A Hydrogen-Induced Decohesion Model for Treating Cold Dwell Fatigue in Titanium-Based Alloys
Source abstract
Abstract
Cold dwell fatigue in near-alpha Ti alloys is a time-dependent fracture process at ambient temperature that involves fatigue in the presence of creep to produce cracking on low-energy fracture (e.g., cleavage) facets in hard alpha grains. In this article, cold dwell fatigue is treated as a hydrogen-induced decohesion process by using a nonlinear cohesive stress-strain relation to describe the decrease in the cohesive strength with increasing local hydrogen contents. It is postulated that during cold dwell fatigue, time-dependent deformation occurs by 〈a〉 slip that results in dislocation pileups in soft alpha grains. The stress and dilatational fields of the dislocation pileups assist the transport of internal hydrogen atoms from soft grains to neighboring hard grains. The accumulation of internal hydrogen atoms at the trap sites leads to decohesion along crystallographic planes, which can be slip or hydride habit planes. The decohesion model is applied to treat cold dwell fatigue in Ti-6Al-4V with a basal-transverse texture by modeling the effects of hydrogen-induced decohesion on the stress-fatigue life (S-N f) response, the time-dependent crack growth response (da/dt), and the fracture toughness (K c) as functions of grain orientation. A probabilistic time-dependent fatigue crack growth analysis is then performed to assess the influence of microtexture on the dwell fatigue life of a Ti-6Al-4V ring disk subjected to a long-duration hold at the peak stress of the loading cycle. The results of the probabilistic life computations indicate that dwell fatigue resistance in Ti-6Al-4V may be improved and the risk of disk fracture may be reduced significantly by controlling the microtexture or reducing the size and volume fraction of hard alpha grains in the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. S.H.K. Fitch and K.S. Chan: “Life and Reliability Prediction for Turbopropulsion Systems, Phase II Final Report,” Contract No. N68335-11-C-0171-P00001, Elder Research, Inc., Charlottesville, VA, June 2014.
2. 2. H.J. Maier, R.G. Teteruk, and H.-J. Christ: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 431–44.10.1007/s11661-000-0280-2 ↗
3. 3. R. Gaddam, B. Sefer, R. Pederson, and M.-L. Antti: IOP Conf. Series: Mater. Sci. Eng., 2013, vol. 48, p. 012002.10.1088/1757-899X/48/1/012002 ↗
4. 4. M.R. Bache: Int. J. Fatigue, 1999, vol. 21, pp. S105–S111.10.1016/S0142-1123(99)00061-4 ↗
5. M. Whittaker (2011) in E. Banini (ed) Titanium in the Gas Turbine Engine, Advances in Gas Turbine Technology. InTech, Rejeka, pp. 315–36.
6. 6. W.J. Evans: Fat. Fract. Eng. Mater. Struct., 2004, vol. 27, pp. 543–57.10.1111/j.1460-2695.2004.00793.x ↗
7. J. Dai, N.J. Marchand, and M. Hongoh: Thermomechanical Fatigue Behavior of Materials: Second Volume, ASTM STP 1263, M.J. Verrilli and M.G. Castelli, eds., ASTM International, West Conshohocken, PA, 1996, pp. 187–209.10.1520/STP16454S ↗
8. 8. A.L. Pilchak, A. Bhattacharjee, A.H. Rosenberger, and J.C. Williams: Int. J. Fatigue, 2009, vol. 31, pp. 989–94.10.1016/j.ijfatigue.2008.03.036 ↗
9. 9. C. J. Szczepanski, S.K. Jha, J.M. Larsen, and J.W. Jones: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2841–51.10.1007/s11661-008-9633-z ↗
10. 10. C. C. Wojcik, K.S. Chan, and D.A. Koss: Acta Metall., 1988, vol. 36, pp. 1261–70.10.1016/0001-6160(88)90278-7 ↗
11. 11. A.W. Bowen: Acta Metall., 1975, vol. 23, pp. 1401–09.10.1016/0001-6160(75)90149-2 ↗
12. 12. W. J. Evans: J. Mater. Sci. Lett., 1987, vol. 6, pp. 571–74.10.1007/BF01739287 ↗
13. 13. W.J. Evans and C.R. Gostelow: Metall. Mater. Trans. A, 1979, vol. 10A, pp. 1837–46.10.1007/BF02811727 ↗
14. 14. E. Tal-Gutelmacher and D. Eliezer: Mater. Trans., 2004, vol. 45, pp. 1594–1600.10.2320/matertrans.45.1594 ↗
15. N.R. Moody and J.E. Costa: Microstructure/Property Relationships in Titanium Aluminides and Alloys, Y.-W. Kim and R.R. Boyer, eds, TMS, Warrendale, PA, 1991, 587–604.
16. 16. W.J. Evans: Scripta Metall., 1987, vol. 21 (4), pp. 469–74.10.1016/0036-9748(87)90183-9 ↗
17. 17. J.E. Hack and G.R. Leverant: Metall. Trans. A, 1982, vol. 13A, pp. 1729–38.10.1007/BF02647828 ↗
18. 18. J.E. Hack and G.R. Leverant: Scripta Metall., 1980, vol. 14 (4), pp. 437–41.10.1016/0036-9748(80)90341-5 ↗
19. W.J. Evans: Proceedings of 3rd International Conference on Creep and Fracture of Engineering Materials and Structures, B. Wilshire and R.W. Evans, eds., Institute of Metals, London, 1987, pp. 603–13.
20. 20. C.A. Stubbington and S. Pearson: Eng. Fract. Mech., 1978, vol. 10, pp. 723–56.10.1016/0013-7944(78)90030-9 ↗
21. W.J. Evans and M.R. Bache: Int. J Fatigue, 1994, vol. 16 (7), pp. 443–52.10.1016/0142-1123(94)90194-5 ↗
22. 22. M.R. Bache: Int. J. Fatigue, 2003, vol. 25, pp. 1079–87.10.1016/S0142-1123(03)00145-2 ↗
23. 23. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1000–27.10.1007/s11661-010-0507-9 ↗
24. J.C. Williams and N.J. Blackburn: Phys. Status Solidi, 1968, vol. 25 (K1), pp. 10.1 and 21.10.1002/pssb.19680250146 ↗
25. 25. M.J. Blackburn and J.C. Williams: Trans. ASM, 1969, vol. 62, pp. 398–409.
26. 26. V. Sinha, M.J. Mills, and J.C. Williams: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2015–26.10.1007/s11661-006-0144-5 ↗
27. 27. E. Uta, N. Gey, P. Bocher, M. Humbert, and J. Gilgert: J. Microsc., 2009, vol. 233 (3), 451–59.10.1111/j.1365-2818.2009.03141.x ↗
28. 28. D.S. Shih, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1988, vol. 36 (1), pp. 111–24.10.1016/0001-6160(88)90032-6 ↗
29. 29. I.M. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross, and K.E. Nygren: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2323–41.10.1007/s11661-015-2836-1 ↗
30. 30. R.A. Oriani: Ber. Bunsen. Gesellsch. Phys. Chem., 1972, vol. 76 (8), pp. 848–57.10.1002/bbpc.19720760864 ↗
31. C.J. McMahon: in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds. TMS-AIME, Warrendale, PA, 1981, pp. 219–33.
32. 32. K.S. Chan, Y.D. Lee, and Y.-M. Pan: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 523–37.10.1007/s11661-006-0024-z ↗
33. 33. P. Blaha, K. Schwarz, P. Sorantin, and S.B. Trickey: Comput. Phys. Comm., 1990, vol. 59, pp. 399–415.10.1016/0010-4655(90)90187-6 ↗
34. 34. J.R. Rice and J.-S. Wang: Mater. Sci. Eng., 1989, vol. A107, pp. 23–40.10.1016/0921-5093(89)90372-9 ↗
35. K.S. Chan: Metall. Mater. Trans. A, 2015, vol. 46A, DOI:10.100/s11661-015-2860-1.
36. 36. N.E. Paton, B.S. Hickman, and D.H. Leslie: Metall. Trans., 1972, vol. 2, pp. 2791–96.10.1007/BF02813253 ↗
37. 37. W.J. Pardee and N.E. Paton: Metall. Trans. A, 1980, vol. 11A, pp. 1391–1400.10.1007/BF02653494 ↗
38. 38. M.F. Kanninen and C.H. Popelar: Advanced Fracture Mechanics, Oxford University Press, New York, NY, 1985, pp. 145–46.
39. 39. J.B. Bi, C. Prioul, and D. Francois: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1185–97.10.1007/BF02652293 ↗
40. 40. J. Gu and D. Hardie: Mater. Sci. Technol., 1996, vol. 12, pp. 802–07.10.1179/mst.1996.12.10.802 ↗
41. L.J. Teutonico: in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisde, eds., Pergamon Press, Oxford, United Kingdom, 1970, pp. 425–32.10.1016/B978-0-08-006564-9.50052-X ↗
42. 42. J.R. Rice: J. Mech. Phys. Solids, 1992, vol. 40, pp. 239–71.10.1016/S0022-5096(05)80012-2 ↗
43. 43. R.E. Peierls: Proc. Phys. Soc., 1940, vol. 52, pp. 34–37.10.1088/0959-5309/52/1/305 ↗
44. 44. F.R.N. Nabarro: Proc. Phys. Soc., 1947, vol. 59, pp. 236–39410.1088/0959-5309/59/2/309 ↗
45. K.S. Chan and M.P. Enright: J. Eng. Gas Turbines Power, 2006, vol. 128, pp. 889–95.10.1115/1.2180811 ↗
46. 46. M.D. Raizenne: Laboratory Memorandum ST-49, National Aeronautical Establishment, Ottawa, ON, Canada, Sept. 1994.
47. A.J.A. Mom and M.D. Raizenne: AGARD Report No. 766, Aug. 1988.
48. Damage Tolerant Design Handbook, Purdue University, West Lafayette, IN, 1994, vol. 3, WL-TR-94-4043.
49. 49. B.L. Boyce and R.O. Ritchie: Eng. Fract. Mech., 2001, vol. 68, pp. 129–47.10.1016/S0013-7944(00)00099-0 ↗
50. K.S. Chan, M.P. Enright, J. Moody, and S.H.K. Fitch: Int. J. Fatigue, 2015. DOI:10.1016/j.ijfatigue.2015.03.02.
51. 51. P.J. Bania and D. Eylon: Metall. Mater. Trans. A, 1978, vol. 9A, pp. 847–55.10.1007/BF02649795 ↗
52. N.R. Moody and W.W. Gerberich: ICM, 1979, vol. 2, pp. 513–23.
53. 53. N.R. Moddy and W.W. Gerberich: Metall. Trans. A, 1980, vol. 11A, pp. 973–81.10.1007/BF02654711 ↗
54. H.L. Prekel and H. Conrad: in Dislocation Dynamics, A.R. Rosenfield, G.T. Hahn, A.L. Bennet, Jr., and R.I. Jaffee, eds., McGraw-Hill, New York, NY, 1968, pp. 431–52.
55. U.S. Department of Transportation, Federal Aviation Administration, “Advisory Circular—Damage Tolerance for High Energy Turbine Engine Rotors,” AC33.14-1, Washington, DC, 2001.
56. DARWIN ® User’s Guide, Southwest Research Institute, San Antonio, TX, 2011.
57. 57. A. Zarkades and F.R. Larson: “Texture of Ti-6A1-4V as Affected by Rolling Temperature,” AD A021405, Army Materials and Mechanics Research Center, Watertown, MA, Dec. 1975.10.21236/ADA021405 ↗
58. 58. J.H. Rose, J.R. Smith, and J. Ferranie: Phys. Rev. B, 1983, vol. 28, pp. 1835–45.10.1103/PhysRevB.28.1835 ↗
59. A.L. Pilchak: Scripta Mater, 2015, vol. 68, pp. 277–80.10.1016/j.scriptamat.2012.10.041 ↗
60. 60. A.L. Pilchak: Scripta Mater., 2014, vol. 74, pp. 68–71.10.1016/j.scriptamat.2013.10.024 ↗