Mechanical and Microstructural Characterization of an Aluminum Bearing Trip Steel
Source abstract
Abstract
The mechanical properties and microstructural characteristics of a steel able to sustain the TRIP-effect were studied. The material was prepared by taking in mind the partial substitution of silicon by aluminum following a processing route that included hot forging, hot and cold rolling, intercritical annealing, and a final bainitic isothermal treatment. The mechanical properties that were obtained resulted to be above those of commercial a 780 TRIP steel. The TRIP phenomenon was confirmed by the change in retained austenite before and after deforming the steel; X-ray diffraction was used to evaluate the volume content of retained austenite. Formability of the steel under study can be rationalized in terms of the texture developed in the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. P. Jacques, Q. Furnemont, F. Lani, T. Pardoen and F. Delannay: Acta Mater., 2007, 55, 3681-3693.10.1016/j.actamat.2007.02.029 ↗
2. R. Petrov, L. Kestens and Y. Houbaert: ISIJ Int., 2001, 41, 883-890.10.2355/isijinternational.41.883 ↗
3. L. Skalova, R. Divisova and D. Jandova: J. Mater. Process. Tech.,2006, 175, 387-392.10.1016/j.jmatprotec.2005.04.067 ↗
4. J. Zrnik, O. Muransky, P. Lukas, Z. Novy, P. Sittner and P. Hornak: Mater. Sci. Eng. A, 2006, A437, 114-119.10.1016/j.msea.2006.04.067 ↗
5. A. Airod, R. Petrov, R. Colás and Y. Houbaert: ISIJ Int., 2004, 44, 179-186.10.2355/isijinternational.44.179 ↗
6. M. De Meyer, D. Vanderschueren and B. De Cooman (1999) ISIJ Int. 39:813-22.10.2355/isijinternational.39.813 ↗
7. H.K. Bhadeshia: Bainite in steels, 2nd Ed., The Institute of Materials, London, U.K., 2001.
8. P. Jacques, F. Delannay, X. Cornet, P. Harlet and J. Ladriere: Metall. Mater. Trans. A, 1998, 29A, 2383-2393.10.1007/s11661-998-0114-1 ↗
9. Z. Li, D. Wu and H. Lu: J. Iron Steel Res. Int., 2008, 15, 55-60.10.1016/S1006-706X(08)60012-6 ↗
10. M. Cai, H. Ding, J. Zhang, L. Li, X. Li, and L. Du: J. Iron Steel Res. Int., 2009, 16, 55-60.10.1016/S1006-706X(09)60028-5 ↗
11. P. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Humbeeck and F. Delannay: ISIJ Int., 2001, 41, 1068-1074.10.2355/isijinternational.41.1068 ↗
12. S. Papaefthymiou, W. Bleck, S. Kruijver, J. Sietsma, L. Zhao and S. Van der Zwaag: Mat. Sci. Tech., 2004, 20, 201-206.
13. B. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, 8, 285-303.10.1016/j.cossms.2004.10.002 ↗
14. J. Maki, J. Mahieu, B. De Cooman and S. Claessens: Mater. Sci. Tech., 2003, 19, 125-131.10.1179/026708303225009300 ↗
15. E. Bellhouse and J. McDermid: Mater. Sci. Eng. A, 2008, A491, 39-46.10.1016/j.msea.2007.12.033 ↗
16. K.W. Andrews: J. Iron Steel Inst., 1965, 203, 721-727.
17. A.A Gorni: Steel Forming and Heat Treating Handbook, Sao Vicente, 2011.
18. R.A. Grange: Met. Progr., 1961, 70 (4), 73-75.
19. O.G. Kasatkin, B.B. Vinokur and V.L. Pilyushenko: Met. Sc. Heat Treat., 1984, 26, 27-31.10.1007/BF00712859 ↗
20. J.K. Lee, K.J. Lee and H.N. Han: POSCO Technical Research Laboratories Report, Pohang, 1999.
21. J.S. Kirkaldy and D. Venugopalan: Prediction of microstructure and hardenability in low-alloy steels. In A.R. Marder and J.I. Goldstein (Eds.) International Conference on Phase Transformation in Ferrous Alloys, pp 125-148, TMS, Philadelphia, 1983.
22. P. Payson and C.H. Savage: Trans. ASM, 1944, 33, 261-280.
23. W. Steven and A.G. Haynes: J. Iron Steel Inst., 1956, 183, 349-359.
24. B. Cullity: Elements of X-ray Diffraction, 2nd Ed., Addison-Wesley Publishing, New York, 1972.
25. D.J. Dyson and B. Holmes: J. Iron Steel Inst., 1970, 208, 469-474.
26. R. Ray and J. Jonas: Int. Mater. Rev, 1990, 35, 1-36.10.1179/095066090790324046 ↗
27. R. Ray, J. Jonas and R. Hook: Int. Mater. Rev., 1994, 39, 129-172.10.1179/imr.1994.39.4.129 ↗
28. J. Gautam, R. Petrov, E. Leunis and L. Kestens: Steel Res. Int., 2011, 82, 881-885.10.1002/srin.201100074 ↗
29. E. Jiménez-Melero, N. Van Dijk, L. Zhao, J. Sietsma, S. Offerman, J. Wright and S. Van der Zaag: Acta Mater., 2009, 57, 533–543.10.1016/j.actamat.2008.09.040 ↗