Friction Stir Welding in Wrought and Cast Aluminum Alloys: Heat Transfer Modeling and Thermal History Analysis
Source abstract
Abstract
Friction stir welding (FSW) is a technique that can be used for materials joining and local microstructural refinement. Owing to the solid-state character of the process, FSW has significant advantages over traditional fusion welding, including reduced part distortion and overheating. In this study, a novel heat transfer model was developed to predict weld temperature distributions and quantify peak temperatures under various combinations of processing parameters for different wrought and cast Al alloys. Specifically, an analytical analysis was first developed to characterize and predict heat generation rate within the weld nugget, and then a two-dimensional (2D) numerical simulation was performed to evaluate the temperature distribution in the weld cross-section and top-view planes. A further three-dimensional (3D) simulation was developed based on the heat generation analysis. The model was validated by measuring actual temperatures near the weld nugget using thermocouples, and good agreement was obtained for all studied materials and conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith and C.J. Dawes: GB Patent Application No. 9125978.8, 1991.
2. C.J. Dawes and W.M. Thomas: TWI Bull. 6, 1995, pp. 124–27.
3. R.S. Mishra and Z.Y. Ma: Mat. Sci. Eng. R, 2005, 50: pp. 1–78.10.1016/j.mser.2005.07.001 ↗
4. [4] P.S. De, N. Kumar, J.Q. Su and R.S. Mishra: ASM Hand, vol. 6A, 2011, pp.186-200.
5. P. Dong, F. Lu and J.K. Hong: Sci. Technol. Weld. Joi, 2001, 6(5): pp. 281–87.10.1179/136217101101538884 ↗
6. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling and C.C. Bampton, Scripta Mater., 1997, 36: pp. 69–75.10.1016/S1359-6462(96)00344-2 ↗
7. L.E. Murr, G. Liu and J.C. McClure: J. Mater. Sci., 1998, 33: pp.1243–51.10.1023/A:1004385928163 ↗
8. C.M. Chen and R. Kovacevic: Int. J. Mach. Tool. Manuf., 2003, 43: pp. 1319–26.10.1016/S0890-6955(03)00158-5 ↗
9. S. Cartigueyena, O.P. Sukeshb and K. Mahadevanc: Proc. Eng., 2014, 97: pp. 1069–78.10.1016/j.proeng.2014.12.385 ↗
10. D. Deng and S. Kiyoshima: Comp. Mater. Sci., 2012, 62: pp. 23–24.10.1016/j.commatsci.2012.04.037 ↗
11. M. Song and R. Kovacevic: Int. J. Mach. Tool. Manuf., 2003, 43: pp. 605–1510.1016/S0890-6955(03)00022-1 ↗
12. M. Song and R. Kovacevic: Proc. Inst. Mech. Eng., B J. Eng. Manuf., 2002, 216(12): pp. 73–85.
13. A. Larsen: Int. J. Comput Aided Eng. Softw., 2012, 29(1): pp. 65–82.10.1108/02644401211190573 ↗
14. H.B. Schmidt and J.H. Hattel: Scripta Mater., 2008, vol. 58: pp. 332–37.10.1016/j.scriptamat.2007.10.008 ↗
15. M.Z.H. Khandkar, J.A. Khan and A.P. Reynolds: 6th international trends in welding research conference proceedings, Pine Mountain, 2002
16. C. Ma and S. Chang: Int. J. Heat Mass Transfer, 2004, 47: pp. 1643–55.10.1016/j.ijheatmasstransfer.2003.10.022 ↗
17. G. Buffa, A. Ducato and L. Fratini: Finite Elem. Anal. Des., 2011, 47(4): pp. 470–76.10.1016/j.finel.2010.12.018 ↗
18. Y.J. Chao and X. Qi, W. Tang: J. Manuf. Sci. E., 2003, 125: pp. 138–45.10.1115/1.1537741 ↗
19. J.G. Kaufman: Aluminum Alloy Database, Knovel, Norwich, 2004.
20. J. Arbegast William: Scripta Mater., 2008, 58: pp. 372–76.10.1016/j.scriptamat.2007.10.031 ↗
21. S. Tutunchilar, M. Haghpanahi, M.K. Besharati Givi, P. Asadi and P. Bahemmat: Mater. Des, 2012, 40: pp. 415–26.10.1016/j.matdes.2012.04.001 ↗