journal article·2013-05

The Mode of Deformation in a Cold-Swaged Multifunctional Ti-Nb-Ta-Zr-O Alloy

W. Guo, M. Z. Quadir, M. Ferry

Publisher page

Abstract

Multifunctional titanium alloys, termed Gum Metal™, are β-phase Ti alloys first developed in 2003. These alloys exhibit many interesting properties including, for example, low rate of work-hardening and superplasticity during cold deformation. The original report described a new plastic deformation mechanism not involving major dislocation activity to explain such deformation behavior. In the current study, a comparable Ti-36.8Nb-2.7Zr-2.0Ta-0.44O (wt pct) alloy to the original investigators was produced by powder sintering, hot forging, solution treatment, and cold swaging with the aim at investigating the microstructural development during swaging. XRD and TEM showed that the forged/solution-treated alloy was β-phase with a small amount of ω-phase. After cold swaging by up to 96 pct area reduction, TEM/HRTEM revealed the existence of dislocations, deformation twins, ω-phase, nanodisturbances, and lattice bending, with EBSD showing the grains to be highly elongated in the swaging direction, fragmented, and distorted. Most notably, swaging also generated a strong 〈110〉 fiber texture, even after moderate strains. The foregoing structural analysis provides substantial evidence that dislocations are present in the alloy after cold swaging. The major support of dislocation glide processes acting as the dominant plastic deformation mode in the swaged alloy is the strong 〈110〉 fiber texture that develops, which is a characteristic feature of all cold-drawn/swaged body centered cubic metals and alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. E.W. Collings: The Physical Metallurgy of Titanium Alloys (Metals Park: American Society for Metal, 1984).
2. C. Leyens and M. Peters: Titanium and Titanium Alloys, Wiley-VCH GmbH & Co. KGaA. 2003.10.1002/3527602119 ↗
3. T. Saito, T. Furuta, J. H. Hwang, S. Kuramoto,, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara and T. Sakuma: Science, 2003, vol. 300, pp. 464–67.10.1126/science.1081957 ↗
4. W. Guo, M. Z. Quadir, S. Moricca, T. Eddows and M. Ferry: unpublished research.
5. S. Hanada, M. Ozeki and O. Izumi: Metall. Trans A., 1985, vol. 16A, pp. 789–95.10.1007/BF02814829 ↗
6. S. Hanada, M. Ozeki and O. Izumi: Metall. Trans A., 1986, vol. 17A, pp. 1409–19.10.1007/BF02650122 ↗
7. T. W. Duerig, J. Albrecht, D. Richter and P. Fischer: Acta Metall., 1982, vol. 30, pp. 2161–72.10.1016/0001-6160(82)90137-7 ↗
8. T. Li, J. W. Morris Jr., N. Nagasako, S. Kuramoto and D. C. Chrzan: Phys. Rev. Lett., 2007, vol. 98, pp. 105503-1–4.10.1103/PhysRevLett.98.105503 ↗
9. M. Y. Gutkin, T. Ishizaki, S. Kuramoto and I. A. Ovid’ko: Acta Mater., 2006, vol. 54, pp. 2489–99.10.1016/j.actamat.2006.01.027 ↗
10. R. J. Talling, M. Jackson, R. J. Dashwood and D. Dye: Acta Mater., 2009, vol. 57, pp. 1188–98.10.1016/j.actamat.2008.11.013 ↗
11. Y. Yang, G. P. Li, G. M. Cheng, H. Wang, M. Zhang, F. Xu and K. Yang: Scripta Mater., 2008, vol. 58, pp. 9–12.10.1016/j.scriptamat.2007.09.010 ↗
12. Y. Yang, S. Q. Wu, G. P. Li, Y. L. Li, Y. F. Lu, K. Yang and P. Ge: Acta Mater., 2010, vol. 58, pp. 2778–87.10.1016/j.actamat.2010.01.015 ↗
13. H. Xing and J. Sun: App. Phys. Lett., 2008, vol. 93, p. 31908.10.1063/1.2959183 ↗
14. L.Q. Wang, W.J. Lu, J.N. Qin, F. Zhang and D. Zhang: Mater. Sci. Eng. A, 2008, vol. 490, pp. 421–26.10.1016/j.msea.2008.03.003 ↗
15. U.F. Kocks, C.N. Tomé, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, 1998.
16. W. Guo: PhD Thesis, The University of New South Wales, 2011.
17. F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science, New York, 2004.10.1016/B978-008044164-1/50016-5 ↗
18. S. K. Sikka, Y. K. Vohra and R. Chidambaram: Prog. Mater. Sci., 1982, vol. 27, pp. 245–310.10.1016/0079-6425(82)90002-0 ↗
19. T. Yano, Y. Murakami, D. Shindo and S. Kuramoto: Acta Mater., 2009, vol. 57, pp. 628–33.10.1016/j.actamat.2008.10.002 ↗
20. J. W. Morris Jr, Y. Hanlumyuang, M. Sherburne, E. Withey, D. C. Chrzan, S. Kuramoto, Y. Hayashi and M. Hara: Acta Mater., 2010, vol. 58, pp. 3271–80.10.1016/j.actamat.2010.02.001 ↗
21. R.W.K. Honeycombe, The Plastic Deformation of Metals (London: Edward Arnold, 1984).
22. C. Schuman, C. Elsing, M.J. Philippe, M. Hergesheimer, M. Jalloon and A. Lefort: Textures Microstrcutures, 1994, vol. 22, pp. 261–278.10.1155/TSM.22.261 ↗
23. J. Očenášek, M. R. Ripoll, S. M. Weygand and H. Riedel: Comp. Mater. Sci., 2007, Vol. 39, pp. 23–28.10.1016/j.commatsci.2006.01.024 ↗
24. J. F. Peck and D. A. Thomas: AIME, 1961, vol. 221, pp. 1240–47.
25. H. R. Z. Sandim, H. J. McQueen and W. Blum: Scripta Mater., 1999, vol. 42, pp. 151–56.10.1016/S1359-6462(99)00331-0 ↗
26. W. Y. Guo, H. Xing, J. Sun, X. L. Li, J. S. Wu and R. Chen: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 672–78.10.1007/s11661-007-9433-x ↗
27. M. Premkumar, V.S. Himabindu, S. Banumathy, A. Bhattacharjee, and A.K. Singh: Mater. Sci. Eng. A, 2012, vol. 552, pp. 15–25.10.1016/j.msea.2012.04.077 ↗
28. M. Tane, T. Nakano, S. Kuramoto, M. Hara, M. Niinomi, N. Takesue, T. Yano and H. Nakajima: Acta Mater., 2011, vol. 59, pp. 6975–88.10.1016/j.actamat.2011.07.050 ↗
29. Y. Ni, H. Y. Kim and S. Miazaki: J. Japan Inst. Metals, 2008, vol. 72, pp. 970–74.10.2320/jinstmet.72.970 ↗