journal article·2016-11

Influence of the Initial Microstructure on the Heat Treatment Response and Tensile Properties of TRIP-Assisted Steel

Kyooyoung Lee, Joo Hyun Ryu, Sea Woong Lee, Won Hwi Lee, Jeong In Kim, Dong-Woo Suh

Publisher page

Abstract

Microstructure evolution and mechanical properties were investigated in transformation-induced plasticity (TRIP) steel having a different initial microstructure. Compared with the cold-rolled structure that evolves into a typical microstructure of TRIP steel, the martensitic initial structure produces a more lath-type microstructure as the fraction of retained austenite increases in the initial microstructure. The interlath austenite after heat treatment contributes to improving the tensile properties by the enhanced stability and the refinement of the matrix phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. 1. H.K.D.H. Bhadeshia and R. Honeycombe: Steels Microstructure and Properties, 3rd edition, Elsevier, Oxford, 2006.
2. 2. B.C. De Cooman, J.G. Speer, I.Y. Pyshmintsev, and N. Yoshinaga: Materials Design—The Key to Modern Steel Products, GRIPS media GmbH, Bad Harzburg, 2007.
3. 3. J. Bouquerel, K. Verbeken, and B.C. De Cooman: Acta Mater., 2006, vol. 54, pp. 1443-56.10.1016/j.actamat.2005.10.059 ↗
4. 4. T. De Cock, J.P. Ferrer, C. Capdevila, F.G. Caballero, V. López, and C. García de Andrés: Scripta Mater., 2006, vol. 55, pp. 441-3.10.1016/j.scriptamat.2006.05.027 ↗
5. 5. C.P. Scott and J. Drillet: Scripta Mater., 2007, vol. 56, pp. 489-92.10.1016/j.scriptamat.2006.11.033 ↗
6. 6. M.J. Merwin: Iron Steel Technol., 2008, vol. 5, pp. 66-84.
7. 7. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scripta Mater., 2010, vol. 63, pp. 815-8.10.1016/j.scriptamat.2010.06.023 ↗
8. 8. D.W. Suh, J.H. Ryu, M.S. Joo, H.S. Yang, K. Lee, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2013, vol. 44, pp. 286-93.10.1007/s11661-012-1402-3 ↗
9. 9. K. Sugimoto, A. Nagasaka, M. Kobayashi, and S. Hashimoto: ISIJ Int., 1999, vol. 39, pp. 56-63.10.2355/isijinternational.39.56 ↗
10. 10. K. Sugimoto, K. Nakano, S.M. Song, and T. Kashima: ISIJ Int., 2002, vol. 42, pp. 450-5.10.2355/isijinternational.42.450 ↗
11. 11. K. Sugimoto, A. Kanda, R. Kikuchi, S. Hashimoto, T. Kashima, and S. Ikeda: ISIJ Int., 2002, vol. 42, pp. 910-5.10.2355/isijinternational.42.910 ↗
12. 12. O. Kwon, K. Lee, G. Kim, and K. Chin: Mater. Sci. Forum, 2010, vols. 638-642, pp. 136-41.10.4028/www.scientific.net/MSF.638-642.136 ↗
13. 13. J.J. Yi, I.S. Kim, and H.S. Choi: Metall. Trans. A, 1985, vol. 16, pp. 1237-45.10.1007/BF02670328 ↗
14. 14. R. Wei, M. Enomoto, R. Hadian, H.S. Zurob, and G.R. Purdy: Acta Mater., 2013, vol. 61, pp. 697-707.10.1016/j.actamat.2012.10.019 ↗
15. J.I. Kim, J.H. Ryu, S.W. Lee, K. Lee, Y.U. Heo, and D.W. Suh: Metall. Mater. Trans. A, DOI:10.1007/s11661-016-3672-7.10.1007/s11661-016-3672-7 ↗
16. 16. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721-7.
17. 17. H. Maruyama: J. Jpn. Soc. Heat Treat., 1977, vol. 17, pp. 198-204.
18. 18. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin, Solid State Mater. Sci., 2004, vol. 8, pp. 219-37.10.1016/j.cossms.2004.09.003 ↗
19. 19. U.K. Viswanathan, T.R.G. Kutty, and C. Ganguly: Metall. Trans. A, 1993, vol. 24, pp. 2653-6.10.1007/BF02659489 ↗
20. 20. H.E. Kissinger: Anal. Chem., 1957, vol. 29, pp. 1702-6.10.1021/ac60131a045 ↗
21. 21. J.Y. Kang, S.J. Park, D.W. Suh, and H.N. Han: Mater. Charac., 2013, vol. 84, pp. 205-5.10.1016/j.matchar.2013.08.002 ↗
22. 22. A.W. Wilson and G. Spanos: Mater. Charac., 2001, vol. 46, pp. 407-8.10.1016/S1044-5803(01)00140-1 ↗
23. A.F. Gourgues, H.M. Flower, and T.C. Lindley: Mater. Sci. Tech., vol. 16, pp. 26–40.
24. 24. M. Natori, Y. Futamura, T. Tsuchiyama, and S. Takaki: Scripta Mater., 2005, vol. 53, pp. 603-8.10.1016/j.scriptamat.2005.04.025 ↗
25. 25. T. Tsuchiyama, M. Natori, N. Nakada, and S. Takaki: ISIJ Int., 2010, vol. 50, pp. 771-3.10.2355/isijinternational.50.771 ↗
26. 26. J. Wang and S.V.D. Zwaag: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1527-39.10.1007/s11661-001-0240-5 ↗
27. 27. D.W. Suh, S.J. Park, C.H. Lee, and S.J. Kim: Metall. Mater. Trans. A, 2009, vol. 40, pp. 264-8.10.1007/s11661-008-9734-8 ↗