machine was applied for both isothermal and transient-heating conditions. When expressed in terms of effective stress and strain, baseline data determined by the two conventional methods showed good agreement. With the aid of a flow-localization analysis to assess the confounding influence of axial (and radial) temperature gradients on deformation uniformity, the flow stresses determined from nominally-isothermal Gleeble® torsion tests were shown to be broadly similar to those from the conventional tests. With regard to transient phenomena, Gleeble® tests were also useful in quantifying the effect of rapid heating and short soak time on the observed higher flow stress associated with a metastable microstructure. The present work also introduces two new test techniques using direct-resistance-heated torsion specimens. One involves continuous heating under constant-torque conditions, and the other comprises testing an individual specimen at a series of temperatures and strain rates. Using a single specimen, the former method enabled the determination of the apparent activation energy for plastic flow, which was similar to that determined from the series of isothermal tests; the latter provided a low-cost, high-throughput approach to quantify the flow behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. S. Kobayashi, S.-I. Oh, and T. Altan: Metal Forming and the Finite Element Method, Oxford University Press, New York, 1989.10.1093/oso/9780195044027.001.0001 ↗
2. T. Altan, S.-I. Oh, and H.L. Gegel: Metal Forming: Fundamentals and Applications, ASM International, Materials Park, 1983.
3. T. Altan, G. Ngaile, and G. Shen: Cold and Hot Forging: Fundamentals and Applications, ASM International, Materials Park, 2004
4. D.U. Furrer and S.L. Semiatin, eds.: ASM Handbook Volume 22A: Fundamentals of Modeling for Metals Processing, 10th ed., ASM International, Materials Park, 2009.10.31399/asm.hb.v22a.9781627081962 ↗
5. D.U. Furrer and S.L. Semiatin, eds.: ASM Handbook Volume 22B: Metals Process Simulation, 10th ed., ASM International, Materials Park, 2010.10.31399/asm.hb.v22b.9781627081979 ↗
6. G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds.: Handbook of Workability and Process Design, ASM International, Materials Park, 2003.
7. G. Shen, S.L. Semiatin, E. Kropp, and T. Altan: J. Mater. Process. Technol., 1992, vol. 33, pp. 125–39.10.1016/0924-0136(92)90315-J ↗
8. S.L. Semiatin, F. Montheillet, G. Shen, and J.J. Jonas: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2719–27.10.1007/s11661-002-0394-9 ↗
9. D.D. Kautz: ASM Handbook Volume 6A: Welding Fundamentals and Processes, ASM International, Materials Park, 2011, pp. 179–85.
10. M.B. Uday, M.N. Ahmad Fauzi, H. Zuhailawati, and A.B. Ismail: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 534–58.10.1179/136217110X12785889550064 ↗
11. P.D. Nicolaou, R.E. Bailey, and S.L. Semiatin: in Handbook of Workability and Process Design, G.E. Dieter, H.A. Kuhn, and S.L. Semiatin, eds., ASM International, Materials Park, 2003, pp. 68–85.
12. H.G. Suzuki and H. Fujii: ISIJ Int., 1991, vol. 31, pp. 814–19.10.2355/isijinternational.31.814 ↗
13. H.G. Suzuki and D. Eylon: ISIJ Int., 1993, vol. 33, pp. 1270–74.10.2355/isijinternational.33.1270 ↗
14. H.G. Suzuki and D. Eylon: Mater. Sci. Eng. A, 1998, vol. A243, pp. 126–33.10.1016/S0921-5093(97)00789-2 ↗
15. F.F. Noecker II and J.N. DuPont: Weld. J., 2009, vol. 88 (#1), pp. 7s–20s.
16. S. Shi, J.C. Lippold, and J. Ramirez: Welding Journal, 2010, vol. 89 (#10), pp. 210s–17s.
17. S.S. Babu, J. Livingston, and J.C. Lippold: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3577–91.10.1007/s11661-013-1782-z ↗
18. O.N. Senkov, D.W. Mahaffey, S.L. Semiatin, and C. Woodward: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5545–61.10.1007/s11661-014-2512-x ↗
19. O.N. Senkov, D.W. Mahaffey, S.L. Semiatin, and C. Woodward: J. Mater. Eng. Perform., 2015, vol. 24, p. 1173–84.10.1007/s11665-014-1379-8 ↗
20. D.W. Mahaffey, O.N. Senkov, R. Shivpuri, and S.L. Semiatin: Metall. Mater. Trans. A, 2016, vol. 47A, p. 3981–4000.10.1007/s11661-016-3600-x ↗
21. J. Gayda, T.P. Gabb, and P.T. Kantzos: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
22. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, February 2005. http://gltrs.grc.nasa.gov)
23. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649–61.10.1007/s11661-011-1035-y ↗
24. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2778–98.10.1007/s11661-013-1675-1 ↗
25. S.L. Semiatin, J.M. Shank, A.R. Shiveley, W.M. Saurber, E.F. Gaussa, and A.L. Pilchak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6231–51.10.1007/s11661-014-2572-y ↗
26. S.L. Semiatin, S-L. Kim, F. Zhang, and J.S. Tiley: Metall. and Mater. Trans. A, 2015, vol. 46A, pp. 1715–30.10.1007/s11661-015-2748-0 ↗
27. S.I. Oh, S.L. Semiatin, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963–75.10.1007/BF02675571 ↗
28. U.S. Lindholm, A. Nagy, G.R. Johnson, and J.M. Hoegfeldt: J. Eng. Mat. Technnol. Trans. ASME, 1980, vol. 102, pp. 376–81.10.1115/1.3224827 ↗
29. S.L. Semiatin and J.H. Holbrook: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 1681–95.10.1007/BF02654396 ↗
30. S.C. Shrivastava, J. J. Jonas, and G. Canova: J. Mech. Phys. Solids, 1982, vol. 30, pp. 75–90.10.1016/0022-5096(82)90014-X ↗
31. D.S. Fields and W.A. Backofen: Proc. ASTM, 1957, vol. 57, pp. 1259–72.
32. S.L. Semiatin and J.J. Jonas, Formability and Workability of Metals: Plastic Instability and Flow Localization, ASM International, Materials Park, OH, 1984.
33. S.L. Semiatin, N. Frey, N.D. Walker, and J.J. Jonas: Acta Metall., 1986, vol. 34, pp. 167–76.10.1016/0001-6160(86)90244-0 ↗
34. F. Montheillet and J.J. Jonas: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3346–48.10.1007/BF02663887 ↗
35. Y. Ning, Z. Yao, X. Liang, and Y. Liu: Mater. Sci. Eng. A, 2012, vol. A551, pp. 7–12.10.1016/j.msea.2012.04.042 ↗
36. M. Detrois, R.C. Helmink, and S. Tin: Mater. Sci. Eng. A, 2013, vol. A586, pp. 236–44.10.1016/j.msea.2013.07.089 ↗
37. L. Briottet, J.J. Jonas, and F. Montheillet: Acta Mater., 1996, vol. 44, pp. 1665–7210.1016/1359-6454(95)00257-X ↗