Preparation and Certification of Hydrogen in Titanium Alloy Standard Reference Materials
Source abstract
Abstract
A series of three hydrogen in titanium alloy Standard Reference Materials (SRMs 2452, 2453, and 2454) was prepared with hydrogen mass fractions bracketing the hydrogen specification limit of 125 mg/kg. Commercial titanium alloy Ti6Al4V (6 pct aluminum and 4 pct vanadium) was heated under vacuum in a furnace to remove native hydrogen, then it was doped with a measured quantity of hydrogen. Prompt gamma-ray activation analysis was used to determine hydrogen in the degassed material and finished SRMs. A combination of preparation data and PGAA measurement was used to certify the hydrogen mass fraction of each. The certified hydrogen mass fractions are 62.5 mg/kg ± 1.6 mg/kg for SRM 2452, 114 mg/kg ± 5 mg/kg for SRM 2453, and 211 mg/kg ± 4 mg/kg for SRM 2454.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Physics and Applications · Scientific Measurement and Uncertainty Evaluation · Radioactive Decay and Measurement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. D.N. Williams: Mater. Sci. Eng., 1976, vol. 24, pp. 53–63.10.1016/0025-5416(76)90094-X ↗
2. 1997 Annual Book of ASTM Standards, v. 03.06, ASTM, West Conshohocken, PA, 1997.
3. G.A. Uriano and C.C. Gravatt: CRC Crit. Rev. Anal. Chem., 1977, vol. 6, p. 361.10.1080/10408347708085697 ↗
4. D.A. Meyn: Metall. Trans., 1974, vol. 5, pp. 2405–14.10.1007/BF02644024 ↗
5. H.H. Chen-Mayer, D.F.R. Mildner, G.P. Lamaze, R.M. Lindstrom, R.L. Paul, V.V. Kvardakov, and W.J. Richards: Hydrogen in Semiconductors and Metals, MRS Symposium Proceedings, vol. 513, N.H. Nickel, W.B. Jackson, R.C. Bowman, and R.G. Leisure, eds., Materials Research Society, Warrendale, PA, 1998, pp. 191–96.10.1557/PROC-513-191 ↗
6. H.H. Chen-Mayer, D.F.R. Mildner, G.P. Lamaze, and R.M. Lindstrom: J. Appl. Phys., 2002, vol. 91, no. 6, pp. 3669–74.10.1063/1.1452769 ↗
7. R.L. Paul, H.M. Privett III, R.M. Lindstrom, W.J. Richards, and R.R. Greenberg: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3682–87.10.1007/BF02595460 ↗
8. R.M. Lindstrom and R.L. Paul: Hydrogen in Semiconductors and Metals, MRS Symposium Proceedings, vol. 513, N.H. Nickel, W.B. Jackson, R.C. Bowman, and R.G. Leisure, eds., Materials Research Society, Warrendale, PA, 1998, pp. 283–86.
9. R.L. Paul: Analyst, 1997, vol. 122, no. 3, pp. 35R-41R.10.1039/a606419a ↗
10. Certificates of Analysis for SRM 352a and SRM 354, http://www.nist.gov/srm, 2011.
11. R.L. Paul: J. Radioanal. Nucl. Chem., 1995, vol. 191, no. 2, pp. 245–56.10.1007/BF02038220 ↗
12. R.L. Paul, R.M. Lindstrom, and A.E. Heald: J. Radioanal. Nucl. Chem., 1997, vol. 215, no. 1, pp. 63–68.10.1007/BF02109879 ↗
13. R.L. Paul: Am. Lab., 2002, vol. 34, no. 3, pp. 15–20.
14. E.A. Mackey, D.L. Anderson, P.J. Liposky, R.M. Lindstrom, H. Chen-Mayer, and G.P. Lamaze: Nucl. Instrum. Meth. B, 2004, vol. 226, pp. 426–40.10.1016/j.nimb.2004.05.038 ↗
15. B. Fazekas, G. Molnár, T. Belgya, L. Dabolczi, and A. Simonits: J. Radioanal. Nucl. Chem., 1997, vol. 215, pp. 271–77.10.1007/BF02034477 ↗
16. Z. Révay, T. Belgya, P.P. Ember, and G.L. Molnár: J. Radioanal. Nucl. Chem., 2001, vol. 248, pp. 401–05.10.1023/A:1010688327371 ↗
17. R.L. Paul: Trans. Amer. Nucl. Soc., 2004, vol. 91, pp. 821–22.
18. B.N. Taylor and C.E. Kuyatt: NIST Technical Note 1297: “Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results,” U.S. Department of Commerce, 1994, p. 20.10.6028/NIST.TN.1297 ↗
19. E.A. Mackey, R.L. Paul, R.M. Lindstrom, D.L. Anderson, and R.R. Greenberg: J. Radioanal. Nucl. Chem., 2005, vol. 265, no. 2, pp. 273–81.10.1007/s10967-005-0820-8 ↗
20. R.E. Ricker and G.R. Myneni: International Symposium on the Superconducting Science and Technology of Ingot Niobium, G.R. Myneni, G. Ciovati, and M. Stuart, eds., AIP Conference Proceedings, 2010, vol. 1352, pp. 49–55.