The Initiation and Propagation of Dynamic Abnormal Grain Growth in Molybdenum
Source abstract
Abstract
Plastic straining can initiate and propagate abnormal grains at temperatures significantly lower than is possible by static annealing. This phenomenon is termed dynamic abnormal grain growth (DAGG). Experiments that produce DAGG in commercial-purity molybdenum sheet materials are used to study the initiation and propagation of abnormal grains by plastic straining at temperatures from 1673 K to 2073 K (1400 $$^\circ $$ C to 1800 $$^\circ $$ C). The minimum strain necessary to initiate DAGG, termed the critical strain, decreases approximately linearly with increasing temperature. The variation in critical strain values observed at a single temperature and strain rate is well described by a normal distribution. An increased fraction of grains aligned with the $$\left\langle 110\right\rangle $$ along the tensile axis, a preferred orientation for DAGG grains, appears to decrease the critical strain for DAGG initiation. DAGG grains preferentially grow into the finest-grained polycrystalline regions, which suggests that the driving force for DAGG propagation is primarily from grain-boundary curvature. No effects of local crystallographic texture variation on growth are evident in microstructures containing DAGG grains. Together, these observations support the hypothesis that plastic straining during DAGG acts primarily to increase boundary mobility, rather than to increase the driving force for boundary migration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. J.G. Byrne, Recovery, recrystallization, and grain growth (The Macmillan Company, New York, 1965), p. 106
2. M. Hillert, Acta Metall. 13, 227–238 (1965)10.1016/0001-6160(65)90200-2 ↗
3. F. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd edn. (Elsevier, New York, 2004), pp. 24–25
4. V. Randle, Philos. Mag. A 67, 1301–1313 (1993)10.1080/01418619308225356 ↗
5. C. Briant, F. Zaverl, W. Carter, Acta Metall. Mater. 42, 2811–2821 (1994)10.1016/0956-7151(94)90222-4 ↗
6. S. Lee, D. Yoon, M. Henry, Acta Mater. 48, 3071–3080 (2000)10.1016/S1359-6454(00)00119-1 ↗
7. T. Fujii, Y. Hiraoka, and R. Watanabe, United States Patent No. 4,491,560, January 1 1985
8. K. Takebe and Y. Hiraoka: Japan Patent No. JP6248384, September 6, 1990
9. D. Dorner, S. Zaefferer, L. Lahn, D. Raabe, J. Magn. Magn. Mater. 304, 183–186 (2006)10.1016/j.jmmm.2006.02.116 ↗
10. C. Musiol, Met. Technol. (London) 3, 173–182 (1976)10.1179/030716976803391692 ↗
11. A.D. Rollett, A.P. Brahme, C. Roberts, Mater. Sci. Forum 558, 33–42 (2007)10.4028/www.scientific.net/MSF.558-559.33 ↗
12. J. Ciulik, E. Taleff, Scr. Mater. 61, 895–898 (2009)10.1016/j.scriptamat.2009.07.021 ↗
13. D.L. Worthington, N.A. Pedrazas, P.J. Noell, E.M. Taleff, Metall. Mater. Trans. A 44, 5025–5038 (2013)10.1007/s11661-013-1865-x ↗
14. N.A. Pedrazas, T.E. Buchheit, E.A. Holm, E.M. Taleff, Mater. Sci. Eng. A 610, 76–84 (2014)10.1016/j.msea.2014.05.031 ↗
15. A. Rollett, W. Mullins, Scr. Mater. 36, 975–980 (1997)10.1016/S1359-6462(96)00501-5 ↗
16. Y.C. Zhu, J.H. Mao, F.T. Tan, X.L. Qiao, Appl. Mech. Mater. 127, 89–94 (2012)10.4028/www.scientific.net/AMM.127.89 ↗
17. T.A. Bennett, P.N. Kalu, A.D. Rollett, Microsc. Microanal. 17, 362 (2011)10.1017/S1431927611000377 ↗
18. A. Agnoli, M. Bernacki, R.E. Logé, J.-M. Franchet, J. Laigo, and N. Bozzolo: Superalloys 2012: The 12th International Symposium on Superalloys, 2012, pp. 73–8210.1002/9781118516430.ch8 ↗
19. P. Lin, G. Palumbo, J. Harase, K. Aust, Acta Mater. 44, 4677–4683 (1996)10.1016/S1359-6454(96)00140-1 ↗
20. F. Humphreys, Acta Mater. 45, 4231–4240 (1997)10.1016/S1359-6454(97)00070-0 ↗
21. J. Ciulik, E. Taleff, Mater. Sci. Eng. A 463, 197–202 (2007)10.1016/j.msea.2006.09.113 ↗
22. ASTM International, Standard Specification for Molybdenum and Molybdenum Alloy Plate, Sheet, Strip and Foil, Standard Designation B 306–03 (ASTM International, West Conshohocken, PA, 2003)
23. ASTM International, Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys, Standard Designation E 1941–04 (ASTM International, West Conshohocken, PA, 2008)
24. R. Barto, L. Ebert, Metall. Trans. 2, 1643–1649 (1971)10.1007/BF02913888 ↗
25. HKL Channel 5, Oxford Instruments PLC, Oxon
26. ASTM International, Standard Test Methods for Determining Average Grain Size, Standard Designation E 112–13, ASTM International, West Conshohocken, 2013
27. W. Green, M. Smith, and D. Olson: Trans. Metall. Soc. AIME, 1959, vol. 215, pp. 1061–66
28. G. Gottstein, L. Shvindlerman, Acta Metall. Mater. 41, 3267–3275 (1993)10.1016/0956-7151(93)90056-X ↗
29. G. Gottstein, L.S. Shvindlerman, Grain Boundary Migration in Metals: Thermodynamics, Kinetics, Applications, 2nd edn. (CRC Press, New York, 2009), pp. 140–14410.1201/9781420054361 ↗