journal article·2007-04

Process Parameters for Infrared Processing of FePt Nanoparticle Films

Adrian S. Sabau, Puja B. Kadolkar, Ralph B. Dinwiddie, Ronald D. Ott, Craig A. Blue

Publisher page

Abstract

Pulse thermal processing (PTP) of FePt nanoparticle films was studied using a high density infrared (HDI) plasma arc lamp. FePt nanoparticle films on silicon substrates were processed using 0.25- second infrared (IR) pulses. The processing was aimed at reaching a peak target temperature for multiple pulses of 550 C. Numerical simulations of the heat transfer for the PTP were performed to determine the operating power levels for the plasma arc lamp. Infrared measurements were conducted to obtain experimental data for the surface temperature of the FePt nanofilm. Parameters needed for the heat-transfer model were identified based on the experimental temperature results. Following the model validation, several numerical simulations were performed to estimate the power levels. It was shown that the FePt nanoparticle films were successfully processed using the power levels provided by the heat-transfer analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Phase-change materials and chalcogenides · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Sun. S., Murray C.B., Weller. D., Folks. L., Moser A. (2000). Science 287: 198910.1126/science.287.5460.1989 ↗
2. Zeng. H., Sun. S., Sandstrom R.L., Murray C.B. (2003). J Mag. Mag Mater. 266: 227–3210.1016/S0304-8853(03)00482-7 ↗
3. Klemmer T.J., Liu. C., Shukla. N., Wu X.W., Weller. D., Tanase. M., Laughlin D.E., Sofa W.A. (2003). J. Mag. Mag. Mater. 266: 79–8710.1016/S0304-8853(03)00458-X ↗
4. Kadolkar P.B., Ott R.D., Blue C.A., and A.S. Sabau: 2004 MRS Proc., Wang J.P., Ryan P.J., Nielsch. K., and Cheng. Z., eds., Materials Research Society, Pittsburgh, PA, 2004, 853E: I10.1.1– I10.1.14.
5. Ott R.D., Kadolkar P.B., Blue C.A., Cole A.C., Thompson G.B. (2004). JOM, 56(10): 45–4710.1007/s11837-004-0290-4 ↗
6. Blue C.A., Sikka V.K., Ohriner E.K., Engleman P.G., and D.C. Harper: JOM–e, 2000, vol. 52 (1).
7. Lee S.J., A.Yu C.C., C.Lo C.H., Fan M. (2004). Phys. Status Solidi A 201(13): 3031–3610.1002/pssa.200406866 ↗
8. J.Rivard D.K., Sabau A.S., Blue C.A., Ohriner E.K., Jayaraman N. (2003). Metall. Mater. Trans. A 34A: 3043–5410.1007/s11661-003-0202-1 ↗
9. Reddy A.V., Kothe D.B., Beckermann. C., Ferrell R.C., and K.L. Lam: Proc. 4th Int. Conf. on Solidification Processing, The University of Sheffield, Sheffield, United Kingdom, 1997.
10. Redmond. S., Rand S.C., Ruan X.L., Kaviany M. (2004). J. Appl. Phys 95(8): 4069–7710.1063/1.1667274 ↗
11. R. Siegel and J.R. Howell: Thermal Radiation Heat Transfer, 4th ed. Taylor and Francis, New York, NY, 2002: 91 and 795.
12. Bicanic. D., Gibkes. J., Bremer. M., and E. Akkermans: Progr. Nat. Sci., 1996, Suppl. 6: S569–S572.
13. A. Bejan: Convection Heat Transfer, 3rd ed., John Wiley & Sons, New York, NY, 2004.
14. Muzychka Y.S., Yovanovich M.M. (2004). ASME J. Heat Transfer 126: 54–6110.1115/1.1643752 ↗
15. A. Majumdar: Rohsenow Symp. on Future Trends in Heat Transfer, Cambridge, MA, May 16, 2003.
16. Hill R.F., Supancic P.H. (2004). J. Am. Ceram. Soc. 87: 1831–3510.1111/j.1151-2916.2004.tb06326.x ↗
17. P.J. Schneider: in Handbook of Heat Transfer Fundamentals, Rohsenow W.M., Hartnet J.P., and Ganic E.N., McGraw–Hill, New York, NY, 1985.
18. Shi. S., Kang. S., Lawson. J., Jia. Z., Nikles. D., Harrell J.W., Ott. R., P. Kadolkar: JOM, 58(6): 43–45.10.1007/s11837-006-0180-z ↗