journal article·2004-06

A study on the microstructural evolution of Al-25 at. pct V-12.5 at. pct M (M = Cu, Ni, Mn) powders by planetary ball milling

Keun Young Chang, Kyoung Il Moon, Kyung Sub Lee

Publisher page

Abstract

The alloying behavior of Al-25 at. pct V-12.5 at. pct M (M = Cu, Ni, Mn) by planetary ball milling of elemental powders hours as been investigated in this study. In Al3V binary system, an amorphous phase was produced after 6 hours and the amorphous phase was mechanically crystallized after 20 hours. The large difference in the diffusivities between Al and V atoms in Al matrix results in the formation of the amorphous phase when the homogeneous distribution of all the elements in a powder was achieved at 6 hours. According to thermal analyses, the amorphous phase in the binary Al3V was crystallized at 350 °C. The addition of ternary elements (Cu, Ni, Mn) increased the activation energy for the crystallization to D022 phase by interfering with the diffusion process. Therefore, ternary element addition improved the thermal stability of the amorphous structures. The amorphous phase in the 12.5 at. pct Ni added Al3V was crystallized to D022 phase at 540 °C. The mechanical crystallization of the amorphous phase in the ternary element-added Al-V system either occurred later or was not observed during ball milling up to 100 hours. It is thought that the amorphous intermetallic compacts could be produced more easily in ternary element-added alloys by using an advanced consolidation method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. N.S. Stoloff: High Temperature Ordered Intermetallic Alloys, Materials Research Society Symposium Proceeding, MRS, Pittsburgh, PA, 1995, vol. 39, p. 3.
2. D.P. Pope: in High Temperature Ordered Intermetallic Alloys II, N.S. Stoloff, C.C. Koch, C.T. Liu, and O. Izumi, eds., MRS, Pittsburgh, PA, 1987, pp. 3–11.
3. Y. Umakoshi, M. Yamaguchi, T. Sakagami, and T. Yamane: J. Mater. Sci., 1989, vol. 24, pp. 1599–1603.10.1007/BF01105677 ↗
4. C.T. Liu: in Alloy Phase Stability, G.M. Stocks and A. Gonis, eds., Kluwer, Dordrecht, 1989, pp. 7–21.10.1007/978-94-009-0915-1_2 ↗
5. K.S. Kumar: in Physical Metallurgy and Processing of Intermetallic Compounds, N.S. Stoloff and V.K. Sikka, eds., Chapman & Hall, New York, NY, 1997, pp. 392–416.
6. P.B. Desch, P.B. Schwarz, and P. Nash: J. Less-Common Met., 1991, vol. 168, pp. 69–80.10.1016/0022-5088(91)90035-3 ↗
7. P.B. Desch, P.B. Schwarz, and P. Nash: Scripta Metall. Mater., 1996, vol. 34, pp. 37–43.10.1016/1359-6462(95)00468-8 ↗
8. G.J. Fan, X.P. Song, M.X. Quan, and Z.Q. Hu: Mater. Sci. Eng., 1997, vol. A231, pp. 111–6.10.1016/S0921-5093(97)00035-X ↗
9. J.H. Schneibel, J.A. Horton, and W.D. Porter: Mater. Sci. Eng., 1992, vol. A152, pp. 126–31.10.1016/0921-5093(92)90057-8 ↗
10. Z.L. Wu, D.P. Pope, and V. Vitek: Scripta Metall. Mater., 1990, vol. 24, pp. 2187–90.10.1016/0956-716X(90)90508-E ↗
11. C.C. Koch: in Mechanical Alloying, P.H. Shingu, ed., Trans Tech Publications, Zurich, 1992, pp. 243–62.
12. M. Yamaguchi, Y. Shirai, and Y. Umakoshi: in Dispersion Strengthened Aluminum Alloys, Y.-W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1988, pp. 721–40.
13. L. Lu and M.O. Lai: Mechanical Alloying, Kluwer Academic Publishers, Boston, MA, 1998, pp. 89–90.10.1007/978-1-4615-5509-4 ↗
14. C.C. Koch: Nanostr. Mater., 1997, vol. 9, pp. 13–22.10.1016/S0965-9773(97)00014-7 ↗
15. M.L. Trudeau: Appl. Phys. Lett., 1994, vol. 64, pp. 3661–3.10.1063/1.111953 ↗
16. K.I. Moon, K.Y. Chang, and K.S. Lee: J. Alloys Compounds, 2000, vol. 312, pp. 273–83.10.1016/S0925-8388(00)01101-4 ↗
17. R.B. Schwarz and W.L. Johnson: Phys. Rev. Lett., 1983, vol. 51, pp. 415–8.10.1103/PhysRevLett.51.415 ↗
18. C.C. Koch, O.B. Calvin, C.G. Mckamey, and J.O. Scarbrough: J. Appl. Phys. Lett., 1983, vol. 43, pp. 1017–19.10.1063/1.94213 ↗
19. H.J. Fecht, G. Han, Z. Fu, and W.L. Johnson: J. Appl. Phys., 1990, vol. 67, pp. 1744–48.10.1063/1.345624 ↗
20. E. Hellstern and L. Schultz: J. Appl. Phys., 1988, vol. 63, pp. 1408–13.10.1063/1.339972 ↗
21. C. Suryanarayana, G.H. Chen, A. Frefer, and F.H. Froes: Mater. Sci. Eng., 1992, vol. A158, pp. 93–101.10.1016/0921-5093(92)90139-R ↗
22. J.A. Hawk, L.M. Angers, and H.G.F. Wilsdorf: in Dispersion Strengthened Aluminum Alloys, Y.-W. Kim and W.M. Griffith, eds., TMS, Warrendale, PA, 1988, pp. 337–54.
23. Smithells Metals Reference Book, 6th ed., E.A. Brandes ed., Butterworths & Co. (Publishers) Ltd., London, 1983, p. 13–1.
24. A.K. Sinha: Trans. TMS-AIME, 1969, vol. 245, p. 237.
25. A.K. Sinha: Trans. TMS-AIME, 1969, vol. 245, p. 911.
26. J.H.N. van Vucht and K.H.J. Buschow: J. Less-Common Met., 1965, vol. 10, p. 98.10.1016/0022-5088(66)90118-4 ↗
27. N. Durlu, O.T. Inal, and F.G. Yost: Scripta Metall. Mater., 1991, vol. 25, pp. 2475–79.10.1016/0956-716X(91)90052-3 ↗
28. N. Durlu and O.T. Inal: J. Mater. Sci., 1992, vol. 27, pp. 1175–78.10.1007/BF01142016 ↗
29. N. Durlu and O.T. Inal: J. Mater. Sci., 1992, vol. 27, pp. 3225–30.10.1007/BF01116017 ↗
30. A.E. Carlsson and P.J. Meschter: J. Mater. Res., 1989, vol. 4, pp. 1060–64.10.1557/JMR.1989.1060 ↗
31. A.E. Carlsson and P.J. Meschter: J. Mater. Res., 1990, vol. 5, pp. 2813–18.10.1557/JMR.1990.2813 ↗
32. Smithells Metals Reference Book, E.A. Brandes; ed., 6th ed., Butterworths & Co. (Publishers) Ltd., London, 1983, pp. 13–15.
33. H.E. Kissinger: Anal. Chem., 1957, vol. 29, p. 1702.10.1021/ac60131a045 ↗