Investigation of Oxide Bifilms in Investment Cast Superalloy IN100: Part I. Mechanical Properties
Source abstract
Abstract
Oxide bifilms are a proposed casting inclusion reported to have been observed in vacuum investment cast polycrystalline Ni-based superalloys. Ongoing research seeks to determine if current superalloy casting practices can result in the formation of oxide bifilms, and subsequently if it is possible to observe and characterize this phenomenon. The effects of casting atmosphere, turbulence, filtering, hot isostatic pressing (HIP), and heat treatment have been investigated to identify the critical parameters that have been reported to result in bifilm formation in Ni-based superalloys. Room temperature tensile and room temperature fatigue testing are used to identify the effects of each casting and processing parameter on casting defect formation and the resultant effects on mechanical properties. Characterization of mechanical test specimens seeks to identify the role of casting defects and microstructural features on the fracture mechanisms of the specimen conditions analyzed, and in particular, evidence of bifilm formation and the chemical composition(s) of oxide bifilms. Analyzed tensile and fatigue data did not indicate an influence of bifilms on the tensile or fatigue strength of vacuum processed IN100. Bifilms were not observed, via the characterization methods utilized, to be an active mechanism in tensile or fatigue fracture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. J. Campbell and M. Tiryakioglu: Metall. Trans. B, 2012, vol. 43B, pp. 902-914.10.1007/s11663-012-9655-1 ↗
2. A. Rashid and J. Campbell: Metall. Trans. A, 2004, vol. 35A, pp. 2063-2071.10.1007/s11661-004-0155-z ↗
3. J. Campbell: Mater. Sci. Tech., 2006, vol. 22, pp. 127-145.10.1179/174328406X74248 ↗
4. J. Campbell: Castings the New Metallurgy of Cast Metals, Butterworth Heinemann, Burlington, pp. 17-69, 2003.10.1016/B978-075064790-8/50019-X ↗
5. J. Campbell: Int. J. Metalcast., 2012, vol. 6, pp. 7-18.10.1007/BF03355529 ↗
6. D. Dispinar and J. Campbell: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3860-3865.10.1016/j.msea.2011.01.084 ↗
7. D. Dispinar, S. Akhtar, A. Nordmark, M. DiSabatino, and L. Arnberg: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3719-3725.10.1016/j.msea.2010.01.088 ↗
8. D. Li, J. Campbell, and Y. Li: J. Mater. Process. Tech., 2004, vol. 148, pp. 310-316.10.1016/j.jmatprotec.2004.02.032 ↗
9. J. Staley, M. Tiryakioglu, and J. Campbell: Mater. Sci. Eng. A, 2007, vol. 465, pp. 136-145.10.1016/j.msea.2007.02.009 ↗
10. J. Staley, M Tiryakioglu, and J. Campbell: Mater. Sci. Eng. A, 2007, vol. 460, pp. 324-334.10.1016/j.msea.2007.01.049 ↗
11. M. Tiryakioglu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1560-1564.10.1016/j.msea.2009.10.027 ↗
12. M. Tiryakioglu, J. Staley, and J. Campbell: Mater. Sci. Eng. A, 2008, vol. 487, pp. 383-387.10.1016/j.msea.2007.11.005 ↗
13. J. Campbell: Mater. Sci. Tech., 2008, vol. 24, pp. 875-879.10.1179/174328408X307139 ↗
14. D. Dispinar and J. Campbell: J. Mater. Process. Tech., 2006, vol. 182, pp. 405-410.10.1016/j.jmatprotec.2006.08.021 ↗
15. X. Dai, X. Yang, J. Campbell, and J. Wood: Mater. Sci. Eng. A, 2003, vol. 354, pp. 315-325.10.1016/S0921-5093(03)00021-2 ↗
16. S. Fox and J. Campbell: Scripta Mater., 2000, vol. 43, pp. 881-886.10.1016/S1359-6462(00)00506-6 ↗
17. M. Felberbaum and M. Rappaz: Acta Mater., 2011, vol. 59, pp. 6849-6860.10.1016/j.actamat.2011.07.005 ↗
18. A. Rashid and J. Campbell: Metall. Trans. A, 2004, vol. 35A, pp. 2063-2071.10.1007/s11661-004-0155-z ↗
19. J. Campbell: Metall. Trans. B, 2011, vol. 42B, pp. 1091-1097.10.1007/s11663-011-9575-5 ↗
20. G. Bozchaloei, N. Varahram, P. Davami, and S. Kim: Mater. Sci. Eng. A, 2012, vol. 548, pp. 99-105.10.1016/j.msea.2012.03.097 ↗
21. G. Eisaabadi, P. Davami, S. Kim, and N. Varahram: Mater. Sci. Eng. A, 2012, vol. 552, pp. 36-47.10.1016/j.msea.2012.04.111 ↗
22. M. Tiryakioglu, J. Campbell, and C. Nyahumwa: Metall. Trans. B, 2011, vol. 42B, pp. 1098-1103.10.1007/s11663-011-9577-3 ↗
23. Q. Wang, C. Davidson, J. Griffiths, and P. Crepeau: Metall. Trans. B, 2006, vol. 37B, pp. 887-895.10.1007/BF02735010 ↗
24. E. Rincon, H. Lopez, M. Cisneros, and H. Mancha: Mater. Sci. Eng. A, 2009, vol. 519, pp. 128-140.10.1016/j.msea.2009.05.022 ↗
25. M. Tiryakioglu, J. Campbell, and J. Staley: Scripta Mater., 2003, vol. 49, pp. 873-878.10.1016/S1359-6462(03)00439-1 ↗
26. C. Lee: Mater. Sci. Eng. A, 2013, vol. 565, pp. 187-195.10.1016/j.msea.2012.12.029 ↗
27. C. Nyahumwa, N. Green, and J. Campbell: Metall. Trans. A, 2001, vol. 32, pp. 349-358.10.1007/s11661-001-0266-8 ↗
28. B. Eisaabadi, P. Davami, S. Kim, and M. Tiryakioglu: Mater. Sci. Eng. A, 2013, vol. 579, pp. 64-70.10.1016/j.msea.2013.05.014 ↗
29. T. Denda, P. Bretz, and J. Tien: Metall. Trans. A, 1992, vol. 23, pp. 519-526.10.1007/BF02801169 ↗
30. R. Miner: Superalloys II: High-Temperature Materials for Aerospace and Industrial Power, In: C. Sims, N. Stoloff, and W. Hagel eds., High-Temperature Materials for Aerospace and Industrial Power, Wiley, New York, 1984.
31. M. Gell, G. Leverant, and C. Wells: Achievement of High Fatigue Resistance in Metals and Alloys, ASTM, Philadelphia, 1970, pp. 113-53.10.1520/STP26842S ↗
32. M. Donachie and S. Donachie: A Technical Guide, ASM International, Materials Park, 2002, pp. 50-56.10.31399/asm.tb.stg2.9781627082679 ↗
33. G. Maurer: In: J. Tien and T. Caulfield, eds., Superalloys, Supercomposites, and Superceramics. Academic Press, Boston, 1989, pp. 49-96.10.1016/B978-0-12-690845-9.50009-9 ↗
34. R. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, Wiley, New York, 1996, pp. 521-91.
35. D. Furrer: Forging of Nickel-Base Alloys, ASM Handbook, ASM International, Materials Park, 2005. pp. 324-30