journal article·2013-12

Modeling of Microindentation with Consideration of the Surface Roughness

Hun Guan Chuah, Zaidi Mohd Ripin

Publisher page

Abstract

A finite element model of a microindentation is developed where the scanned surface topography data which represent the actual surface-roughness values are used in the construction of the finite element model of the workpiece. Indentation simulation with friction effect solely due to the surface deformation produces results which match the experimental ones in terms of residual indent size and pile-up heights. A roughness-dependent friction model is developed, which is comparable with the models proposed by Johnson (1985) and Alcala (2004).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Adhesion, Friction, and Surface Interactions · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. K. Hiroshi, T. Makoto, and I. Kenji: Trans JWRI, 2006, vol. 35, pp. 57–61.
2. A.A. Elmustafa and D.S. Stone: J. Mech. Phys. Solids, 2003, vol. 51, pp. 357–81.10.1016/S0022-5096(02)00033-9 ↗
3. Y. Kusano and I.M. Hutchings: Surf. Coat. Technol., 2003, vol. 169, pp. 739–42.10.1016/S0257-8972(03)00132-4 ↗
4. G.M. Pharr, G.E. Hertbert, and Y. Gao: Annu. Rev. Mater. Res., 2010, vol. 40, pp. 271–92.10.1146/annurev-matsci-070909-104456 ↗
5. A.K. Nanda Kumar, M.D. Kannan, S. Jayakumar, K.S. Rajam, and V.S. Raju: Surf. Coat. Technol., 2006, vol. 201, pp. 3253–59.10.1016/j.surfcoat.2006.06.053 ↗
6. S.W. Wai, G.M. Spinks, H.R. Brown, and M. Swain: Polym. Test., 2004, vol. 23, pp. 501–07.10.1016/j.polymertesting.2004.01.001 ↗
7. M. Mata and J. Alcalá: J. Mech. Phys. Solids., 2004, vol. 52, pp. 145–65.10.1016/S0022-5096(03)00075-9 ↗
8. Z.H. Xu and J. Agren: Philos. Mag., 2004, vol. 84, pp. 2367–80.10.1080/14786430410001690015 ↗
9. W.D. Nix and H. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
10. T.H. Wang and T.H. Fang: Comput. Mater. Sci., 2009, vol. 46, pp. 1007–13.10.1016/j.commatsci.2009.05.004 ↗
11. X. Huang and A.A. Pelegri: Compos. Sci. Technol., 2007, vol. 67, pp. 1311–19.10.1016/j.compscitech.2006.10.005 ↗
12. W.C. Guo, G. Rauchs, W.H. Zhang, and J.P. Ponthot: J. Comput. Appl. Math., vol. 234, pp. 2183–92.10.1016/j.cam.2009.08.072 ↗
13. D.J. Strange and A.K. Varshneya: J. Mater. Sci., 2001, vol. 36, pp. 1943–49.10.1023/A:1017550008584 ↗
14. J.A. Greenwood and J.B.P. Williamson: Proc. R. Soc. A., 1996, vol. 259, pp, 300–19.
15. P. Berke, F. El Houdaigui, and T.J. Massart: Wear, 2010, vol. 268, pp. 223–32.10.1016/j.wear.2009.07.015 ↗
16. C. Walter and C. Mitterer: Surf. Coat. Technol., 2009, vol. 203, pp. 3286–90.10.1016/j.surfcoat.2009.04.006 ↗
17. M.S. Bobji and S.K. Biswas: J. Mater. Res., 1998, vol. 13, pp. 3227–33.10.1557/JMR.1998.0438 ↗
18. V.S. Deshpande, D.S. Balint, A. Needleman, and E Van der Giessen: Model Simul. Mater. Sci. Eng., 2007, vol. 15, pp. S98–S108.10.1088/0965-0393/15/1/S09 ↗
19. Y.A Karpenko and A.A. Akay: Tribol Int., 2001, vol. 34, pp. 531–45.10.1016/S0301-679X(01)00044-5 ↗
20. B.J. Briscoe, B. Scruton, and F.R. Willis: Proc. R. Soc. A., 1973, vol. 333, pp. 99–114.10.1098/rspa.1973.0050 ↗
21. J.Y. Kim, S.K. Kang, J.J. Lee, J.I. Jang, Y.H. Lee, and D. Kwon: Acta Mater., 2007, vol. 55, pp. 3555–562.10.1016/j.actamat.2007.02.006 ↗
22. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
23. J.P. Ponthot, W.C. Guo, G. Rauchs, W.H. Zhang: 2009, Tribology, vol. 3, pp. 151–157.
24. B. Bhushan: Nanotribology and Nanomechanics: An Introduction, Springer, Berlin, 2005, p. 776.10.1007/3-540-28248-3 ↗
25. D. Tabor: Proc. R. Soc. A., 1959, vol. 251, pp. 378–93.10.1098/rspa.1959.0114 ↗
26. L. Chang and H Zhang: ASME J. Appl. Mech., 2007, vol. 74, pp. 100–106.10.1115/1.2178838 ↗
27. M.T. Tilbrook, D.J. Paton, Z. Xie, and M. Hoffman: Acta Mater., 2007, vol. 55, pp. 2489–501.10.1016/j.actamat.2006.11.043 ↗
28. K.W. McElhaney, J.J. Vlassak, and W.D. Nix: J. Mater. Res., 1997, vol. 13, pp. 1300–306.10.1557/JMR.1998.0185 ↗
29. Y.M. Soifer and A. Verdyan: Phys. Status Solidi A., 2005, vol. 202, pp. 2454–61.10.1002/pssa.200520084 ↗
30. M.S. Kashani: PhD Thesis, Wichita State University, Kansas, May 2010.
31. H.G. Chuah and Z.M. Ripin: J. Mater. Sci. 2013. doi:10.1007/s10853-013-7429-z.10.1007/s10853-013-7429-z ↗
32. H. Pelletier, C. Gauthier, and R. Schirrer: Mater. Lett., 2009, vol. 63, pp. 1671–73.10.1016/j.matlet.2009.05.015 ↗
33. S.D. Mesarovic and N.A. Fleck: Proc. R. Soc. Lond., 1999, vol. 455, pp. 2707–28.10.1098/rspa.1999.0423 ↗
34. K.P. Shaha, T.Y. Pei, D. M. Martinez, J.Th.M. De Hosson: Tribol. Lett., 2011, vol. 41, pp. 97–101.10.1007/s11249-010-9691-4 ↗
35. K.L. Johnson: Contact Mechanic, Cambridge University Press, New York, 1985, p. 168.
36. R. Saha and W.D. Nix: Mater. Sci. Eng., 2001, vol. 319–321, pp. 898–901.10.1016/S0921-5093(01)01076-0 ↗
37. J. M. Antunes, L.F. Menezes and J.V. Fernandes: Surf. Coat. Technol., 2006, vol. 43, pp. 3–4.
38. J. M. Antunes, L.F. Menezes, and J.V. Fernandes: Int. J. Solids Struct., 2007, vol. 44, 2732–47.10.1016/j.ijsolstr.2006.08.017 ↗
39. A.K Bhattacharya and W.D. Nix: Int. J. Solids Struct., 1988, vol. 24, pp. 881–91.10.1016/0020-7683(88)90039-X ↗
40. J.M. Antunes, A. Cavaleiro, L.F. Menezes, M.I. Simões, and J.V. Fernandes: Surf. Coat. Technol., 2002, vol. 149, pp. 27–35.10.1016/S0257-8972(01)01413-X ↗