The effect of gravity on solution-reprecipitation during liquid phase sintering
Source abstract
Abstract
Solution-reprecipitation during liquid phase sintering can lead to gravity-aligned gradients in the amount of refractory phase as a result of the interaction between gravitational forces and capillary forces. We provide an anlaysis of this mechanism for gradient formation and show that for most important engineering materials, solution-reprecipitation does not cause substantial gravity-induced gradients. This conclusion is in agreement with published data for tungsten heavy alloy materials containing volume fractions of solids greater than about 0.7 at the sintering temperature. Macrostructural gradients in liquid phase sintered materials have been reported in the literature; however, these materials contain sufficient liquid at the sintering temperature that solid grains settle within the liquid, perhaps contributing to the observed gradients.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. C. Kipphut, A. Bose, S. Farooq, and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 1905–13.10.1007/BF02645192 ↗
2. S.C. Yang and R.M. German: Metall. Trans. A, 1991, vol. 22A, pp. 786–91.10.1007/BF02670302 ↗
3. Y. Liu, D.F. Heaney, and R.M. German: Acta Metall. Mater., 1995, vol. 43, pp. 1587–92.10.1016/0956-7151(94)00363-M ↗
4. R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
5. J.L. Johnson, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 857–66.10.1007/s11663-998-0145-4 ↗
6. A.N. Niemi and T.H. Courtney: Acta Metall., 1983, vol. 31, pp. 1393–1401.10.1016/0001-6160(83)90009-3 ↗
7. D.F. Heaney, R.M. German, and I.S. Ahn: Advances in Powder Metallurgy & Particulate Materials, Metal Powder Industries Federation, Princeton, NJ, 1993, pp. 169–80.
8. T.H. Courtney: Scripta Mater., 1996, vol. 35, pp. 567–71.10.1016/1359-6462(96)00191-1 ↗
9. W.D. Kingery and M. Berg: J. Appl. Phys., 1955, vol. 26, pp. 1205–12.10.1063/1.1721874 ↗
10. W.D. Kingery, J.M. Woulbroun, and F.R. Charvat: J. Am. Cer. Soc., 1963, vol. 46, pp. 391–95.10.1111/j.1151-2916.1963.tb11758.x ↗
11. G.H. Gessinger, H.F. Fischmeister, and H.L. Lukas: Acta Metall., 1973, vol. 21, pp. 715–24.10.1016/0001-6160(73)90082-5 ↗
12. J. Svoboda, H. Riedel, and R. Gaebel: Acta Mater., 1996, vol. 44, pp. 3215–26.10.1016/1359-6454(95)00440-8 ↗
13. A. Mortensen: Acta Mater., 1997, vol. 45, pp. 749–58.10.1016/S1359-6454(96)00202-9 ↗
14. P.E. McHugh and H. Riedel: Acta Mater., 1997, vol. 45, pp. 2995–3003.10.1016/S1359-6454(96)00378-3 ↗
15. D.N. Yoon and W.J. Huppmann: Acta Metall., 1979, vol. 27, pp. 693–98.10.1016/0001-6160(79)90020-8 ↗
16. W.J. Huppmann: Z. Metallkd., 1979, vol. 70, pp. 792–97.
17. W.A. Kaysser and G. Petzow: Powder Metall., 1985, vol. 28, pp. 145–50.10.1179/pom.1985.28.3.145 ↗
18. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985, p. 240.10.1007/978-1-4899-3599-1 ↗
19. S.J.L. Kang, K.H. Kim, and D.N. Yoon: J. Am. Cer. Soc., 1991, vol. 74, pp. 425–27.10.1111/j.1151-2916.1991.tb06900.x ↗
20. S.M. Lee and S.J.L. Kang: Acta Mater., 1998, vol. 46, pp. 3191–3203.10.1016/S1359-6454(97)00489-8 ↗
21. H.H. Park, S.J. Cho, and D.N. Yoon: Metall. Trans. A, 1984, vol. 15A, pp. 1075–80.10.1007/BF02644700 ↗
22. H.H. Park, S.J.L. Kang, and D.N. Yoon: Metall. Trans. A, 1986, vol. 17A, pp. 325–30.10.1007/BF02643908 ↗
23. R.M. German: Particle Packing Characteristics, Metal Powder Industries Federation, Princeton, NJ, 1989, p. 443.
24. D. Bouvard and E. Ouedraogo: Powder Technol., 1986, vol. 46, pp. 255–62.10.1016/0032-5910(86)80034-1 ↗
25. R.M. German, Y. Liu, and A. Griffo: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 215–21.10.1007/s11661-997-0098-2 ↗
26. R. Ganesan, A. Griffo, and R.M. German: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 659–64.10.1007/s11661-998-0146-6 ↗
27. A.B. Rodriguez and J.G. Sevillano: in Tungsten and Tungsten Alloys, A. Bose and R.J. Dowding, eds., Metal Powder Industries Federation, Princeton, NJ, 1992, pp. 61–68.
28. R. Raman and R.M. German: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 653–59.10.1007/BF02663915 ↗
29. A. Upadhyaya, R.G. Iacocca, and R.M. German: JOM, 1999, vol. 51, pp. 37–4010.1007/s11837-999-0078-7 ↗
30. A Upadhyaya and R.M. German: 14th Plansee Seminar 1997, Proc. Conf., Reutte, Tirol, Austria, 1997, G. Kneringer, P. Rodhammer, and P. Wilhartitz, eds., RWF Werbegesellschaft, pp. 68–85.
31. A. Upadhyaya and R.M. German: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2631–38.10.1007/s11661-998-0235-6 ↗