Deformation twinning and texture variation in Zr-2.5 pct Nb alloy during rolling
Source abstract
Abstract
Recently, it was proven that delayed hydride cracking (DHC) is accompanied by deformation twinning through the texture analysis of a fractured surface. Thus, in order to understand the operation of deformation twinning, the texture variations by rolling were investigated using Zr-2.5 pct Nb alloy with {11\(\bar 2\)0} 〈10\(\bar 1\)0〉 texture. It was observed that deformation twinning was operated predominantly in the range of a 5 to 15 pct strain. The basal poles were rotated in the normal direction of a rolling plane with the strain, and the (0002) texture was fully reversed after 15 pct strain. This finding was established to be due to the operation of the {10\(\bar 1\)2} and {11\(\bar 2\)1} twinning systems through the analysis of the inverse pole figure. It appeared that the degree and easiness of the twinning operation was affected by changing the direction of compression during rolling with respect to the initial {11\(\bar 2\)0} 〈10\(\bar 1\)0〉 texture. The contribution of deformation twinning to strain was quantitatively calculated using the change in the basal pole components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. K.F. Amouzouvi and L.J. Clegg: Metall. Trans. A, 1987, vol. 18A, p. 1687.10.1007/BF02646200 ↗
2. C.E. Coleman, B.A. Cheadle, C.D. Cann, and J.R. Theaker: ASTM STP 1295, ASTM, Philadelphia, PA, 1996, p. 84.
3. P.H. Davies and R.S.W. Shewfelt: ASTM STP 1295, ASTM, Philadelphia, PA, 1996, p. 492.
4. S. Sagat, C.E. Coleman, M. Griffiths, and B.J.S. Wilkins: ASTM STP 1245, ASTM, Philadelphia, PA, 1994, p. 35.
5. S.S. Kim and Y.S. Kim: J. Nucl. Mater., 2000, vol. 279, p. 286.10.1016/S0022-3115(99)00284-6 ↗
6. S.S. Kim, Y.S. Kim, K.S. Lim, Y.M. Cheong, and K.N. Choo: Proc. Korean Nuclear Society Fall Meeting, Seoul, 1999, p. 259.
7. Y.M. Cheong, S.S. Kim, and Y.S. Kim: J. Nucl. Mater., 2002, vol. 303, p. 83.10.1016/S0022-3115(02)00847-4 ↗
8. B.A. Cheadle, C.E. Coleman, and H. Licht: Nucl. Technol., 1982, vol. 57, p. 414.10.13182/NT82-A26307 ↗
9. S.S. Kim, Y.S. Kim, S.C. Kwon, S.B. Ahn, and K.N. Choo: Trans. 15th SMiRT (Sung Pil Chang), Seoul, 1999, p. 263.
10. W.M. Evans, R.F. Gessner, and J.G. Goodwin: Metall. Trans., 1972, vol. 3, p. 2879.10.1007/BF02652856 ↗
11. J.E. Winegar: Report No. AECL-5626, Atomic Energy of Canada Limited, 1977.
12. E. Tenckhoff: ASTM STP 966, ASTM, Philadelphia, PA, 1988, p. 3.